The Odd Bunch: Giant towers to Baby ATs - Teardown and test!

Поділитися
Вставка
  • Опубліковано 11 лип 2024
  • If you'd like to support the channel and help me to produce more videos like this, you can find me on Patreon: / miketech
    Thank you so much!
    Decided to mix it up a bit. Let's check out some of the largest to smallest towers from the mid-90s to early 2000's!
    0:00 Intro
    0:15 System 1 Tour
    1:30 S1 Disassembly and inspection
    8:04 S1 Drive and PSU test
    9:09 S1 Testing
    11:08 S1 Button fixy and clean-up
    12:58 S1 Verdict
    13:20 System 2 Tour
    14:18 S2 Diassembly and inspection
    18:18 S2 Refresh
    20:41 S2 Drives
    23:30 S2 Testing
    26:46 S2 OS Exploration
    38:42 S2 Some clean-up
    39:47 S2 Verdict
    40:15 System 3 Tour
    41:16 S3 Disassembly and inspection
    45:39 S3 Refresh
    46:33 S3 Drives
    47:41 S3 Testing
    53:33 S3 Verdict
    53:53 Outro

КОМЕНТАРІ • 236

  • @n0b0dy76
    @n0b0dy76 5 місяців тому +102

    Mike is single handedly keeping the CR2032 battery industry afloat

  • @darenk.henderson1837
    @darenk.henderson1837 5 місяців тому +8

    Mike,To remove a face plate like the one on the Tiger Direct case, try using a socket wrench socket that is the same size as the tabs. It will compress the tabs allowing you to remove the face plate without breaking them

    • @miketech1024
      @miketech1024  5 місяців тому +3

      Good idea! I use that trick to remove the IBM PS/2 faceplates.

  • @jblyon2
    @jblyon2 5 місяців тому +43

    Those biceps pulling the case open are giving me the vapors!

    • @sjgrall
      @sjgrall 5 місяців тому +11

      Indeed. 🥵

    • @geoffhill5903
      @geoffhill5903 5 місяців тому +14

      glad I'm not the only one who swoons over MikeTech

    • @dlinkster
      @dlinkster 5 місяців тому +11

      Mike is, how these youngsters say, bae. Those biceps and that smile just melt my heart.

    • @GGoAwayy
      @GGoAwayy 5 місяців тому +12

      There's something about these comments that creeps me out. And I am a gay man, so its not the gay thing. Its the whole anonymous strangers on the internet ogling over someone's body in elaborately subtle ways that gets me. I can't tell what it is that separates us... I wonder if its age factor, netiquette experience, dating life situation/desperation, or what. But I wouldn't keep on doing what you all are doing. Kudos to this guy for not being put off by it to the point he stops putting out videos altogether. But it feels like you all will keep pushing until he gets to that edge of unease.

    • @HamburgerAmy
      @HamburgerAmy 5 місяців тому +1

      @@GGoAwayy a okay when it happens to a woman though?

  • @billkornth
    @billkornth 5 місяців тому +24

    I used to buy TigerDirect's bare-bones systems for clients back in the day. They were actually built fairly well. Thanks for the flashback!

  • @wongles
    @wongles 5 місяців тому +7

    I love coming to the comments to count the thirst posts. You could have an entire harem, and put them to work resoldering caps

    • @mike_rofone
      @mike_rofone 5 місяців тому +1

      I normally lurk here but got a good laugh from your comment! 😂 Checking the thirst in the comments is the bonus content to every one of Mike's videos.

  • @pinhellifelipe
    @pinhellifelipe 5 місяців тому +6

    Mike, I can't explain how much peace your videos bring to me. I took a break from following the channel, and now that I've returned, I remembered how good your videos are and how cute you are. Please continue with the great work.

  • @dlinkster
    @dlinkster 5 місяців тому +5

    I don’t why I felt you saying “I don’t wanna” in my heart. I still love working on computers, but darn it, sometimes I just don’t feel like doing certain things.

