Great video guys, The bracket on the drivers side under the bonnet with the bussman fuse holders, was that an off the shelf thing? What point was used for the earth inside the troopy?
Thanks mate, really appreciate the comments! The busbar was home made by Brando, not sure what he made it out of. I’ve ended up doing a similar thing in the 79, it’s in a recent video when we tidied up the engine bay. I got mine from springers. The earth as far as I can remember was taken from the negative of the cranking battery and run straight to the negative busbar behind the rogue. Hope this helps! Richo
@@MudModsBeers thank you for replying so fast. Awesome video, love the attention to detail with the wiring, labelling the wires, heat shrink over the conduit and going the extra step to add isolators to everything. Keep it up.
Hey mate, these are screw terminal strips. Easy to get at Jaycar and the likes. Can come in many different sizes and amps. Here’s a link to one - www.jaycar.com.au/10-amp-12-way-screw-terminal-strip/p/HM3196 Hope this helps!
Great Video Guys..!! What size Cable do you have on the mounting Board with the USBs ??? You mention 3mm Cable but the cable coming out of the USBs looks fairly thick !! like it is 5mm?? Cheers !!
Hey mate, thanks for the comments! Yes every cable is over engineered! For the USB’s it was a twin cable from memory, I’ll have to check but fairly sure it was 3mm, but run per socket, not daisy chained. Cheers mate!
Deutsch connectors are much better, it why they are heavily used in automotive industry and they are also much cheaper and easier to use... Most appliances are under 10amp (especially when Rogue is only 10amp), so Anderson plugs are overkill
Love videos like this for a sunday morning
Thanks mate!!
Im now going to put one of these 12vt systems in my old 75 series landcruiser thanks mate u helped me make my decision cheers mate
That’s awesome, thanks so much for the comments mate! Good luck with the installation
Great video guys,
The bracket on the drivers side under the bonnet with the bussman fuse holders, was that an off the shelf thing?
What point was used for the earth inside the troopy?
Thanks mate, really appreciate the comments!
The busbar was home made by Brando, not sure what he made it out of. I’ve ended up doing a similar thing in the 79, it’s in a recent video when we tidied up the engine bay. I got mine from springers.
The earth as far as I can remember was taken from the negative of the cranking battery and run straight to the negative busbar behind the rogue.
Hope this helps!
Richo
Hey what’s that table mounted on the outside of the vehicle?
It’s by a company called Mission 4x4. Thanks for watching mate!
@@MudModsBeers thank you for replying so fast. Awesome video, love the attention to detail with the wiring, labelling the wires, heat shrink over the conduit and going the extra step to add isolators to everything. Keep it up.
Hey quick question, how do you call the white plastic pieces that you used to spread the output of the rogue and as a connector? 19:14
Hey mate, these are screw terminal strips. Easy to get at Jaycar and the likes. Can come in many different sizes and amps. Here’s a link to one -
www.jaycar.com.au/10-amp-12-way-screw-terminal-strip/p/HM3196
Hope this helps!
Great Video Guys..!! What size Cable do you have on the mounting Board with the USBs ??? You mention 3mm Cable but the cable coming out of the USBs looks fairly thick !! like it is 5mm?? Cheers !!
Hey mate, thanks for the comments! Yes every cable is over engineered! For the USB’s it was a twin cable from memory, I’ll have to check but fairly sure it was 3mm, but run per socket, not daisy chained.
Cheers mate!
Deutsch connectors are much better, it why they are heavily used in automotive industry and they are also much cheaper and easier to use... Most appliances are under 10amp (especially when Rogue is only 10amp), so Anderson plugs are overkill
Thanks mate, must have a look at them
Breaking the active, are you an electrician?
There is a couple of Sparkies in the group!