CAT TURBO on the FLAT NASTY 12 valve cummins!?

[@fords4life914]

HELL YEA SHE RUNS!!!!

[@seatonjosh7063]

Yep manifold gasket

[@Jason-dh4vz]

That’s the manifolds leaking I had that same problem with mine.

[@williamgreen2364]

In the dead middle
Of the manifold check for cracks. Chased boost leaks for a month on one, manifold was cracked

[@pointblankdiesel621]

That turbo is off of a Cat 3126!!! I’m wanting to put one on my next truck badly

[@dalton_5.955]

what mm are those turbos?

[@drakejones7175]

@@dalton_5.955I think there 62

[@7.3life]

To everyone saying don't drive the truck, sitting is the worst thing you can do to it period. Add a little marvel mystery oil to Gpa's truck sometimes that'll make ticks go away.

[@CrazyForCooCooPuffs]

FYI what you think is the turbine housing is the compressor housing, the exhaust housing IS the turbine housing.

[@nardstokes5216]

Keep the vids coming bro. wish they were a little longer lol.

[@KW-R1guy]

Lifters... brother....

[@superdwarf]

Good thing short tube headers do wonders for the sound/tone/ throttle response on those motors. Should fix the tick right up.

[@larryfoulk4466]

Tractor is going against the governor when you put a load on it.

[@timothygibson6431]

The fuse you showed on nasty red really help me out to fix my truck

[@geraldclemens1682]

Definitely sounds like exhaust.

[@Gundamugen]

Lifter

[@ubaldo24v81]

People in Mexico been putting cat turbos on cummins for the longest

[@DieselAddict-vs9fc]

100% exhaust leak

[@joserangel8816]

Sounds like exhaust leck but you can check the valve gap

[@kaseyallen7606]

Sounds like the manifold is leaking pretty common , also another cause could be if you changed the oil and filter and didn't use a mopar filter that will also cause the engine to be noisy

[@Alex61742]

That's exhaust manifold

[@paulrapisarda6057]

Malachi,
I would tend to agree with you. Check the exhaust first then go from there. Keep up the great work.

[@jerryfullen5043]

My 1500 had the same exact noise and mine was the manifold gaskets..

[@tyleramoss4009]

check the manafold bolts

[@jaredwutz2454]

I have an 04 f150, has the same problem, if the engine is warm and the ticking goes away its the manifold. If it persist, check the cam roller/followers.

[@jines2121]

Love the videos man. Definitely recommend after you gwt that carb rebuilt. Running some Rec-90 fuel in her. This ethanol fuel we got now. Definitely hard on these older tractors.

[@DPats1228]

I thought my used 6.7 Cummins had a cat turbo. But it wasn’t. S300. Same part number off a cat, industrial injection phat shaft silver bullet 66mm.

[@raynemergut1894]

My brother in law had his Cummins built by them

[@DPats1228]

@@raynemergut1894 must be nice

[@trevdawg6.6]

Exhaust manifold

[@mikesawyer7151]

Check manifold bolts mine on my truck broke and that’s what it sounded like but it definitely a exhaust leak

[@jonahkueny9811]

My John Deere b has a load screw. When I rebuilt the carb it would still sputter releasing the clutch in road gear. Just took some adjustment.

[@stevenalbert4435]

The way it’s loping like that sounds like the governor. Especially if it’s only doing it under load

[@daylencrews19]

Thats exactly what i was going to comment those governors will get sloppy and worn out on Ya

[@LOUDNPROUD]

@@daylencrews19 Where’s that located on the tractor?

[@daylencrews19]

@@LOUDNPROUD sitting on the tractor it is on the right side of the tractor infront of the distributor. You should see a rod coming out of it and running across the front of the engine behind the fan bent if you follow that rod to the other side of the tractor you should see it connected to a linkage that goes to your carb

[@richardcorley364]

Check the fuel tank for rust floating around inside the tank

[@NoahDeCesare]

Love FLAT NASTY

[@jamesmarlar696]

Definately exhaust leak have a tendance to crack manifold or brake bolts

[@jasonstoltzfus6540]

Honestly just sounds like you need to give er some more throttle. I could be wrong. The sound from grandpa truck sounds like a valve tap but could be just an exhaust gasket or something.
Good luck with both!!

[@adamhogeland8033]

Carburetor can need a refreshment

[@jaxonmanning712]

I also agree with the ppl in the comments. Could be manifold on the dodge 1500. And the tractor just make sure to run good fuel etc

[@QuentinGarcia]

The noise on Grandpa LNP’s truck definitely sounds like a exhaust manifold and gasket. Manifold might’ve warped and split the gasket

[@benjamindonnelly718]

The noise in the 1500 (grandpa truck) is a common exhaust manifold leak
It's not a big deal or a difficult job to do

[@yjmoneypit]

yeah defiantly sounds like manifold leak posible broken bolt or bad gasket

[@Deckers_fab]

Manifold leak very positive an common on these trucks. Breaks the bolts against the fire wall an causes a leak. Most times when removing u will break more. Gotta drill them out an re tap

[@12footstroke15]

My guess is the first 2 bolts toward the front on the passenger side exhaust manifold are a little loose. 🤙🏻

[@fords4life914]

its a turbo from a CAT bulldozer

[@fords4life914]

it identifies as a cummins with a lope tune lol

[@lillamm8068]

Could be a lifter knocking

[@hDfab5.3]

Comment here if you were here within 15 minutes

[@Mrright-fi2fm]

It's actually a caterpillar C7 Turbo and caterpillar makes a good motor used to they don't make them anymore

[@dixiemae5042]

Actually if ya gots yourselfs a broken block … they’ll cast a new block for ya 👏🏻👏🏻

[@RyanTripp1978T]

I looked at the numbers on the turbo, and it's either off a Cat 3126, or a Cat C7. The cat C7 is the more "evolved" version of the two. It is highly possible that both used the same turbo.