  • @joeconti2396
    @joeconti2396 5 місяців тому +21

    You truly are the Steve1989 of vintage computing.

    • @MDBenson
      @MDBenson 5 місяців тому +13

      One day he's gonna dismantle a system and get it out onto a tray... nice!

    • @2dfx
      @2dfx 5 місяців тому +1

      nice

  • @BlackBagData
    @BlackBagData 5 місяців тому +5

    Your commentary cracks me up, especially Power Man lol 8:34

  • @ALXMARTIN
    @ALXMARTIN 5 місяців тому +11

    I’ll always say it, this guy is a dream boat

  • @themoonupstairs
    @themoonupstairs 5 місяців тому +8

    Fun watch, these things really bring me back...
    I love living vicariously through your videos, man, thanks for taking the time to share your adventures in old hardware.

    • @ShrineOfLife
      @ShrineOfLife 5 місяців тому +1

      I have the exact same feeling, that feels kind of nostalgic, satifsfing but also strange, where did all those years go and why is life going so freaking fast? cheers mate and thanks for sharing, I really enjoy this peaceful retro community I found out about lately! best regards from bavaria in germany

  • @ChrisFredriksson
    @ChrisFredriksson 5 місяців тому +11

    Just catching up on old videos, I really love your videos Mike! ❤ Your whole style, your calm presentation, I personally love when you repeat stuff from previous videos (DS clocks and how to fix them, PSU warnings, CMOS battery replacements) so for me, please continue with that. I just love your videos and you uploaded one while watching another, so awesome! ❤

  • @gordtvradio3465
    @gordtvradio3465 5 місяців тому +2

    The best part of these videos is the OS exploration. I’m so happy that WD drive came back to life.

    • @fridaycaliforniaa236
      @fridaycaliforniaa236 4 місяці тому +1

      Back when WD were something we could rely on. I used to swear by WD only. Now it's just dog juice, false advertising, paper bearings and R/W heads, worst consumer service available, etc. A bit like MSi nowadays. Such a shame, those brands used to be so good only 15~20 years ago. Now they are trash.

  • @kingklump
    @kingklump 5 місяців тому +3

    I can honestly say that I wish removable motherboard trays were a feature in modern PC cases. Especially with M.2 SSD's becoming the norm, there's no reason not to bring them back. It would making building so much easier.

    • @fridaycaliforniaa236
      @fridaycaliforniaa236 4 місяці тому +1

      They still are present in a few modern towers, but it's essentially the most expensive or premium ones, like some from Fractal Design or Be quiet!, that often cost more than 200 €/$... Such a shame, because a tray for the mobo is a must have imho. A true life changer.

  • @EthanLomas
    @EthanLomas 24 дні тому

    I cannot believe you are bringing back the inner nerd of the early 00s I was lol

  • @k9cj5
    @k9cj5 5 місяців тому +2

    Inwin q500. First computer case i ever bought. What a beast! I believe i picked it up because maximum pc recommended . Still got it!

  • @JackStavris
    @JackStavris 6 днів тому

    Gosh seeing the 123 Free Solitaire game brought back some memories of my grandfather, he played that all the time on his old PCs right up until he passed away in 2011. He actually used a 733 MHz P3 system with Windows 98 until 2006, at which point he got a bargain basement LGA775 Celeron D based system that ran XP so poorly that the P3 would have done a better job. I actually ran an 800 MHz P3 system as my own PC until 2009 with XP installed that did just fine lol.

  • @thinkpad4
    @thinkpad4 5 місяців тому +3

    That second system had a BETA Socket 7 ZIF.

