Trainz Tutorial: Basic ATLS Crossing Setup
Вставка
- Опубліковано 4 жов 2024
- This highly requested tutorial covers the basics of setting up an ATLS Grade Crossing system.
ATLS is a flexible system that allows you to customize your grade crossings, making them as simple or complex as needed. In its most basic form, initial set up is easier then expected.
For more info: www.boatztrainz...
----
Follow me on Snapchat for special previews on future episodes and other fun stuff.
Snapchat: Approach_Medium
If that's not enough and you want more content, make sure to follow my Twitter and Instagram where I frequently post photos from various railfan trips.
Twitter: / approach_medium
Instagram: approach_medium
----
Get Trainz: store.trainzpor...
----
Support my channel by making a donation ;-)
www.paypal.com...
I use the 4 trigger system for crossings, because if you do two and you put one really far away, the crossing will stay active until the lest car of the train hits that trigger. The 4 trigger system allows you to put two triggers on either side of the crossing, with the purpose of turning the crossing off, and two on either side that are far apart, for turning it on. Its useful for running trains in two directions.
I did a horrible job describing that sorry
I've heard of this but haven't tried it out for myself. I'll have to give it a look and maybe do a follow up tutorial.
okay!
theres a youtube video on it.
yes! 4 trigger system is much better!! Pretty easy to do too.
Your video was really helpful but I couldn’t figure out how to download those crossing signals from jointed rails
Glad to see a video explaining this. I had to learn through trial and error. It would be nice to see the 4 trigger set up as well. Good job though.
Yeah, the more comments I read the more I think a follow up video utilizing the 4 trigger technique might be in order.
Awesome, I always enjoy learning how to use this stuff. You explain it very well and make it simple. Thanks
New to trainz, especially the surveyor module. This is a little confusing, but I am a retired electrician of 41yrs, so maybe I can figure it out! Really enjoyed your presentation. Need all the help I can get. Just started my route. From watching a couple of your videos, I would say you have been at it a while! Although incomplete as you stated, I thought they were quite nice! Once again, thanks for the info!
You're very welcome. Best luck building your route! Let me know if you have any questions and I'll do my best to answer them. I have ideas of other tutorial videos, I just haven't had the time to film them.
Subbed. Was so confused when I downloaded tidewater point 2019 and looked at the crossing components. Great tutorial!
Thank you for this I finally managed to learn how to get these crossings to work :D
Where did you get all the stuff to make it work? As I downloaded from the TRC site and my CM is saying missing/faulty dependencies
@@thetrainmaster1 from memory some of them were already built in. I got some from the download station too
Approach Medium, thanks for doing this bud, I was struggling with trying to build one, but now I know.
You got it buddy ;-)
Approach Medium, thanks!🛤
Nice video! Keep it up!
That was awesome. I've got a lot to learn.
There are a lot of little tricks like this that can make worlds of difference in realism within this simulator. Hoping to share as much as I can.
I have seen lots of tutorials but I screwed up the ATLS system with a 4 track. But glad to see you uploaded!
:-) There's more in store
:D
this technology is REVOLUTIONARY
Clear, concise and very well explained man. Thanks!!
Never mind i got it working. Great video. Thank you so much
There's a different traffic stopper on the DLS. It looks like a white box with red stripes on it. I reccomend that one because it doesn't put your road under the ground d
Keep making these tutorial! Very Helpful
+Daniel Stanuszek Thanks! Glad to help
thanx bro it helped me a lot lot lot .......... more than any other tutorial
+Raivat Trambadia Excellent! Glad to hear :-)
with this you can have unstoppable type stuff happen with the gate time
At The Crossing Productions 😂😂👍
Really good tutorial Joem thanks! I will use it on my route project. See you soon!
+Carlos Charly :-)
Awesome tutorial, helped me a lot!
This was so helpful! Thank you so much! My mistake was that the numbers were not the same.
Nice video, I use the 4 trigger system myself so traffic returns to normal easier.
A few others have mentioned that as well. I've never tried that set up myself so maybe I'll mess around and do a follow up video.
That would be good, I live in Australia and our interstate lines usually have the crossing go back up as soon as the last wagon clears the crossing to ease traffic congestion (our trains are 1500 - 1800 metres long)
I managed to set up a simple crossing a couple of years ago with this but now I have to do a six track crossing. I don't need road traffic.
Wow great video loved it I enjoyed the cinematic you should do a video on how to do cinematic that move without the i game cameras as I know there's a way to do it and I've seen you do it if you did it would help my channel a lot and my new series
This was very helpful, thanks!
Excellent video, thank you.
;-)
Nice tutorial, bro 👍🙂 this is what I need, thank you. Subscribed!
Roy Repie Bot?!?!!?!?!?!?!?!?!?!?!?!?!
Thanks AM
Thank you for doing this!
:-)
I can’t find the atls crossings.
