I've been vaping for long time and i just recently bought a pod i always thought what if you can just replace the coil and the cotton it will be so much cheaper and easier, however the cartridge cost around 3.5 dollars in my country for like every 10 day use, thank you now i know this it will be much of help.
i made the guide for my daughter coz she wanted to do it herself. i usually did this for her. the key of success is not to make mistake placing the silicon tube. one coil goes inside the tube, the other is outside the tube.and yes, i wouldn't recommend doing this if you're not familiar with this stuff. but on the other hand, keep buying these cartridge cost quite some money.
thank you for your helpful tutorial. I followed the steps and it is working but...can you tell me why my rebuild catridge has burnt taste? from the first use it tastes like it is burnt and I filled the tank with nicsalt, for 10 minutes I waited before I first smoked it. Can you tell me please what can be wrong? thank you so much
@@timi-k5t in my experience, all the burnt taste issues cause by one thing: the wick (cotton) was not having enough liquid when the coil is heating. once this happen, the burnt taste stays forever until you change the wick. so make sure your wick always flooded with liquid when you use it. thats it. i dont know any other reason.
@@timi-k5t if your coil is too hot for example, this could burn your cotton very quickly. so if you use high powered device, i suggest you use higher viscosity liquid, such as pure vg based liquid. pg based is very thin and vaporized very fast when heated.
bro i usually hate people who make vidoes with no talking and just stupid music but you get TRIPLE THUMBS UPP from me. lol not only was the recoiling done clearly but the background music is what makes me rewatch this video every time i do it myself lol. FFVIII had one of the best OSTs in the series ever
omg i havent used my ursa nano yet, but if i did what he did i wouldnt know how to put it back together again! Think i would just replace the pod lol haha, but every expertly done!
i wish that's the case. this bottom cap will always cracking no matter what. i don't think its the pressure, its more likely because of the design. these things break at the same area even when it hasn't been opened yet.
Been using sourcemore for over a year now and never messed up an order they are a fraction of the price you'll pay in a shop lets put these money hungry shops out of buisness
can someone explain why my coil broken immediately? i brought 2 new coiles and one worked for week fine but suddenly I started feeling smell of burning and i changed to another and this one immediately started taste burned
most of the time, burning taste has nothing to do with the coil, usually because of burning wick or cotton. make sure the wick always soaked by the juice. once you forget to refill an almost empty cartridge, the chance are u got burnt taste simply because the coil trying to heat a dry cotton. once that happen, there is no cure, you gotta change the cotton which means you also gotta do the recoiling 😗
@@juandavidlabrador8814 i bought it at online shop but no worldwide shipping. i believe it came from china so it must be available in your country as well. try search using these keywords "ursa nano rebuild kit" in your favorite online store (or google), i'm sure you'll find it. here's the link to the product in my country so you can see how it looks: www.tokopedia.com/phinovape/coil-master-rebuild-kit-ursa-nano-1-0?extParam=ivf%3Dfalse%26keyword%3Dursa+nano+rebuild+kit%26search_id%3D20240802221114222C67A853445016C6AC%26src%3Dsearch
not the first video with this cartridge but i don't understand why cartridge is leaking? 4-5 days and it's leaking. am i only one who buy 6 of it and all leaking? what the point in changining deatils if it leaks...
@@Guttwistah if that happened to all 6 cartridges, identify the cause of the leaking. could be several reasons. i usually suspect the o rings but since this happen to all 6 after 4-6 days, then it could be the quality of the cartridges specifically the plastic material. these cartridges are supposedly disposable (not reusable) they may find a way to design them to break after tampering. i honestly don't know why, but you can inspect every leaking cartridge for damages or signs of wear and tears then go from there.
