Took me 2 hours so far using a jack and axle stands but still the disk is not off - it took this guy under 4 minutes to get that far - I reckon they disassemble all bolts first then fit it all back together again, before they start recording.
Unfortunately, the complexity of replacement is individual on each particular model of car and it all depends on the technical condition of the parts. Our videos are for informational purposes and show only in the sequence of replacement and to save time, we loosen some of the units in advance. AUTODOC
@@autodocuk Yes that is ok -no criticism. I was only trying to warn other amateurs like me that the jobs are not as quick as filmed - but to not despair.
I have an Octavia 1.4 TSI, 2010, presumably a 1Z4. The procedure is slightly easier as the caliper carrier bracket does not need to come off to change the disc.
WARNING Why have you not yet corrected the torque you have shown for the brake caliper carrier bolts from 75 up to 190 or 200 Nm - as pointed out by John Ralph below ?
Exceland done sir do you have a video for repairing or replace the VGA for dashboard skoda octavia Mk1 the problem is the vga disappear data with hot weather at summer and at winter its working will thanks
Thank you for your attention! You are right, we made a mistake in the credits. Unfortunately, we cannot change the credits, but we will add information to the description. The correct catalog information: Tightening torques for front disc brake caliper bracket = 190 Nm Stay tuned with us. AUTODOC
Ah man I'm so annoyed, just took everything apart then realised I need an H7 Allen to get the caliper off - since when does anyone use 7mm Allens!? Literally never come across this in my life and haven't got one anywhere! Why didn't I watch the video before attempting it 🙈🤣
![How to change rear brake discs / rear brake rotors on OCTAVIA 1Z5 [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/Lup02KizHEM/mqdefault.jpg)
![How to change rear brake discs / rear brake rotors on OCTAVIA 1Z5 [TUTORIAL AUTODOC]](/img/tr.png)
Just bought an Octavia Scout and it needs a front brake job. This video will be handy, good job.
We are glad that this video was useful to you!
AUTODOC
Took me 2 hours so far using a jack and axle stands but still the disk is not off - it took this guy under 4 minutes to get that far - I reckon they disassemble all bolts first then fit it all back together again, before they start recording.
Unfortunately, the complexity of replacement is individual on each particular model of car and it all depends on the technical condition of the parts. Our videos are for informational purposes and show only in the sequence of replacement and to save time, we loosen some of the units in advance.
AUTODOC
@@autodocuk Yes that is ok -no criticism.
I was only trying to warn other amateurs like me that the jobs are not as quick as filmed - but to not despair.
Good brake job
Very informative 👍
Thank you for your feedback!
We are glad to know this tutorials was useful to you.
Stay tuned for more!
Best regards,
Autodoc team!
I have an Octavia 1.4 TSI, 2010, presumably a 1Z4. The procedure is slightly easier as the caliper carrier bracket does not need to come off to change the disc.
Thanks for your feedback!
We are glad that you like our work. Stay tuned for updates.
AUTODOC
WARNING Why have you not yet corrected the torque you have shown for the brake caliper carrier bolts from 75 up to 190 or 200 Nm - as pointed out by John Ralph below ?
Which key and brand you can recommend for this purpose? Thanks
@@sergenity 190
190 Nm
Exceland done sir do you have a video for repairing or replace the VGA for dashboard skoda octavia Mk1 the problem is the vga disappear data with hot weather at summer and at winter its working will thanks
Thank you for your interest in our channel.
But unfortunately, we do not have such a video.
Best Regards,
Autodoc team
@@autodocuk thanks a lot sir
Great videos but never have I ever seen bolts remove so easily lol
Thank you for sharing your opinion!
Is the impact driver 100% necessary? Can normal sockets be used?
Ordinary butt ends can be used.
You quote 75nm torque for tightening the brake carrier bolts. I thought it was about 200nm. That’s a big difference. Which is correct please?
Thank you for your attention!
You are right, we made a mistake in the credits.
Unfortunately, we cannot change the credits, but we will add information to the description.
The correct catalog information:
Tightening torques for front disc brake caliper bracket = 190 Nm
Stay tuned with us.
AUTODOC
What kind of spray is that? copper?
1520 Liqui Moly
AUTODOC
..hi..a video for replaceing discs/pads front/rear for octavia 1.6 diesel 2015 please..thank you..
Thank you for your comment!
We will take into account your wishes when shooting new videos.
Best Regards,
Autodoc team
Is it necesary to add cooper grease? Is it not necesary to grind new pads with angle grinder?
Copper grease should only be used on threaded connections. No need to grind new pads.
AUTODOC
As far as i see in this video, you did not add copper grease only on threaded conections, but on whole surface between wheel and disk.
Ah man I'm so annoyed, just took everything apart then realised I need an H7 Allen to get the caliper off - since when does anyone use 7mm Allens!? Literally never come across this in my life and haven't got one anywhere! Why didn't I watch the video before attempting it 🙈🤣
Thank you for following us and we hope our videos were useful.
Stay tuned with our channel.
AUTODOC
That's a lot of copper grease! And I'd never spray it on. A brush is far better.