How to change Scantronic 9651 alarm battery
Вставка
- Опубліковано 31 січ 2021
- Still need help with your Scantronic alarm battery? BUY REPLACEMENT BATTERY here smartsecurity.store/products/... or BOOK AN ENGINEER here www.smartsecurity.support
If you have a 'battery missing' or 'battery fault' message on your Scantronic alarm or if your alarm is beeping, then you need to change your alarm battery.
To change the battery in your EATON Scantronic 9651 / 9751 alarm, you first need to remove the cover of your main alarm panel by unscrewing the two screw on the the front of the panel. The alarm will then sound. To silence the alarm enter your 4 digit user code.
Replace the old Scantronic battery with a new battery and replace lid. At this point you may discover you need an engineer reset code.
Call our team for an engineer visit to reset your alarm via www.smartsecurity.support or email help@smartsecurity.support - Навчання та стиль
The availability of the engineer code should be sought BEFORE the cover is removed!
You should be isolating the mains supply BEFORE removing the panel cover to change the battery. Failure to do so could result in electrocution!
No it depends if you don’t touch the transformer but it can be dangerously if kids watch this tho ether way if you have the earth in and you accidentally shocked your self you’ll be fine you just need an earth in Earth’s always protects you and the panel to fry
@@uksds3806 seen yourself m8 your like 13
What's the engineer code?
The default is 7890, though depending on your installer they might've changed it
very unprofessional wiring and you should take the fuse out of the spur before removing the battery or any other work