@@jsvpit I broke one of that metal frame for cotton with coil. Now my cotton wont soak well, you think that might be the cause? I want to know what i've done wrong when trying to rebuild it :/ I would like to do it good to save some money
@@szymek9994 lucky i catch ur question in time 😀. i understand your situation, that's why i made this video in the first place. unfortunately, there's no workaround when you broke important parts. you have to replace it with the new one. doing this is not easy, especially if you don't use magnifier. i use magnifying glasses attached to my head (you don't see it in the video) and it's still quite tricky. its a good investment for diy, particularly this project. if saving money is ur concern, why not buy a cheap rebuildable atomizer? i use UD Bellus for years as my primary vaper. it's a bit chunky but its significantly cheaper than cartridge system. even if you can recoil cartridges successfully. besides, dealing with rebuildables is way easier. it's designed for saving money 💰.
@@jsvpit I know there are better atomizers than ursa nano kit but I got mine from my girlfriend on by birthday and I'm very attached to it because it was gift from her. I'll try to rebuild these better. I also have 0.6 waiting for test which I gave my girlfriend
@@jsvpit Update: It fits just fine and it is even better than the original coil itself! No more leaking and it doesn't burn so fast. Thanks for the reply.
sorry for late reply. i rarely use this account. anyway, the music are from FINAL FANTASY VIII GAME SOUNTRACK by nobuo uematsu. i was listening to that while doing this. forgot to turn it off 😊
Can somebody tell me why my cartidge is leaking? The silicone part is fine where you refill it with liquid, as l found out it is leaking from the bottom of the head where the two holes are...first l thought it is only the original cartidge but l ordered some additional cartidges and the same problem occurs after a week...someone please help😅 thank you😊
I think it may be a problem with overfilling the cartridge. I have the same problem with every cartridge I buy, but lately my friend told me to not fill it to the top, but to the 3/4 and it may stop, if not then you have to buy a new one. I don't know if it works, but I'm testing it right now.
@@waliplays5136 the most common reason why we burned our cotton is because the cotton is dry when the coil burns it. so always make sure it never happen otherwise you'll have to replace the cotton. once it burnt, the burnt taste stays until you replace it.
Not work, The cables are in bad position, one is positive the other negative, they can not go on the same pole connected, missing remove the bolt in the middle of the pod to pass a cable there
iif the mesh coil look identical it should be okay, as long as the negative and positive terminals don't meet when you roll it. basically, if you don't short it, it will work. its the main principle when come to this stuff.
sorry mate, i dont have any other pod and i really cant afford to buy new ones right now. I've already try to search such video for u but seems nobody done it. however, i do find sonder u recoil vid. I'm not sure how similar are those two but might worth checking;: ua-cam.com/video/--yu5DFWSi4/v-deo.html
material coil hanya mempengaruhi efektifitas daya atw suhu dan tidak seharusnya mempengaruhi secara kimiawi atau rasa. kalau ada perbedaan rasa kemungkinan disebabkan oleh faktor lain.
satu2nya kemungkinan beda ada di kapas. kapas pabrikan biasanya materialnya kuat, seprti kain perban. seratnya kuat ga kaya kapas. dan ga ada di pasaran. jadi kalo beli rebuild kit kita dapat material pabrikan. hampir bisa dipastikan, mereka berasal dari sumber yg sama.
setau saya, e plus rba itu ga perlu repot untuk ganti koil. rba = rebuildable atomizer. jadi memang di disain untuk bisa ganti koil sendiri. untuk koil e plus itu bisa pakai khantal yg banyak dijual di pasaran.
@@m_nauval13 wah, kalo itu jujur saya gak tahu soalnya gak punya referensi-nya. saya udah ga punya cartridge ursa nano dan belum pernah pegang e plus rba. saya tahu e plus rba aja dari anda bro. saya malah tertarik sama e plus rba ini. ada rencana mo beli tapi harus ngumpulin dana dulu :P soalnya harus beli thelema elite nya juga.
