Це відео не доступне.
Перепрошуємо.
SHELLY PRO SERIES | Professional line for supreme home & facility automation
Вставка
- Опубліковано 15 вер 2021
- Enjoy supreme home and facility automation with Shelly’s professional line of smart switches. Enhanced with temperature, overpower, and overvoltage load protection, Shelly Pro series is designed to be installed inside the breaker box (DIN). Allowing full smart automation with no additional cables or wiring, Shelly Pro line is perfect for homes, offices, stores, business, and manufacturing facilities, as well as new buildings.
Learn more at our website at: shelly.cloud/s...
Great to see DIN rail units. Love the products and the reliability. Works perfectly with Control4 for fan and switched lighting control.
Great work, but where is the dimmer version.
Exactly
We need the dimmer version!! Are they planning to release it?
Fantastic! Please get Australian certification for these.
It is genrally the importers responsibility to get certification.
@shelly will we see Pro series dimmers?
The overpower protection is almost what I needed. It just works the wrong way around.
I want to turn a device on when my PV generates enough power.
Well done!
It would be nice to have a 3-phase one.
I would love that
What is range on the relays? I need to control pump’s wirelessly inside a factory. This would include inside control panels behind concrete walls
Are they dimmable? I am currently using an array of Shelly Dimmer 2. I managed to short circuit two of those already and am currently thining about putting another rack of fuses inbetween them and the consumers. Just in case I'm stupid again, so I don't need to buy a new shelly dimmer 2 each time. I would much rather have the shelly have it's own fuse / short circuit protection. I'm already thinking about wether I *really* need my lights to be dimmable because of this. But if I could have it all, well, I'd buy it all.
Looks a lot more integrateable into the curcuit breaker box with the DIN rail mounting system.
But I'm still missing a dimmer and an RGB controler for light strips?
Seems like these can be used for simple basic automations like "Switch on light at sunset" and as a response to a motion sensor. That doesn't seem to leave a lot of room for wider home automation solutions like setting scenes or situations like "If house is in sleep-mode and motion sensor in bathroom is activated set light at 15%", or am I wrong?
I'm not sure if they plan to create a dimmer or RGBW controller, since those, at least in my opinion, don't fit in well with a central installation. What they do have here are the sort of things that do make some sense as master on\off switches.
the Shelly Pro 4PM is not suitable for three-phase and inductive loads.
The VDE marks are also missing.
Nice i need this ;-) for my channel
How can I reset a "Pro 1" or "Pro 2"? They got freezed after connecting with the shelly cloud. The usual (turn off and on; then 5 times pushing reset button within 60' seems not to work for me.).
Why is the 4pro not supported for 24vdc switching 🙄
Can anyone answer please if these would work on the UK Ring Main Circuits? And what about the higher currents that are regularly used in the UK? 32A for Cookers and Sockets, and 40A for Showers.
Sorry for the late reply (just saw the video now). Consult with an electrician, but I'm assuming that, as long as you have phase and neutral, you should be fine. Yes, I know in the UK some houses use a ring topology, and that can change things, hence "consult an electrician" to make sure.
As for higher currents, you'll need to use contactors instead. That's what I have had to do with an EV charger circuit that can pull over 16A. You replace the existing circuit breaker for that particular appliance with a contactor breaker with the same rating, and use the Shelly to control the contactor, which in turn turns that particular circuit on or off. Basically, the Shelly acts as a low-power switch that powers a much higher power one.
Do keep in mind that sometimes the contactor can "bounce" when turning it on or off. Meaning it can go back to on when you send the "off" command, and vice-versa. It's gotten better on my implementation (Shelly EM) over time, but I never got it to work 100% reliably before I moved out of that place. Not sure if it was a Shelly issue or a contactor issue, because the bounce would be more frequent when the circuit was under load.