  • @geoffreyreuther5260
    @geoffreyreuther5260 5 місяців тому +3

    *cracks knuckles*
    System 1 - yes, that is EXACTLY how we accessed the socket lever back in the day. same tool, too.
    System 2 - TD wasn't exactly a manufacturer or SI in the way you'd think of it. The systems were actually built by someone else and rebadged at the factory, much like TriGem actually built eMachines. I'm pretty sure that someone else was Systemax, who bought TD a couple years after this machine would have been built. Systemax also went on to buy out the remnants of both CompUSA and Computer City. "How good was OCR in 1996?" Well, when I was asked back in 1996, I had to try REAL hard not to laugh in the customer's face.
    System 3 - Holy yellowing, Batman!

    • @Neodestro
      @Neodestro 5 місяців тому

      i like the motherboard from system 2 for 3dfx system built.

  • @alc5440
    @alc5440 5 місяців тому +10

    I didn't realize TigerDirect built computers under their own brand. Our second computer when I was a kid was a Systemax, which I thought was TigerDirect's in house brand, but it turns out Systemax bought TigerDirect in 1996.

    • @dlinkster
      @dlinkster 5 місяців тому

      Yeah, Systemax used to own all sorts of brands and some of the computers they built back in the day were pretty sweet. Systemax just had very questionable business practices.

  • @AlphaMensae1
    @AlphaMensae1 5 місяців тому +1

    Lesson learned: Need big strong arms so you can wrangle oversized PC cases like Mike does
    Having both AT and ATX power connectors is a sure telltale of an early PCI v1 board, which ran on 5v timing, and not 3.3v like v2

  • @BeamerMT1979
    @BeamerMT1979 5 місяців тому +3

    Thanks to you and a couple other UA-camrs doing retro stuff, I got 2 HP Elitebooks new old stock to goof off with. The memories of playing with XP, Vista, and 7!

  • @sjgrall
    @sjgrall 5 місяців тому +4

    Another Saturday, another video to entertain us! 😃

  • @supag5628
    @supag5628 5 місяців тому +2

    Love the 5.25 disk on your pegboard :) Need some HDD platters too!!

  • @NicolasTheGuy
    @NicolasTheGuy 5 місяців тому +4

    I just love your videos! I started saving these systems mainly because of you!

  • @MDBenson
    @MDBenson 5 місяців тому +4

    That SCSI card, from a little googling, looks like it was originally supplied as a companion card top a Mustek SCSI scanner.

  • @dlinkster
    @dlinkster 5 місяців тому +1

    Wow! June 16, 1997 - the BIOS date on that last system - I had been in college for a full week by that point. Man, those were the days. 😊

  • @taajwarkhan723
    @taajwarkhan723 5 місяців тому +3

    Man, I haven't thought about TigerDirect in like 15 years, what blast from the past...
    Can we take a moment to reflect on the blessings of this gigantic InWin case: plenty of space to manipulate components, excellent motherboard tray, and providing Mike an opportunity to give us a gun show. Thank you InWin gods.

    • @miketech1024
      @miketech1024  5 місяців тому +2

      Nor have I. Last time I even thought of them was probably 2006 or so. LOL these giant towers do make it hard for me to stay out of the shot!

    • @rmcdudmk212
      @rmcdudmk212 5 місяців тому

      I got my first 64 bit CPU from tiger direct. AMD Athlon 64 with 2gb of ram. Remember only paying like 150 bucks for it shipped.

    • @mima85
      @mima85 2 місяці тому

      My home server lives into the same model of that InWin case, the only difference from the one in the video is that mine doesn't have the ventilation holes on the top. I rescued it from the junkyard more than 10 years ago and it's still in use, it's a very nice and well built case.

  • @cullmaster7361
    @cullmaster7361 5 місяців тому +2

    Another awesome video Mike 👍🏻 Brings back memories when I used to build my own systems in the 90’s to early 2000’s. 🤞🏻 That you reach your goal. Just think, no more out of hours on-call…. been there and got the T-Shirt 👕

  • @maxtornogood
    @maxtornogood 5 місяців тому +5

    It's like you went to Socket 7 heaven in this video. Maybe not so much that 2nd system though, it went to Rust City!