@@ImanuelRap waduh, nggak tau ya. belum pernah coba pake tisu. tapi kalo mau coba ya silahkan. mungkin akan gampang hangus. mungkin bisa coba dengan bahan kain yg daya resapnya tinggi.spt bahan kanebo. atau pakai stainless mesh. kalo pake stainless mesh, mesh nya harus dibakar dulu ya sampe hitam supaya tidak korslet.
coil master rbk 0.8 ohm. i think its widely available internationally. please check the link in the desc if you want to see the pics at the store so you have idea what u looking for.
sorry to hear that. but its hard to tell where you doing wrong without me seeing it. but if it shorted, it must be because of both coil terminals touching the body.
i understand. especially if you deal with cartridge system. that's why i no longer use pods. i only use rba. i only recoil once every other month, and made my own liquid. i don't really care about the flavor as long as i can feel the throat hit like smoking, i'm fine. the only down-side is the size of it. you know, the old school battery mod gear :D
@@VogtTD rba = rebuildable atomizer.. usually refers to old-style atomizer, which much easier to deal with. its design for diy maintenance. on the other hand, pod style vaping devices, is supposed to disposable type, hence, not easy to do.
@@czjornymurzyn btw moze jestes w temacie, juz drugi pod zalany i po okolo 3 dniach dyntka i sie pali grzala, normalnie zalany, nie zajezdzam go, moze to kwestia bazy ale huj wie
@@gabdab5649 generalnie liquidy cytrusowe, mentolowe itd mogą sprawiać problemy. Musisz uzupełniać liquid jak masz ok 1/4 w zalaną (dla pewności) dotego po zalaniu odstaw go na jakieś 10 minut. Z innych rzeczy możesz zatkać otwory na powietrze na dole i pare razy mocniej się zaciągnąć. Do tego na podach lepiej jest zaciągać się częściej a krócej (ok. sekundy max na zaciągnięcie). Dotego dobrze jest częściej robić przerwy a za to dłużej trzymać parę w płucach
@@czjornymurzyn doobra, dzieki wielkie sprobuje z nowa grzalka i liquidem ewentualnie to moze byc cos z wyjmowaniem kartdridza podczas ladowania? slyszalem o tym cos
I've been vaping for long time and i just recently bought a pod i always thought what if you can just replace the coil and the cotton it will be so much cheaper and easier, however the cartridge cost around 3.5 dollars in my country for like every 10 day use, thank you now i know this it will be much of help.
How's the taste
Did you try it by yourself?
Whats your experience pls share
I tried to make the cartridge 5 - 7 times, it doesn’t work, it can’t be detected @@brittokhan5278
i made the guide for my daughter coz she wanted to do it herself. i usually did this for her. the key of success is not to make mistake placing the silicon tube. one coil goes inside the tube, the other is outside the tube.and yes, i wouldn't recommend doing this if you're not familiar with this stuff. but on the other hand, keep buying these cartridge cost quite some money.
Is it possible to buy the coils and insert them in the pod
thank you for your helpful tutorial. I followed the steps and it is working but...can you tell me why my rebuild catridge has burnt taste? from the first use it tastes like it is burnt and I filled the tank with nicsalt, for 10 minutes I waited before I first smoked it. Can you tell me please what can be wrong? thank you so much
@@timi-k5t in my experience, all the burnt taste issues cause by one thing: the wick (cotton) was not having enough liquid when the coil is heating. once this happen, the burnt taste stays forever until you change the wick. so make sure your wick always flooded with liquid when you use it. thats it. i dont know any other reason.
@@timi-k5t if your coil is too hot for example, this could burn your cotton very quickly. so if you use high powered device, i suggest you use higher viscosity liquid, such as pure vg based liquid. pg based is very thin and vaporized very fast when heated.
this cotton wool in strips comes in several pieces. The ones you separate, do you use all of them or only the external ones?
bro i usually hate people who make vidoes with no talking and just stupid music but you get TRIPLE THUMBS UPP from me. lol
not only was the recoiling done clearly but the background music is what makes me rewatch this video every time i do it myself lol.
FFVIII had one of the best OSTs in the series ever
I hope you know that you are a godsend. Thank you!