@@nanianmichaels This is me being curious about it, not something to bother an electrician about. It seems that Shelly is lacking in the higher currents, which is a shame, as if you are going to use this to monitor and control each circuit, your limited to 16A and below circuits, like lights. I have 12 circuits in my home, and only 4 would be suitable. 4 outa 12, not worth it. For me, I would have all the standard DIN rail breakers for all the circuits (MCB, RCD or RCBO/AFDD), then have these in line after them in a double rail config. That way, I have the electrical protection from reg breakers that are known to be really good, and the flexibility of smart control + monitoring. I did come across some smart Zigbee/WIFI/Bluetooth circuit breakers that are made in China from a company called Tongou. That put me off right there, but after researching them, they seem to be a reputable company that caters mainly to the industrial sector, and been around since the 90s. And they offer from 1A to 63A, from simple monitoring to full control + the standard protections as normal breakers. While that is the case, If I did go for these, I would still go with the in line method as i said before. They seem to be a good option, BUT it is a product from China, so the big question is, would I trust it to work as intended? If only Shelly would increase it's product line past the 16A mark. Have a look urself if ur interested. elcb.net/product-category/smart-circuit-breaker/
Will there be future KNX compatible devices?
support homekit?
What is the release date for the Shelly 1Pro and 1PM Pro?
Looking forward to trying these out. Is there a UK release date yet ? Thanks.
Great! Available to buy when, pricing?
Do you support mqqt as source?
Still showing Coming Soon in your online shop. Any ETA, please?
Hello @Shelly!
The DIN Shelly pro 1/1pm Can be use for replace the circuit breaker?
Will work according like a normal circuit breaker A/B/C or D characteristic?
In the typical household there are few inductive device (like washing machine or power tools), which are consume more than 16A for a few milisecond when it is turned on. A typical circuit breaker are allow this limited time over power.
The simple Shelly 1/1pm are not allow this limited time over power. It is turn off immediately when it reach the 16A.
Shelly pro 1/1pm will allow this limited time over power?
They're not safety devices. The over power cutout feature is nice, but it's not a substitute for an overcurrent protective device. You will still need a circuit breaker.
a shelly pro is an array of relays fitted in a box that carry the same function as any other switching device, thus they are always placed behind a safety device like a circuit breaker.
Hi Can I set shelly 2 pro (din version) as roller shutter ? (The same as shelly 2.5 ?)
..or another DIN type from shelly...
Late to reply, but from the video and the documentation on the 2 Pro, it seems to be basically a DIN-mountable Shelly 2.5, with all its capabilities, plus all the other fun stuff that the ESP32 brings, like Ethernet and BT.
Is native HomeKit support planned?
Yes, they mentioned it in the live
@@mon4e3yy Hi Monica, can you pls give me a link? I'd like to watch that. Thanks
Hi there, I was wondering if the manual switches work regardless (Shelly Pro 4PM)? For me, when I turn off the light / line using the Shelly app (the relay), I need to turn the manual switch on and off again for it to work. Have I was wondering if I am doing something wrong? Help.
you have the option set to follow rather than flip. You turn the light off with the app, then the switch has to be flipped to off position then to on position to make it work. Just change the option to flip. It is in the one pole video if you give it a watch
@@doccock100 Thank you got it. Going all in on Shelly. Hope for the best!
@@anandhaponnampalam shelly rgbw2 video and go to 4:06. the option is now called toggle or edge. You have yours set to toggle. Now change it to edge to do what you want. Of all the systems I would go all in on shelly if I was you. Its not the prettiest but the function, I think, is the best.
Shame you don't have NC relay inputs, would of been a great product otherwise.
Make one for Canada :)
Hi! I wonder if this works with Home Assistant? or easy to add to third Party? i am doing rebuild and want full control of everything
2:17 Shellys should work with Homeassistant. They even show it at the end of this video
Late to reply, but ALL Shellys have been basically a drop-in and couple of clicks to setup inside Home Assistant for a few years, now. You don't even need a third-party script anymore.
من اين احصل على ريلية 25A شيلي
What about higher currents, like 20-40a mcbs?
Don't need a 20A. The 20A breaker is usually for 80% which is 16A. And the 40A they do have now for the 4p
Hi, there. Late to reply, but I have only seen the video today. For higher currents you can use a contactor breaker. You replace the current circuit breaker with a same-rate contactor one, and connect the Shelly to the contactor. I've used this method for a "dumb" EV Charger that can pull over 16A. No Power Metering on that solution, though, unless you're using a Shelly EM specifically for it. Also, do keep in mind I'm in Europe. IMMV in the US.
Piazzato il primo ordine in Febbraio 2022, ad oggi il modello PRO 2 PM è disperso, tra scuse varie tra cui il camion fuori strada....