  • @dlinkster
    @dlinkster 5 місяців тому +1

    That TigerDirect system brought so many memories. I used to get the TigerDirect catalog and some of their systems were nicely configured. The Yamaha sound card would have been great for both DOS and Windows games. Loved your jokes about that poor CPU fan and loved that sticker on the power supply.

  • @PileOfEmptyTapes
    @PileOfEmptyTapes 5 місяців тому +1

    No wonder the CPU fan in system #3 still sounded great, it must have been on vacation regularly - note the "Bali Bearing" [sic]. 😉
    System #1 has a Tyan board, some good taste right there. (It might have been cobbled together for a young person at some point.) That Mitsumi 4X drive brought me right back, we used to have one just like that back in the day. Peak 1995/96. Not very good for ripping CDs, those were the very early days of DAE. A 4X/4X/24X burner would have been about average for 1999, I remember that we bought a Ricoh MP7040A of that spec in 1998. (It should still be among my old retro systems in my parents' basement.)
    System #2 clearly belonged to an aspiring hobby musician, presumably of working age (20s-30s most likely). I wonder what the guy is up to now?
    50:03 Also known as "carbon fiber towel" in the world of M539 Restorations. ;)

  • @JoBo-ug6tf
    @JoBo-ug6tf 5 місяців тому

    That seven segment display... And THREE DIGITS! Mercy! I vote to bring that back (with live speed updating, of course). The plastic motherboard standoffs and molex connectors? Those can stay dead!!

  • @taffeylewis
    @taffeylewis 5 місяців тому

    Seeing that Umax software brought back memories. I used to work for them in 96. OmniPage and Presto ( I think this was a basic publishing app, don't quote me though) were bundled with the consumer scanners. VistaScan was the driver. And OCR was pretty good back then too. Had to be a nice clear original though. I mainly supported the Pro stuff, but was pulled in to help the consumer side when thay were busy. Great video as always Mike. Keep up the good work :-) By the way, that SCSI card is what Umax used to ship with their scanners. Before they made USB and parallel port versions. I used to install an internal header to control SCSI CD-ROMs.

  • @parickseaside2832
    @parickseaside2832 5 місяців тому +6

    LOVE THIS CONTENT! KEEP UP THE AMAZING WORK!

    • @krod666ful
      @krod666ful 5 місяців тому +1

      Yes! Amazing 👏

  • @marktubeie07
    @marktubeie07 5 місяців тому +4

    Mike, I too am having a moment over that Creative Audigy sound card - it is still SOoooo impressive. Yes, I was ecstatic when I finally got one as well. It served me well for many years. As I recall the software that came with them was quite good as well.

    • @miketech1024
      @miketech1024  5 місяців тому +3

      After always having to use cheap and on-board sound cards for recording, I was… floored by the noise-floor on the Audigy card!

  • @ypoora1
    @ypoora1 5 місяців тому

    Man i love these old big towers, it's a shame you don't really see them around here any more.

  • @johnhudson7055
    @johnhudson7055 5 місяців тому +1

    I love that Inwin case. That first machine is awesome, I wouldn’t be surprised if that was a 14.4 modem.

  • @abundantt1
    @abundantt1 4 місяці тому

    It nice to see some of these machines, it makes me nostalgic

  • @branscombe_
    @branscombe_ 5 місяців тому

    39:40 love the care and attention you give to each system case.
    you're remarkable!

  • @esc2dos
    @esc2dos 5 місяців тому +1

    Enjoyed that, love those MMX 233 chips.

  • @michaelathens953
    @michaelathens953 5 місяців тому

    Ahh yeah I, too was obsessed with those SB Audigy cards. I still remember ordering my Audigy 2 right when they came out, I still have it in one of my parts drawers in fact.

  • @mattelder1971
    @mattelder1971 5 місяців тому

    The SCSI card in the third system looks like a typical OEM one that was intended just for a scanner. Those were pretty common in the early-mid 90s. That's why it doesn't have an internal header.