[@bradcarroll5265]

Sounds like a exhaust leak to me.

[@thomasdavis4326]

If the tic goes away after it warms up prob exhaust manifold gasket leak signed TJ from Missouri 👊🇺🇸

[@jonathanmoyer6424]

That's exhaust bolt manifold on the motor that's probably broken off I've got a 2001 off-road Edition Dodge and I had like two or three of them broke off on my motor dude I would definitely drive it there a good truck to drive if the motor wears out put a new motor in it

[@richardbalkavich479]

That noise in your grandpa’s truck could the famous “hemi tick” it is very important to change the oil at the right intervals because all of the little holes and areas the has go to. Does it just do it when it is the first cold start of the day and go away when it is warmed up? I have a new hemi and mine ticks for a few seconds on a cold start but mine has less than 20, 000 miles. Do not like that ticking noise. Hope it just an exhaust leak or loose bolts for you. Great video! Great content and keep it up! Stay safe and healthy for you and your family!

[@laisuresboringadventures7052]

But a 5.9 isn't a hemi

[@richardbalkavich479]

@@laisuresboringadventures7052 hehehe, then it can’t the hemi tick. Is the 5.9 gas considered better engine than the hemi engines that are in newer ram trucks? Do not know much about the gas engines in ram trucks?

[@laisuresboringadventures7052]

@@richardbalkavich479 yea ive herd the 5.9 gas 2 be a good motor just like the 5.9 12v

[@Bwilmoth213]

I've had the 318, 360 and hemi gas motors and every single one would do this about 500 miles before the oil was due to be changed like clockwork, changed the oil and it went away, it's annoying but you're never late on changing the oil, lol

[@laisuresboringadventures7052]

It's a lifter tick or exhaust manifold leak

[@440commando]

Don't run cheap gas in the tractor and make sure fuel filter isn't clogged with junk. Try putting sea foam in tank or some sort of ethanol treatment

[@tomgorrell4022]

It’s a lifter tick

[@johnsmith-gx4zb]

Before you rebuild that carb open the load valve maybe half a turn

[@thomasisherwood9756]

They are notoriously known for Manifold leaks!!

[@mikescott6647]

Still considering a nice stack for the Alice? I think it'd look sweet

[@danieleaglen1273]

I came across your videos about 2 months ago and now I watch them all hope one day I can win a truck from you and I can't wait for my stuff to come in the mail

[@garthee01]

Either lifter tick or the manifold to me it sounds like a lifter tik

[@trucks_n_tractors_6335]

Be careful starting that tractor like that with the crank if it kicks back it can break bones

[@derajyellat102]

Crank towards yourself with hand upside down so it it kicks it will fly out of your hand and go away from you

[@dylanjohnstone996]

Does this tick go away after heated up?

[@adamhogeland8033]

Could be a 3126 cat engine turbo

[@Mrright-fi2fm]

Actually I looked it up it's a cat c7 turbo and caterpillar makes a good engine used to they don't make them anymore

[@adamhogeland8033]

@@Mrright-fi2fm 3126 was the early version of the c7

[@Mrright-fi2fm]

@@adamhogeland8033 oh ok I didn't know that I Google what he showed and saw that it was a C7 turbo

[@adamhogeland8033]

@@Mrright-fi2fm 3126 was a 7.2 liter came out around 97 and the c7 platform was introduced by 02 03 some where in that time frame that said the turbo would be a beast for a 5.9 Cummins

[@Mrright-fi2fm]

@@adamhogeland8033 oh ok that's awesome my uncle owns a diesel shop and works on this type of stuff never told me about any of this learn something new everyday

[@wyattwatson3547]

It’s an exhaust leak, probably cracked manifold

[@chaseviter6077]

Here

[@spicersgarage6470]

First time I entered your giveaway hope I win lol

[@mattperry5989]

Manifold leak 100%. Get some shorty headers for it with some high quality gaskets.

[@eldelsoldrums4207]

Do some doughnuts.!😎✌✌😁😁

[@justinderossett8846]

I hope to win it but I've never won anything I'm my life but I'd still congratulate whoever won it

[@prestonmcdowell1351]

Kinda sounds like a rod nock but don’t take my word make sure the simple cheap things are ok first

[@bobbymattox2654]

Sounds like a lifter not getting enough oil

[@big-_-hoss2190]

I almost got my hopes up on a fake Instagram account

[@laisuresboringadventures7052]

Its starving for fuel

[@440commando]

Get a new battery!!!

[@duthsmotocave]

Second.

[@jakebody6031]

First?

[@hDfab5.3]

First

[@dixiemae5042]

First to say … I’m first 💁🏻‍♂️