If anyone is having this issue after doing a Windows upgrade, the solution (at least in my case) was going into the command prompt and entering the following: diskpart > list disk > list volume > take note of the letters of the drives > dir c:/ you're looking for the drive with windows and program files on it, if it's not in drive c enter the same command but with the other drive letters you took note of in the previous step. Once you've verfied the drive that contains windows and programs, take note of the drive size ex: 1TB, 500GB, ect. Next step is to turn off your computer and press the key that gets you into your BIOS/UEFI (in my case it was f2 but will vary depending on your motherboard), once in your BIOS/UEFI go to the boot tab then boot option 1 and change that to the drive that contained windows and programs based off of the size you took note of. In my case my Windows 10 was installed on a 256GB nvme but after upgrading for some reason it installed Windows 11 on my 1TB nvme and my boot option 1 was still set to my 256GB nvme. Hope this helps someone
Michael, thank you so much for the information, my problem was exactly the same, a windows update changed the order of the boot options. I struggled for hours from the command window trying to solve it, and you gave me a 2 minutes solution. Thanks a lot.
Everything was going well I assigned successfully drive letter v, after exit, leaving diskpart, then typing \source>v: Access is denied. So what is the next step to proceed ?
In my case, I also experienced the same "Access denied" problem but I just continued with his instructions till the end and it worked for me. Probably those instructions may or may not work for some laptops. My thoughts though.
Hello, I have done all process that you have told in this vedio,but my problem is still remain same getting blue screen again, what should I do without loose my installed software which is very important for me. Please suggest me with other options without loosing any. Thank you
Wait, excuseme. In the last cmd tutorial, "attrib c:\boot\bcd -h -r -s", mine response is "Path not found - C:\boot" could you please Sir, figure it out why?
The 4th fix almost worked for me - up to c:\boor\bcd -h -r -s "path not found". I notice that in the command prompt window "X: \" appears rather than "X:\windows\system32\cmd.exe2 although that DOES appear at the very top of the window in the outer😩 box. I'm lost 😢 Please help
After performing the 'c:\windows /l en-us /s v: /f all' command it states 'Failure when attempting to copy boot files.' Everything prior to that was successful. Any ideas....?
My PC isn't entering the advanced recovery environment...when i try, its interrupted by a black screen saying STOPCODE PROCESS1 INITIALIZATION FAILED and it restarts back to windows. I cant get it to the advanced recovery environment let alone safe mode, please help!
bcdboot C:/windows /l en-us /s V: /f all command era isn't working if it works so window could open tell me what should I do here thanks kindly reply me thanks 🙄
10:55 while following this step bcdedit /export c:\bcdbackup I get error saying "This drive is locked by bitlocker drive encryption. You must unlock this drive from control panel" Now the problem I don't know bitlocker password, neither I can open control panel because my pc won't open its given blue screen saying unmountable drive
My pc give this mesg .you need to sign in as an administrator to continue.but there are not any administratrator accounts on this pc.what cat i do now.
This is really knowledgable vedio ...its too helpful vedio ...i liked and subscribed .... Why because nobody will give so much information simply ....am sure this has helped so many and helping too 😊
In 3rd Salution while commanding md \efi\microsoft\boot\ has no response on these in my pc but I further trying to proceed... I got my pc problem while opening different chrome a/c in my computer suddenly my operating system got lack and my computer given me QR code that I had taken picture of that but I am continue trying to open my operating system that I didn't get ..please help me 😭
Hi I am facing a problem on my laptop oberegion oobekeyboard kindly tell.m if I use the cmd method for this error, and then which key I used to done?any specific key
Hi, I tried your all the ways but still my system is not starting. Actually iwhen it was working that time I went to services. Msc and disabled the windows license manager and restart but it didn't get restart and problem starts from then.Can you please help me?
Sir mery PC mn startup setting ka option ni arha USB boot Jo Kya mna udr sa repair ko choose Kya lkin sir Mera PC on krka dosri lead sa Jo graphic card ka bgar wali ha aus sa on krka mna setting mn jakr jab advance option on Kya tu fr startup setting agye ha but sir Kya yh work kra ga yhn pr plz help 😢😢
@@voncrimson my windows bootable usb i had issued. Using another windows 10 bootable USB, i got the access i need and formatted all the partition except D drive (storage). Made new partition for windows and reinstall it. Repair was not working at all. :( formating the recovery folder through dispart made it more troublesome. so i would advise against it.