Hello! Oh I can't find the rebuild kit here in Iran to repair mine too! 😔😔😔 But thanks so much for the video! 🙏🏻
omg i havent used my ursa nano yet, but if i did what he did i wouldnt know how to put it back together again! Think i would just replace the pod lol haha, but every expertly done!
the bottom cover cracked. what happened? is it the pressure from the pliers?
i wish that's the case. this bottom cap will always cracking no matter what. i don't think its the pressure, its more likely because of the design. these things break at the same area even when it hasn't been opened yet.
Great job 👏🏻
this is ff8 music right?
When i rebuild and try to use it my ursa nano is flashing pink/white what does it mean and how to fix it? Pls help
Got same problem.. as the manual says it indicates 'shirtcircuit'.. so might be we've done something wrong or the coil is not adequate
What is the price of that pod?
the ursa nano pod is around 10-15 us dollars in my country. but the rbk coil master that i use in the video, cost me 2 us dollars.
Been using sourcemore for over a year now and never messed up an order they are a fraction of the price you'll pay in a shop lets put these money hungry shops out of buisness
350 rupees inr
can someone explain why my coil broken immediately? i brought 2 new coiles and one worked for week fine but suddenly I started feeling smell of burning and i changed to another and this one immediately started taste burned
most of the time, burning taste has nothing to do with the coil, usually because of burning wick or cotton. make sure the wick always soaked by the juice. once you forget to refill an almost empty cartridge, the chance are u got burnt taste simply because the coil trying to heat a dry cotton. once that happen, there is no cure, you gotta change the cotton which means you also gotta do the recoiling 😗
Hello. One question, where did you buy the Rebuild Kit and how much did it cost you?
@@juandavidlabrador8814 i bought it at online shop but no worldwide shipping. i believe it came from china so it must be available in your country as well. try search using these keywords "ursa nano rebuild kit" in your favorite online store (or google), i'm sure you'll find it. here's the link to the product in my country so you can see how it looks: www.tokopedia.com/phinovape/coil-master-rebuild-kit-ursa-nano-1-0?extParam=ivf%3Dfalse%26keyword%3Dursa+nano+rebuild+kit%26search_id%3D20240802221114222C67A853445016C6AC%26src%3Dsearch
not the first video with this cartridge but i don't understand why cartridge is leaking? 4-5 days and it's leaking. am i only one who buy 6 of it and all leaking? what the point in changining deatils if it leaks...
@@Guttwistah if that happened to all 6 cartridges, identify the cause of the leaking. could be several reasons. i usually suspect the o rings but since this happen to all 6 after 4-6 days, then it could be the quality of the cartridges specifically the plastic material. these cartridges are supposedly disposable (not reusable) they may find a way to design them to break after tampering. i honestly don't know why, but you can inspect every leaking cartridge for damages or signs of wear and tears then go from there.
@@jsvpit I broke one of that metal frame for cotton with coil. Now my cotton wont soak well, you think that might be the cause? I want to know what i've done wrong when trying to rebuild it :/ I would like to do it good to save some money
@@szymek9994 lucky i catch ur question in time 😀. i understand your situation, that's why i made this video in the first place. unfortunately, there's no workaround when you broke important parts. you have to replace it with the new one. doing this is not easy, especially if you don't use magnifier. i use magnifying glasses attached to my head (you don't see it in the video) and it's still quite tricky. its a good investment for diy, particularly this project. if saving money is ur concern, why not buy a cheap rebuildable atomizer? i use UD Bellus for years as my primary vaper. it's a bit chunky but its significantly cheaper than cartridge system. even if you can recoil cartridges successfully. besides, dealing with rebuildables is way easier. it's designed for saving money 💰.
@@jsvpit I know there are better atomizers than ursa nano kit but I got mine from my girlfriend on by birthday and I'm very attached to it because it was gift from her. I'll try to rebuild these better. I also have 0.6 waiting for test which I gave my girlfriend
Qué tipo de alambre es el que usa ?
we don't use wire for this cartridge, it uses flat coil design especially for this kind of build, unfortunately.
Finał fantasy VIII😉
I accidentally bought a coil for orion mini, do you think it is compatible for ursa nano pro? It's 0.8 ohms too.
i can't tell you whether or not they're compatible since i don't have them. but i don't think they're compatible, sorry.
