BOBCAT TOOLCAT WITH PREDATOR CHAINS

Welcome to Outlaw Woodworking
Outlaw Store outlawwoodwork...
All Tools and Materials we use in the Outlaw Shop are listed in the description below, Thanks for watching ,Please subscribe,ring the bell and like the video. Welcome to Outlaw Woodworking
All Tools and Materials we use in the Outlaw Shop are listed in the description below, Thanks for watching
TOOLS USED IN THE OUTLAW SHOP
1-HITACHI 10 '' MITER SAW amzn.to/3l7jHo8
2-RIGID ORBITAL SANDER amzn.to/38rEDCP
3-DEWALT DWEE7485 TABLE SAW amzn.to/2JFRqag
4-TX504 TORCH amzn.to/2TVVo0f
5-BERNSOMATIC TORCH FUEL amzn.to/32dTD2U
6-MILWALKEE HOLE HAWG amzn.to/2TYua9q
7-MILWALKEE 18V CORDLESS DRILL amzn.to/2JBoW1f
8-MILWAUKEE IMPACT GUN amzn.to/38bIT9e
9-MILWAUKEE CORDLESS SAWSALL amzn.to/32iFa5Q
10-DEWALT CLAMPS amzn.to/3exWBnV
11-BESSY CLAMP amzn.to/3l4Pi9N
12-BESSY STRAP CLAMP amzn.to/32hLlHw
13-DEWALT ROUTER amzn.to/3mTosC3
14-PORTER CABLE SMALL ROUTER amzn.to/3l0CaCt
15-PORTER CABLE LARGE ROUTER amzn.to/2TXD32Y
16-PORTER CABLE DOVETAIL JIG amzn.to/2GvaSFo
17-JESSEM ROUTER LIFT amzn.to/36bbnx4
18-DEWALT DW 735X PLANER amzn.to/32ippfh
19-OUTLAW KNIFE amzn.to/2I80Om2
20- DEWALT SAFETY GLASSES amzn.to/38cFd71
21- Husqvarna 18 Inch 445e II Gas Chainsaw amzn.to/3kpQSC1
22 -HUSQVARNA HELMET amzn.to/2GICtD4
23- DR SCHOLLS GEL FEET INSERTS amzn.to/38xs5JU
24- MILWAUKEE SOCKET SET amzn.to/3jYT6bi
25-IRWIN QUIK CLAMPS amzn.to/3l7z5AF
26-PONY PIPE CLAMPS 3/4'' amzn.to/3n0nQe0
27- KREG POCKET HOLE JIG amzn.to/2JIFHrv
28-MILWAUKEE VACUUM amzn.to/3kquXL4
29-HUSQVARNA 18’’ CHAINSAW BLADE amzn.to/35lcWJM
30-HUSQVARNA X GUARD BAR OIL amzn.to/2UndNDA
31-STIHL 2 IN 1 EASY FILE CHAINSAW SHARPENER amzn.to/3niPYJh
32-CHAINSAW SHARPENING KIT amzn.to/2K427DN
33-CHAINSAW FILES 3/16 amzn.to/2K9Bxcg
34-LOG OX 3 IN ONE TOOL amzn.to/3kOMEUF
35-CHAINSAW MILL CAMRYA amzn.to/3nE6zrc
36-OREGON 410 BENCH GRINDER amzn.to/3nSQPkg
37-TIMBER TUFF 8’’ DRAW KNIFE amzn.to/33tOFzZ
38-LONTAN DRAWER SLIDES amzn.to/3qzfkW3
39- WINTER WORK GLOVES amzn.to/36By8fe
40-LUMBERJACK TENON BEGINNERS KIT 1-1/2 amzn.to/39N6H4e

[@Rok_Piletic]

Major Musing: Wolf Paw Snow Tires are Game Changers!

[@OutlawWoodworking]

I’ll check them out , I’m do for new tires

[@Rok_Piletic]

@@OutlawWoodworking should contact @veteransllclandclearinglan5972 as I saw it on his chanell when looking for YT Toolcat ... do you use any Bad Liner Paint or Rustoleum enamel for protection against rust ? ... as i see lots of them start rusting in certain places

[@OutlawWoodworking]

@@Rok_Piletic tool cats are famous for rusting ,I wash it and spray wd40 on it

[@tomn6863]

Good video. I think in 2 wheel steer the rear locks

[@jjack7246]

Nice 🤠 hat

[@OutlawWoodworking]

Thanks

[@twodoggarage3019]

Do you still have 4wheel steer ability with the chains or will they hit the suspension components? Thanks I’m trying to fit some trygg smt on a uw56.

[@OutlawWoodworking]

Still has 4 wheel steer

[@twodoggarage3019]

Good to hear thanks for the response.

[@UnitedStates.]

How steep would you say your toolcat was struggling with? I have a property like yours with around 12 degrees. I bought a tractor with a cab and that thing is scary going down to say the least so now I am selling it. I also have a Kubota utv and it’s really good so I am wondering if I can just buy this thing to replace the tractor and utv.

[@OutlawWoodworking]

It goes up and down a steep driveway ok ,but with a load in bucket on a steep drive it will go down on front two wheels sometimes depending on weight,but I wouldn’t trade it for any atv

[@UnitedStates.]

@@OutlawWoodworking I see. Thank you. What about with the snowblower do you have the same issue with traction? I am just wondering if it would be a good purchase since main thing will be to blow the snow on a steep driveway (12% grade at the switchbacks.) The UTV has been a champ never getting stuck. But I am concerned a lot of forums say traction sucks on these toolcats specially in snow.

[@ernestpribula7949]

Did you ever think about letting 80% of the air out of your tires and after you get the chains as tight as you can fill the tires to over 10% of whatbis recommended.

[@OutlawWoodworking]

That’s a good idea

[@pointdoc1]

Nice video, I could not locate the tracks by Dominator, could you share the link?

[@OutlawWoodworking]

www.americantracktruck.com/

[@pointdoc1]

@@OutlawWoodworking Thank you!

[@willy4571]

weight in the bucket and box would help

[@OutlawWoodworking]

Thanks

[@FrederVision]

Tires look bald ish

[@OutlawWoodworking]

Yah ,I’m ready for new ones,with chains doesn’t matter too much