I can't reset my PC, I have done everything but it's not working. I have watched all the UA-cam to find how to solve the problem, please can you help me ? My PC is Dell laptop and it's windows 10
In the last solution , it was ok until I typed attrib c:\boot\bcd -h -r -s When I typed this I get error “path not found - c:\boot What can I do for this ? None of other solutions are not working for me
After the can mine said it found corrupted files and fixed it but when I reboot it still didn’t boot up , the screen black with backlight and cursor spinning
Hi...can you please help me with this...i was using bluetooth enabled keyboard with my pc as the keyboard was not working. Now I am having issues with booting and when I tried the command prompt, it is not allowing me to use my bluetoothed key board, and I cant type all letters from my original keyboard as it was not fu ctioning from before...how can i proceed now..i will be grateful for a suggestion which can help me solve this problem..thanks in advance all
After bootrec /fixboot it is showing access denied....
Please help🙏
Watch the it properly mate it tells you how
Hey try “bootsect/nt60 all” then do “bootrec /fixboot”
Then what@@cappablecannon1824
@@cappablecannon1824 thanks!
When do "bootsect/nt60 all"
Show the system cannot find the path specified
Please help
My HP laptop opened after quite a long instructions process to follow through. it was worth it. Thanks man for your kind help.🤜🤛🙏From Kenya🇰🇪
i was 2 hours problaly more on doing this alone but you helped me in 5 min ty bro
Well, done it all, no luck hoping anyone else with the issue gets by
did you get a new computer
when I put "attire c:\boot\bcd -h -r -s", it said "path not found - c:\boot"
If anyone is having this issue after doing a Windows upgrade, the solution (at least in my case) was going into the command prompt and entering the following: diskpart > list disk > list volume > take note of the letters of the drives > dir c:/ you're looking for the drive with windows and program files on it, if it's not in drive c enter the same command but with the other drive letters you took note of in the previous step. Once you've verfied the drive that contains windows and programs, take note of the drive size ex: 1TB, 500GB, ect. Next step is to turn off your computer and press the key that gets you into your BIOS/UEFI (in my case it was f2 but will vary depending on your motherboard), once in your BIOS/UEFI go to the boot tab then boot option 1 and change that to the drive that contained windows and programs based off of the size you took note of. In my case my Windows 10 was installed on a 256GB nvme but after upgrading for some reason it installed Windows 11 on my 1TB nvme and my boot option 1 was still set to my 256GB nvme. Hope this helps someone
I think windows 10 having this issue in it's upgrade 🙁
Me too facing this issue after update !!
Sorry man, I dont understand
So how do I change to boot with option 2?
Cannot enter bios to do this
Michael, thank you so much for the information, my problem was exactly the same, a windows update changed the order of the boot options.
I struggled for hours from the command window trying to solve it, and you gave me a 2 minutes solution.
Thanks a lot.
Thankyou.. I tried many many ways but with solution 2nd worked in my case thanks...
Thank you for your video. It was my last try and you got me to the correct menu so I could resolve the issue. 😂
Step 1 worked. Thanks!
Everything was going well I assigned successfully drive letter v, after exit, leaving diskpart, then typing \source>v:
Access is denied. So what is the next step to proceed ?
I have the same problem did you find a solution?
watch the full video first bro
In my case, I also experienced the same "Access denied" problem but I just continued with his instructions till the end and it worked for me. Probably those instructions may or may not work for some laptops. My thoughts though.
Best of the best. Much appreciate your help, brotha!
Hello,
I have done all process that you have told in this vedio,but my problem is still remain same getting blue screen again, what should I do without loose my installed software which is very important for me. Please suggest me with other options without loosing any.
Thank you
Did your problem solve?
thanks bhai..
kaam kr gya
solution no 4.
love you bro.
Thank you! The CHKDSK command fixed the problem for me.
how much time
@@gulshansinghrai don't remember, probably around 10 mins or more
Why my access is denied
THANK YOU SO MUCH BROTHER ITS WORKING!! IM NOT LYING IT'S WORKING..
bro i almost cried for 1 hour ;'. but after this video finnaly it worked thx ❤❤❤
Thank you very very much i don't know how can i thank you you really save my life god bless you ❤❤❤❤
Wait, excuseme. In the last cmd tutorial, "attrib c:\boot\bcd -h -r -s", mine response is "Path not found - C:\boot"
could you please Sir, figure it out why?
Same
Same😢
Same 😢
@@shaktidhar245 same
Same
Wooahhhh thank u solution #1 works on me...thank u veryyyyyy much😢😊
Thanks alot.. it 100% works 💯
Thanks man.
God bless you.
Yessss...... It success at last method.. 👍👍👍
Worked great thank you for this token of knowledge
It's Woking 🥰. Thank you brother
En el 3 cuando escribí el comando (V:\efi\microsoft\boot>bootrec /fixboot) me da acceso denegado que hago?