@@jsvpit Update: It fits just fine and it is even better than the original coil itself! No more leaking and it doesn't burn so fast. Thanks for the reply.
What is the soundtrack of the video? I really loved it :o
sorry for late reply. i rarely use this account. anyway, the music are from FINAL FANTASY VIII GAME SOUNTRACK by nobuo uematsu. i was listening to that while doing this. forgot to turn it off 😊
I don't get the flavor correctly
Can somebody tell me why my cartidge is leaking? The silicone part is fine where you refill it with liquid, as l found out it is leaking from the bottom of the head where the two holes are...first l thought it is only the original cartidge but l ordered some additional cartidges and the same problem occurs after a week...someone please help😅 thank you😊
I think it may be a problem with overfilling the cartridge. I have the same problem with every cartridge I buy, but lately my friend told me to not fill it to the top, but to the 3/4 and it may stop, if not then you have to buy a new one. I don't know if it works, but I'm testing it right now.
gdzie żeś to złamał
I did everything but my new cotton is burning why?
@@waliplays5136 the most common reason why we burned our cotton is because the cotton is dry when the coil burns it. so always make sure it never happen otherwise you'll have to replace the cotton. once it burnt, the burnt taste stays until you replace it.
Is the same flavor???
I tried the same, and smashed metal coil cover :( need to buy new one insert. Its the hardest stage to open tubes with pliers
true. pliers is the most annoying part on this business.
Not work, The cables are in bad position, one is positive the other negative, they can not go on the same pole connected, missing remove the bolt in the middle of the pod to pass a cable there
Can anyone give me the update if this process works well or not ?
if you have the same cartridges, and can find the correct consumables (the coils and cottons) sure it will works.
Очень интересно, но думаю делать это нужно чистыми руками, а не....
I got the xros rebuild kit, will that fit sir?
iif the mesh coil look identical it should be okay, as long as the negative and positive terminals don't meet when you roll it. basically, if you don't short it, it will work. its the main principle when come to this stuff.
@@jsvpit yes sir, i got the same .8 ohm mesh coil kanthal
I do it but my ursa baby give me a white light
U fucked it up
@@gabedestellano no bro I jast cut the catreg wire 😄
@@q_ab4 white light means short circuit
Please do a tutorial of recoiling sonder q I used to try this but i failed😢
sorry mate, i dont have any other pod and i really cant afford to buy new ones right now. I've already try to search such video for u but seems nobody done it. however, i do find sonder u recoil vid. I'm not sure how similar are those two but might worth checking;: ua-cam.com/video/--yu5DFWSi4/v-deo.html
mantapppp
Untuk rasa, hasil rebuilt yg materialnya beda sama yg bawaan pabrik gimana om?!apa perbedaan’y mencolok?!
material coil hanya mempengaruhi efektifitas daya atw suhu dan tidak seharusnya mempengaruhi secara kimiawi atau rasa. kalau ada perbedaan rasa kemungkinan disebabkan oleh faktor lain.
bedanya dengan pabrikan cuma proses perakitannya. di cina dgn alat yg canggih. kalo recoil sendiri, gampang banget rusak ato pecah sana sini.
satu2nya kemungkinan beda ada di kapas. kapas pabrikan biasanya materialnya kuat, seprti kain perban. seratnya kuat ga kaya kapas. dan ga ada di pasaran. jadi kalo beli rebuild kit kita dapat material pabrikan. hampir bisa dipastikan, mereka berasal dari sumber yg sama.
@@jsvpit makasih om penjelasan’y maklum pengguna baru
Woooowww
apakah itu bisa dipasang untuk e plus rba?
setau saya, e plus rba itu ga perlu repot untuk ganti koil. rba = rebuildable atomizer. jadi memang di disain untuk bisa ganti koil sendiri. untuk koil e plus itu bisa pakai khantal yg banyak dijual di pasaran.