  • @MJL64
    @MJL64 5 місяців тому

    I had a cd shatter to pieces in my drive. I'll never forget that terrible sound thinking I destroyed the whole drive. I was eventually able to get every tiny bit of it out and had no problems for many years after, but every time time I used it had flashbacks of it happening again.

  • @Boris_Amiga1200
    @Boris_Amiga1200 5 місяців тому

    Great video!

  • @blackheart58
    @blackheart58 5 місяців тому +1

    I remember seeing Tiger systems in the electronics department of stores we shopped in. I like the look of the case, minus the rust. Looks to me like the system was either picked out of the trash or caught in a flood. I like the Titanic joke 😆.
    I do miss all the sounds of older systems. It gave them character. I like listening to all the boot up sounds. Your videos play into my sense of nostalgia. 🙂

  • @rob12317
    @rob12317 5 місяців тому

    love the vids man!

  • @richjamjam
    @richjamjam 5 місяців тому +2

    Yay another episode! Let's tear into these! ❤

  • @fridaycaliforniaa236
    @fridaycaliforniaa236 4 місяці тому +1

    That Western Digital coming back from the dead is something we don't see often, even more nowadays. Back then, WD drives were something we could rely on. I used to swear by WD only. Now it's just dog juice, false advertising, paper bearings and R/W heads, worst consumer service available, etc. (remember the WD Caviar Green 1GB HDDs disaster ? Back in the day I almost lost my job and thousands of € because of them). A bit like MSi nowadays. Such a shame, those brands used to be so good only 15~20 years ago. Now they are trash.
    BTW, thanks for the time you put in your videos, mate ! I'm reaching 40 yo this year, I've made my first steps in computers with a 166 MMX and I have huge waves of nostalgia when I watch each one of your videos =)

  • @arnlol
    @arnlol 5 місяців тому

    Your videos are always so good! Interesting how those different looking systems all ended up being socket 7 and also everything worked aside from that one stick of RAM! Also that 7 segment display with 3 full digits, that must be really uncommon, I think most just had a 1 for the 3rd digit if it even had 3 digits at all, so that’s a nice find!
    The WD drives from that era often seem to like having tantrums like that one, but I’m glad it recovered as the stuff on it was quite interesting! I wish the hard drives weren’t so often gone from the systems though I understand why that’s the case.

  • @jayhollowayii2
    @jayhollowayii2 5 місяців тому

    Mike welcome back Yey

  • @lorenzorentniop717
    @lorenzorentniop717 5 місяців тому +1

    Nice!

  • @aaldrich1982
    @aaldrich1982 5 місяців тому

    your videos are really great and one of the favourite parts of the weekend for me. it's equal parts my love of beige computers and your presenting/in depth knowledge and willingness to invest your time and love into computers that somebody else once loved.

  • @jonakers704
    @jonakers704 5 місяців тому

    That long floppy cable looked like it was one of the cables that came with a floppy connected tape drive like a QIC style. It has four sets of connectors.

  • @artoniinisto9022
    @artoniinisto9022 5 місяців тому +1

    That Canvas X drawing system from Deneba in Miami started in 1987 for Apple Macs. I never used it or Macs, only later IBM OS/2 Warp, Windows 95 and some early Linux distros to start with. But it was for academic use and pros, unlike CorelDRAW or Adobe Illustrator that were for home users, too. 35 years or so later, (it was bought by a Canadian company and became a Windows-only thing plus the Mac version with a different name), it's still available for some really big companies and such, I think. This history trip is quite cool.

  • @demenACE
    @demenACE 5 місяців тому

    I can't wait to see the PCs you dig up!

  • @Le_Grand_Rigatoni
    @Le_Grand_Rigatoni 5 місяців тому +1

    43:40 SL27S isn't the stepping, it's the part number. Stepping is the core revision (for exemple this chip uses a B1 stepping core).