I hope you make more of these. its hard to find a proper tutorial video for trains sim
+michael bobb Yup, I've got a list going. Let me know if there's anything in particular you're looking for
Thank you so much this was a great help
Btw i can use the rr crossings
Thanks for the tutorial, i followed every step you did and it works and i am really ☺ about it
So again, thanks for the tutorial, it really helps me 👍
+Michael Eaton Glad to hear! :-)
Approach Medium yea, i was so happy that i can use it
awesome video
+Terry Bolden Jr. :-)
When I try to increase the height of the road after attaching the traffic stopper, the road will change height by full numbers and not decimals. This is leaving the road above the crossing.
hold the control key when you do it
Gr8 Tut keep them coming
+Iron Farmer :-)
I did it. Thank you. But what would happen if I put 3 tracks ????
I always put a whistle post near where my triggers are
Very nice video! Could you please do a signaling tutorial? I can't find a high quality video about signals anywhere...
Yup, it's on my todo list. I just haven't had the time yet to film it. Sometime soon though.
good job
:-)
which do you perfer? Atls or RTC? I am getting used to RTC now and enjoy it though I do see a buggy issue with it as it tensds to open and let cars thru when the train is not all the way thru
Thank you
+John Riso :-)
OMG thanks soooooo much!
You're probably not going to respond to this comment but oh well.
I'm dealing with an issue, I have a crossing and its angled to the track, what i mean by that is that the intersection with the road and the track isn't a perfect cross. The road is diagonal so when I place the traffic stopper, the cars drive up too close to the track.
There are traffic stoppers with larger stopping spans you can use. If you have my DBEV route you can look and see how I used them there.
i found somthing in the driver mode where if you hover your mouse over the stopper it will say ctrl right click you that then it says invisible train 1
When I attach the road to the ATLS traffic stopper the road keeps going over the tracks instead like yours when you connect the road to the traffic stopper it actually goes with the track like what I did what you did the road with the traffic stopper connected together and it keeps going on top of the track and its at height you put it on
THXXXXXXXXXXXXX SO MUCH!!!!
Now how about ones where the Crossings are setup next to an intersection? :P
I'm kidding about that, but nice tutorial! Didn't realize it could JUST be 1 ATLS slave setup altogether... But hey, usually I sometimes have 2 for a delay for the other crossings to go down, or delay the cars crossing after the gates are going up.
Yes, they will.
Yeah the system is pretty flexible like that and there's a ton more you can do with it. I'll probably be doing a few more tutorials in varying degrees of difficulty.
PLASE A NEED HELP HOW DO YOU CAN CONNET ROAD WİTH ATLS TRAFFİC STOPPER A PLAY TRAİNZ SİMULATOR ANDROİD İ WANT CONNET ROAD WİTH ATLS TRAFFİC STOPPER BUT CAN'T DO YOU CAN HELP ME?
Can you make a tutorial on how to setup the Jointed Rail Signals
+Southern Productions Yeah, a signaling video is in my list, I'm just not sure how to go about it since signals are different from railroad to railroad
I need this just incase i need to do ATLS
How did you get the blue grid?
my jr crossings arent flashing. there is no lights on any of them at all. can you give me assistance?
What if I'm using only grade crossings w/o gates and I have car traffic disabled on my road? Can I omit the traffic stopper from the installation?
Just saw the post on Instagram about this haha
some of them are not even in the download station. it says there built in but they don't show up at all can someone help?
Can you make cars stop at a passive (no signals) crossing in Trainz?
Question
Is there a way to fix the TRC weathered grade crossings on the DB&EV interchange area? or is this video the way to fix it
I couldn't download the crossing into trainz a new ira and the name was red of the object. What do I do?
I also use ATLS but I do use TRC some but not as much as atls
Quick question how do you fix the modder faulty cuz I have the same crossing and some of them were molded faulty
Hi, do you have the name or kuid of this road? It looks very nice
It's the AASHTO road system available on the DLS
@@ApproachMedium How did you get traffic to appear on those roads?
if theres more than 1 track do we have to put two slaves?
Where's today's TMR? I saw on twitter you were making one today and you had ACe's.
+Railfan Center I decided to hold it until Friday to give me a chance to catch up. Should give me the chance to get back on schedule or at least closer to it.
Hi i have a question. Can you provide files with ATLS trafic stopwatch, any of crossing for ATLS and ATLS Trigger controllers and ATLS slave?
I search these files for trainz: a new area and I can not find them! You can help?
www.boatztrainz.co.uk/atls.html
THANKS
One question how can i download it?
Hey i need a bit of help. So i cant add content stuff to content manager because everytime i click it. It will get me out of the game so i used the Grade Xing RR Crossing and i was wondering does it still work on the Grade Xing?
Is it possible to change the bell mesh on the signals to sound and look right? I notice they stand out when I move the signals... along with the crossbuck. So I think it’s saying “hidden feature”... maybe even what they sound like too?