I have the same problem😢
The 4th fix almost worked for me - up to c:\boor\bcd -h -r -s "path not found". I notice that in the command prompt window "X: \" appears rather than "X:\windows\system32\cmd.exe2 although that DOES appear at the very top of the window in the outer😩 box. I'm lost 😢 Please help
super, it work and it solved my problems with booting w10 :)
Bootrec /fixboot it shows access is Denied.. pls help me how to repair my pc
Same goes with me
This man save my life 😅
After performing the 'c:\windows /l en-us /s v: /f all' command it states 'Failure when attempting to copy boot files.' Everything prior to that was successful. Any ideas....?
I also have this issue
I have same bro
My PC isn't entering the advanced recovery environment...when i try, its interrupted by a black screen saying STOPCODE PROCESS1 INITIALIZATION FAILED and it restarts back to windows.
I cant get it to the advanced recovery environment let alone safe mode, please help!
It asking for command number what should i put?
Sir , attrib c:\boot\bcd -h -r -s
After this, path not found c:\boot
It's not showing successfully and select volume which one i should select showing
same broo
I get the same thing!! 😢
??
Yeah, he didn’t go over what we should do about that, smh 🤦🏾♂️
Seriously, Thankyou 😂❤
4th method saved my life
THANK YOU!
How did you get past the “ atrrib “ step? Please & thank you I advance!!!
I really think you for this with video I was trying a long time to solve this issue
The system cannot find the file specified at 7.53 and 4th method bootrec /fixmbr
How do you mean by hypan
I still hv the sam problm, but its due to low memory. Can u tell me how to delete som files. May b it work by creating more space
bcdboot C:/windows /l en-us /s V: /f all command era isn't working if it works so window could open tell me what should I do here thanks kindly reply me thanks 🙄
I’m hitting esc and F11 but keeps putting me in restart loop. What other options do I have?
How to Create Windows 10 System Recovery Partition. ua-cam.com/video/wUBTMkkKdaU/v-deo.html
thanks…. it worked for me ❤
10:55 while following this step bcdedit /export c:\bcdbackup
I get error saying "This drive is locked by bitlocker drive encryption. You must unlock this drive from control panel"
Now the problem I don't know bitlocker password, neither I can open control panel because my pc won't open its given blue screen saying unmountable drive
Same issue is coming in mine
the 4th method done all the steps but at attrib c:\boot\bcd -h -r -s gets the error path not found c:\ Is it because I have a different boot order ?
Saaaame😢
My pc give this mesg .you need to sign in as an administrator to continue.but there are not any administratrator accounts on this pc.what cat i do now.
This is really knowledgable vedio ...its too helpful vedio ...i liked and subscribed .... Why because nobody will give so much information simply ....am sure this has helped so many and helping too 😊
Thank you so much 😀
HELP, I tried solution #3 and I can only get to the point fixboot, then I get a message of access denied.
Same problem
Thank You Sir !!
Thank you brother ❤
In 3rd Salution while commanding md \efi\microsoft\boot\ has no response on these in my pc but I further trying to proceed... I got my pc problem while opening different chrome a/c in my computer suddenly my operating system got lack and my computer given me QR code that I had taken picture of that but I am continue trying to open my operating system that I didn't get ..please help me 😭
Tks u so much brother❤
Thank you man i love you so much, keep up the good work
Thank you! You are a life saver 🙏
Thanks for sharing these. My Boot Disk is showing up with "Unknown" status on the DiskPart command!! How can I change the Status to online!?
Please help. Fourth method, "attrib" step, I get path not found - C:\boot
Hi I am facing a problem on my laptop oberegion oobekeyboard kindly tell.m if I use the cmd method for this error, and then which key I used to done?any specific key
Hi,
I tried your all the ways but still my system is not starting. Actually iwhen it was working that time I went to services. Msc and disabled the windows license manager and restart but it didn't get restart and problem starts from then.Can you please help me?
Love you brother you are so grate
Thankyou so much 😢😢😢thank you alot
When going for bcdboot c:\windows /l en-us /s v: /f all it say error
I have done all the steps but it's not working. Please help
First step works for me, thanks🎉🎉🎉
Sir I accidentally deleted my windows 10 and my pc is not starting it is showing choose an option page please help me sir
Same here
It can be fixed easily search for video with the name how to reinstall windows from phone to laptop
No i didn't delete my windows it's bringing me on the choose an option Page
@@deadlygaming1000 same idk what happend i was playing then restarted the pc then boom
oh
Sir mery PC mn startup setting ka option ni arha USB boot Jo Kya mna udr sa repair ko choose Kya lkin sir Mera PC on krka dosri lead sa Jo graphic card ka bgar wali ha aus sa on krka mna setting mn jakr jab advance option on Kya tu fr startup setting agye ha but sir Kya yh work kra ga yhn pr plz help 😢😢
Yeah it just asks for a password when I try open command prompt and I don't remember the email, what do I do?
sir, after bootrec /fixboot
the prompt replied "Access is denied" ... (I followed the instructions carefully) I think my laptop is really broken, help
Same😭
Same
Attempted at Solution 3 but encounter the problem of CMD cannot recognize code: bootrec /fixboot. please assist.