  • @DuneRunnerEnterprises
    @DuneRunnerEnterprises 5 місяців тому

    Mike,you just the well, that's keep on giving!!
    "Warranty, that voids itself"😂😂😂😂.

  • @eugeniuszgorka8599
    @eugeniuszgorka8599 5 місяців тому +1

    Interesting sights, Mike. I always watch your videos with curiosity and I always learn something new. Best regards and see you next time. Ciekawe zabytki , Mike . Zawsze z ciekawością oglądam Twoje filmy i zawsze dowiaduję się czegoś nowego . Pozdrawiam i do następnego .🤩🤗🤔

  • @freednighthawk
    @freednighthawk 5 місяців тому

    Tyan computing, that's high end server stuff from back in the day. I used to lust after their 8x Opteron mother/daughterboard sets.

  • @RocketToTheMoose
    @RocketToTheMoose 5 місяців тому

    My original ABIT/Celeron 300A build back in the day had a very similar case. It wasn't as tall, and didn't have those feet, but it did have the slide out MB tray, and that vertical triangular trench on the face with the LED's and reset button in it. Wish I still had it now.

    • @RocketToTheMoose
      @RocketToTheMoose 5 місяців тому

      I should add I meant the first system featured here. After doing a bit of research, I'm pretty sure mine was an InWin A500.

  • @idahofur
    @idahofur 5 місяців тому

    Those full size at / atx cases like that mostly always needs a helping tool to open up. Very nice case. Nice finds to. Also love those Tyan boards. Sold different models back when they was new. Don't think I did that particular model though.

  • @MorganTN
    @MorganTN 5 місяців тому

    Tiger Direct was the Newegg/Amazon of computer parts of its day. The first system I built was a Tiger kit with a similar case everything came in boxes and I had to put it together myself. Later on they sold prebuilt systems in place of the kits.

  • @al3x_10m
    @al3x_10m 5 місяців тому +1

    powerman indeed :3 (also that shirt makes you cuter

  • @2dfx
    @2dfx 5 місяців тому +3

    I built a few systems with the Q500 in the early 2000's. Back then for being what was a "budget" case it was extremely practical. Antec & Lian-Li were the "premium" choices then. It even came with a power supply! That Power Man PSU you pulled was a throw in when you bought the case. It's actually a very good quality power supply - it's made by FSP group.
    My two most memorable systems I built with that case was a Pentium Pro server, and my own personal AthlonXP rig!

    • @miketech1024
      @miketech1024  5 місяців тому

      The PowerMan was indeed quite respectable in build quality!

    • @RetroTinkerer
      @RetroTinkerer 5 місяців тому +1

      I always had regrets of getting my Antec KS188, you had to slide the side panels all the way to the back in order to remove them, when I looked at pictures of the IWIN 500 I thought I should modify mine copying that design.
      It was such a strange combination of parts, looks like someone took an old socket 5 motherboard from an existing system, purchased that IDT Winchip CPU upgrade (awesome find BTW) and parts from all over the place and installed it into that case.
      BTW Mike don't know if you have research it but it's not common to find socket 5/7 ATX motherboards, apparently they command pretty steep prices for people interested into building inverse sleeper 😂

    • @SenileOtaku
      @SenileOtaku 5 місяців тому +2

      Ah, I miss my Q500. Should have tried salvaging it after our house fire.

  • @EwicoCylinder
    @EwicoCylinder 3 дні тому

    In my opinion the best rust remover i know so far is "Evapo Rust" and plus it's skin-friendly so no gloves are needed to protect your skin.

  • @tsimeone
    @tsimeone 5 місяців тому

    That first case reminded me of my schools old servers from back in the day.. 😊

  • @rmcdudmk212
    @rmcdudmk212 5 місяців тому +1

    These are some cool old machines. Been a while since ive seen anything with TigerDirect labling.