Great explanation! I guess the main advantage of the ATLS crossing vs the automatic crossings (the built in ones that don't require any setup) is that they look better and have better detail..I'll probably start updating my crossings to the JR crossbucks. It's just like the signals..first I just used the basic ones, now I've been updating to the JR searchlight ones. Thanks for all the videos..I've gotten some great ideas and inspiration from your channel..check some of my videos sometime if you get the chance
Exactly! The advantage of using ATLS crossings are higher detailed crossbucks as well as greater flexibility regarding when the signals are triggered. You can have the engine creep right up to the crossing before it's triggered or have it go off well in advanced. Glad my videos have been an inspiration for you :-)
@@ApproachMedium i cant get the traffic stopper to be lever with the road, whenever i try to adjust the height of it it moves by huge chunks how did you make it move smoothly and not by chunks?
Can a desired bell ringing pattern be set at an atls crossing for instance the bell rings throughout until the gates go up?
I can’t raise my road without it going to high, help please?
Have you tried clicking on the spline point, checking the height and then inputting the height you want manually ?
Great Tutorial
I have installed 5 crossings pretty much identical to yours, everything works except the traffic stoppers I cant figure out why. Any clues.
regards
Dashuh
Make sure the traffic stopper is actually connected to the road spline
How do I download the Traffic Stopper? My version didn't come with a traffic stopper when I bought it...
my pack did not come with a trigger so where do i get it?
What track and road were you using I want to try and get the road from the download station
My bells arent working on the crossing help plz..
Yeah I can't find the traffic stopper in my game of Trainz New Ara mind helping me?
ShadowFreddy003 Productions you might have to look in the download station
i cant get the crossings to go back up after
How do I do it for two tracks for both ways?
Don't know what I'm doing wrong, the signals and gates work fine, but I can't get the traffic stopper to stop traffic!
Make sure the traffic stopper is connected to the road and also connected to the signals with invisible track.
How do you get atls I have the crossings
I couldn't place the ATLS crossings even though they were there.
What was the name of the song that you used for the intro?
Lol you should see of my ATLS crossings specially my street running one
+Boeingfan727 lol Next livestream ;-)
I don't see the stopper in mine for some reason
Hey AM, should the speed of the train, affect the distance of the triggers to the actual grade crossing? Your demo was great, but that engine, was basically crawling through the crossing intersection ! Thanks, Mark
Yes it does. Depending on your speed limit you have setup on your route, and the area you plan on setting up the crossings at, I would put it out a little further away. Usually for me, I have it farther out at a specific point (after a lot of tests and placing markers) on my main routes. As for my spur lines with speeds around 20mph, I usually place it closer.
Hope this helps!
Exactly what Fury said. I'm not sure if there's a particular formula for figuring it out other then trial and error but basically the faster the speedlimit the further away you'll want your triggers. Just like in real life, you'll want ample time for the traffic to stop and the gates to go down before the train arrives.
where do you download it hm
is it bad that i find you calling ATLS "atlas"? dont take it too harshly, its just a sidebar annoyance from the rest of the video. the whole video was to teach people how to set up an ATLS crossing which is pretty succesful.
When will the next P&B be?
I'm aiming for Friday the 19th. Hopefully I can get it done by then.
Tutorial for download
When is the next P&B coming out?
Aiming for Friday. Wanted on this past Friday but I got sick in the middle of the week.
ok!
I downloaded it but how do I get it into Trainz New Ara
I tried this in trainz 2010 and it did not work, any explanations for that, just wondering
I'm not sure if it's made to work with TS10.
Question can multiple car's go by and it still stay's down because it look's like it's only doing the locomotive.
The gates stay down until the rear of the train passes the second trigger
ok
hola, primero buen tutorial.
quisiera si me puedes ayudar como configurar la altura del objeto , para que no suba de metro en metro, hablo de cualquier objeto como los atls crossing.....
You can try holding control or shift to change the amount in smaller increments.
my cars are not stopping at the crossings
What's the song called that plays at the beginning
What's the track and road you use?
+Railfan Center Track is from JR and the road is AASHTO from the DLS
YAY!!!!!!!!! 1st
+Trevor Trainz :-)
This is the one channel where I am legitimately sad if I don't watch each video within the first hour of it coming out. I barely made it this time. Curse you Intro to Comparative Literature!
I have T:ANE SP4 and it doesnt show me the ATLS Traffic Stopper. Is there a way i can download it or something. i'm just trying to make a railroad crossing for my city
Should all be on the download station
@@ApproachMedium is that the one in game? and if so witch section Example: Rails, Splines, Objects. etc.
@@ApproachMedium Also I have TRC crossings with traffic stoppers but most of the crossings and all the traffic stoppers text is red and i cant use them, same goes with most of the locos i download like the Bigboy or FEF-3s
How did you get the Jointed Rail crossings to work? I've downloaded them and tried to get them to work in T:ANE but they keep saying that they're missing dependencies
I think there's a dependency pack on JR's site
Oh ok I'll see if that works. Thanks!