After attrib c:\boot\bcd -h -r -s.. I was told - C path not found
Hello, I did the last step, and when I typed "attrib c:\boot\bcd -h -r -s" , it says: path not found - c:\boot. Pleased advise. Thx
same here, have you resolved it already? :(
I dont have a bootable usb but i have a bootable hdd can i open advance system recovery from there
After “attrib c:\boot\bcd -h -r -s” it says “path not found - C:\boot ”
Same
What to do
Me too
@@voncrimson my windows bootable usb i had issued.
Using another windows 10 bootable USB, i got the access i need and formatted all the partition except D drive (storage). Made new partition for windows and reinstall it.
Repair was not working at all. :(
formating the recovery folder through dispart made it more troublesome. so i would advise against it.
Same here
Not working 😢😢😢
Hi my keborad not working after installing a driver
Any help help plz how i can fix it by cmd thank u
I can't reset my PC, I have done everything but it's not working. I have watched all the UA-cam to find how to solve the problem, please can you help me ? My PC is Dell laptop and it's windows 10
put a usb then reinstall
It tells me totally identified windows installations: 0 Please help me
Lots of love. This guy saved me from getting whipped to death today😂😂😂
thanks bro it really helps me a lot
What if it says “Total identified Windows Installations: 0”
Method 4 by the way.
Same prlm.what should we do? Plz tell?
In the 4th way after bcdedit /export c:\bcdbackup I got can't find the path specified what I have to do now
Broo thank you very much 3rd method work for me❤❤
In the last solution , it was ok until I typed
attrib c:\boot\bcd -h -r -s
When I typed this I get error “path not found - c:\boot
What can I do for this ?
None of other solutions are not working for me
After the can mine said it found corrupted files and fixed it but when I reboot it still didn’t boot up , the screen black with backlight and cursor spinning
How did you fix that ?
Thank you very much
Very helpful for me
For Win 11
Which method did you use?
The system cannot find the path specified ? Erro
Reset option is not showing in my laptop Bro. What to do now ? Please Help Me!
Thnkuuuu so much.......🙏🙏🙏
Can you help me please
When I try to copy it told me that there's no enough space on disk
After "attrib c:\boot\bcd -h -r -s" it says "path not found - c: \boot"
Same to me. Pls help
Same please help
Bro, I'm resetting my PC but keeping my files. Will Windows Security Center launch?
Non of them worked , the last way the computer says “system device cannot be found “ help me plz what should i do ???
After using last step i,e bootrec command , still system.going to autinatic repair and there was no change
I'm getting access denied at the fixboot step, anyone know how to fix that?
Same idk what to do rn, have you fixed yours yet?
in my case, installation windows found is (0)
what can I do?
Did you find a solution?
after bcdboot C:\windows /l en-us /s V: /f all it is showing Failure when attempting to copy boot file. Please help!
Please help I have the same error
Fix start up problem method:
I have this: tha system cannot found access path.
Pls help
attrib c:\boot\bcd -h -r -s gives me the error c:\boot\ path not found....
After i typed
bcdboot c:\windows /l en-us /s v: /f all
It said
Failure when attempting to copy boot files
Please help me
Same
Thank you so much. Totally fixed the issue
Thank you so much 🤗
I am very with your knowledgeable video , again I hope you like its vide
Bcdedit /export c:\bcdbackup shows the media is write protected, how do i solve it
Thanks brother its worked for me , solved my problem.
Hi...can you please help me with this...i was using bluetooth enabled keyboard with my pc as the keyboard was not working. Now I am having issues with booting and when I tried the command prompt, it is not allowing me to use my bluetoothed key board, and I cant type all letters from my original keyboard as it was not fu ctioning from before...how can i proceed now..i will be grateful for a suggestion which can help me solve this problem..thanks in advance all
That random Indian guy with the solution for every single problems
In ren c:\boot\bcd bcd. old command desktop show a duplicate file name exists, or the file cannot be found what will do
Try these commands:
Bcdedit /export C:\BCD_Backup
ren c:\boot\bcd bcd.old
bootrec /ScanOs
bootrec /RebuildBcd