  • @Luke-rr9po
    @Luke-rr9po 5 місяців тому

    Thanks Mike, another AWESOME vid, i've got a soft spot for Socket 7 systems myself, the first PC i ever built was a Pentium 200 MMX using the exact same case as the last one you showed here only mine was the mini tower version and yyyyep I still have it!! 👌👌

  • @robichag
    @robichag 5 місяців тому +3

    Great video! 🎉

  • @westtell4
    @westtell4 5 місяців тому

    yay ur back

  • @johnhudson7055
    @johnhudson7055 5 місяців тому

    On that second machine the best way to remove a face with those clips is to get a thin screwdriver and it into the middle of the metal thingy.
    Back in 96 my best friend and I built up a very powerful, 200MHz 😂, computer we both used and it had a 2GB WD that dropped a platter but it still worked until it needed data on that platter. We used it for about a week of so to see if it would ever die, we got tired of waiting and put the replacement in and dissected it.

    • @miketech1024
      @miketech1024  5 місяців тому

      Good idea on the clip removal! That is a really interesting hard drive failure mode. I would have fun with that!

  • @mattelder1971
    @mattelder1971 5 місяців тому

    That Tiger case was made a minimum of a year before the system was assembled. The AMD K6 wasn't even launched until April of 1997.

  • @EthanLomas
    @EthanLomas 24 дні тому

    I agree with you about the soundcard lol

  • @SidneyCritic
    @SidneyCritic 5 місяців тому

    I fold office paper over a credit card, IPA it, and plug it in and out of sockets, and when the pins stop making black marks on the white paper, it's clean - lol -.

  • @keithbrown7685
    @keithbrown7685 5 місяців тому

    Ya know, Mike, in that first computer, I really was hoping there'd be SIMMs in that thing. I take a dimm view of what was actually installed.

  • @clothesontheground
    @clothesontheground 5 місяців тому

    enjoying you tear into the big guy

    • @clothesontheground
      @clothesontheground 5 місяців тому

      ua-cam.com/video/e9m2KX_14_0/v-deo.htmlsi=--F1PoMhXxzlnC2U&t=112

  • @infi84
    @infi84 5 місяців тому

    PowerMan was In-Win's inhouse PSU brand for PSUs that shipped with their cases and they were usually made by FSP, they're quality PSUs

  • @nononymous
    @nononymous 3 місяці тому

    the 2nd system looks like it was heavily used on the internet back them. might be worth a shot to see if it has any Windows update that hasn’t been preserved yet (Windows Update Restored is a project that aim to preserve those, if you wanna check them out ^^)

  • @Butterscott_NJ
    @Butterscott_NJ 5 місяців тому +1

    PowerMan? Sounds hot.

  • @AJComputerServicesUK
    @AJComputerServicesUK 2 місяці тому

    Hi Mike, Your comments and observations after: 47:40 were so comical! 😂 at: 50:55 you mention that you wouldn’t want a disk to explode but you’ve heard stories of it happening to others, I have a Shuttle PC which is similar to the one in one of your other Videos and I inserted a genuine Microsoft XP Disk and the drive started making a horrendous noise and then the Disk shattered, It didn’t half make me & my Female friend jump at the time, First & only time it’s ever happened to me and wouldn’t want it happening again! I can’t believe all 3 of those Systems had no Thermal Paste on the CPUs, Think I’ve actually had one of those “Power Man” PSU’s and my first ever CD-Writer was a HP but a little bit different to the one in System 3, You also mention retro-bright for System 3, I did it with a few of my Cases back in 2020 during Lockdown & was happy with the results, I used Cara White which I bought here in the UK from eBay, Apparently it’s also used for Caravans & Motorhomes (Trailers or RV’s in the US & Canada) 🇬🇧

  • @johnhudson7055
    @johnhudson7055 5 місяців тому

    I loved those trident cards back when I ran a computer store cus windows always had drivers and I never had to hunt for them. Late 90s, early 2000s if you didn’t have the driver disk there was a good chance you weren’t gonna find it online.

    • @miketech1024
      @miketech1024  5 місяців тому +1

      Ohh, I remember the horrors of not finding what I needed on driverguide.com in those days. Thrown to the wolves!

  • @leecremeans5446
    @leecremeans5446 5 місяців тому +1

    Power Man was In Win's brand name for power supplies, and at least this one seems to have been built for them by FSP Group/Sparkle Power, which was a decent brand back in the day.

    • @miketech1024
      @miketech1024  5 місяців тому +1

      It does feel decently constructed!

  • @mesicek7
    @mesicek7 5 місяців тому

    Loving these retro teardowns.
    edit: Have you checked the browser histories of these old pc's?

  • @dezhocob
    @dezhocob 4 місяці тому

    You mentioned at the end about wanting hard drives in every system. I have like 50 old hard drives most of them below 10 GB in capacity. If you want, I could mail them to you.

  • @Holycurative9610
    @Holycurative9610 5 місяців тому

    I've always found furniture polish really good for sticky switches..

  • @brandonupchurch7628
    @brandonupchurch7628 4 місяці тому

    In my experience most drives except really really old drives(proprietary interface to maybe 8x IDE) read CD-Rs well although it helps if you burn your CD-Rs at a lower speed usually, The problem I've had is the DVD optics on drives just dying, like they'll read CD-Rs and CD-RWs fine but any type of DVD is a no go, I've got a few DVD drives where their ability to read RWs has gotten margnial, they'll read +/-R and -ROM fine but really struggle with RWs, and cleaning lasers on optical drives and cleaning and regreasing slides only helps on rare occasion.

  • @johnhudson7055
    @johnhudson7055 5 місяців тому

    The third machine probably used the SCSI card for a scanner or maybe a Jazz or tape backup.

  • @DoomTay
    @DoomTay 5 місяців тому

    Wayback Machine might be able to help with at least some of the dead URLs

  • @plainsabertooth7828
    @plainsabertooth7828 5 місяців тому

    You can also use vinegar but you will have to give it a few days.

  • @UnixGoldBoy
    @UnixGoldBoy 5 місяців тому

    I remember using Canvas very briefly back in the day

  • @hattree
    @hattree 5 місяців тому

    Tiger/TigerDirect always had huge ads in PC magazines back then. Then they went into catalogs. They were known for selling lesser equipment.

  • @simonlathwell
    @simonlathwell 5 місяців тому

    Talking about CD drives breaking disks, I've had a couple of times where both CD and DVD drives have gone rogue and spun up so fast that disks have shattered into hundreds of pieces. Needless to say those drives quickly went in the bin as I don't like optical drives spinning faster than the speed of light.

  • @dimka4996
    @dimka4996 5 місяців тому

    “I don’t know if this has any kind of browsing” when history drugstores, automotive advice, pharmacy 😄

  • @kenchristenson7548
    @kenchristenson7548 5 місяців тому +1

    System two Tiger Direct Bare bones. i used to see the advertisement in all the PC magazines.

  • @chad2787
    @chad2787 5 місяців тому

    The K6 is a pc-chips board. I built thousands of systems like this. These were cheap, low-cost... Maybe about $450 new.

  • @Leahi84
    @Leahi84 5 місяців тому

    Ah.. Tiger Direct. I used to get their catalogs in the mail all the time back in the early to mid 2000s. Would love looking through them.

  • @erie910
    @erie910 5 місяців тому

    For such a large case, its surprising that there's one 3.5" hard drive slot.

  • @Butterscott_NJ
    @Butterscott_NJ 5 місяців тому

    AMD and VIA was the early 2000's equivalent of AMD and ASRock in the late 2000's. Everyone else was rocking a Core 2 Duo (or Core 2 Extreme if they were big spenders) when I was stuck with an Athlon x2.

  • @erinwiebe7026
    @erinwiebe7026 5 місяців тому +2

    I had the mid-tower version of your Inwin case. I paid too much for it (new), but I remember it being a nice case.