@@jsvpit aku berpikir tentang mouthpiece nya
@@m_nauval13 wah, kalo itu jujur saya gak tahu soalnya gak punya referensi-nya. saya udah ga punya cartridge ursa nano dan belum pernah pegang e plus rba. saya tahu e plus rba aja dari anda bro. saya malah tertarik sama e plus rba ini. ada rencana mo beli tapi harus ngumpulin dana dulu :P soalnya harus beli thelema elite nya juga.
Bg mau tanya kapasnya bisa pake tisu enggak
@@ImanuelRap waduh, nggak tau ya. belum pernah coba pake tisu. tapi kalo mau coba ya silahkan. mungkin akan gampang hangus. mungkin bisa coba dengan bahan kain yg daya resapnya tinggi.spt bahan kanebo. atau pakai stainless mesh. kalo pake stainless mesh, mesh nya harus dibakar dulu ya sampe hitam supaya tidak korslet.
Czemu mi magnez nie przyciaga kartridż? pomocy
magnes* ma dwie strony wariacie polacz kropki
Hey, awesome tutorial.
Can we put 1.2ohm coil?
i personally don't use 1.2 but officially you can use 0.8 - 1.2 ohm for this specific pod.
Nalinget kala amo mairap ya ekalen hahaha
how making cotton ?
i didn't make the cotton. it came with the coils.
bli sperpatnya dimana bang
@@Putuarnawa-o6q di tokopedia. link nya ada di deskripsi harga sekitar 30 ribuan.
which rebuild kit do you use? is there any difference to other we have to look at?
coil master rbk 0.8 ohm. i think its widely available internationally. please check the link in the desc if you want to see the pics at the store so you have idea what u looking for.
Шо робити якщо на катриджі ватка біла але вкус ніби як гарік
Тоже самое , поменял вату и сеточку , по итогу вкусопередача плохая , к тому же вкус Гарика
I follow this step and my device got short circuit.🤦🤦🤦
sorry to hear that. but its hard to tell where you doing wrong without me seeing it. but if it shorted, it must be because of both coil terminals touching the body.
ของผมทำเเล้ว ไหม้ตลอดเลย
I would have never bought a vape if I knew it would be such a pain in the ass. Back to cigarettes.
i understand. especially if you deal with cartridge system. that's why i no longer use pods. i only use rba. i only recoil once every other month, and made my own liquid. i don't really care about the flavor as long as i can feel the throat hit like smoking, i'm fine. the only down-side is the size of it. you know, the old school battery mod gear :D
@@jsvpit what is rba?
@@VogtTD rba = rebuildable atomizer.. usually refers to old-style atomizer, which much easier to deal with. its design for diy maintenance. on the other hand, pod style vaping devices, is supposed to disposable type, hence, not easy to do.
You don't need to do all that, just get a new cartridge
Это не работоет
Bruh
beli rbk di mana bang
beli di tokopedia bro. di toko online lain juga pasti ada. cari aja "rbk ursa nano 0.8". ini salah satu link yg jual rbk: tokopedia.link/lcKZ53qFJHb
sori ga langsung jawab. soalnya jarang online. harap maklum.
u,yjk soe
rozjebalem se grzalke, nie polecam
Skill issue, jak regularnie uzupełniasz liquid możesz na jednej lecieć nawet miesiąc
@@czjornymurzyn btw moze jestes w temacie, juz drugi pod zalany i po okolo 3 dniach dyntka i sie pali grzala, normalnie zalany, nie zajezdzam go, moze to kwestia bazy ale huj wie
@@gabdab5649 generalnie liquidy cytrusowe, mentolowe itd mogą sprawiać problemy. Musisz uzupełniać liquid jak masz ok 1/4 w zalaną (dla pewności) dotego po zalaniu odstaw go na jakieś 10 minut. Z innych rzeczy możesz zatkać otwory na powietrze na dole i pare razy mocniej się zaciągnąć. Do tego na podach lepiej jest zaciągać się częściej a krócej (ok. sekundy max na zaciągnięcie). Dotego dobrze jest częściej robić przerwy a za to dłużej trzymać parę w płucach
@@czjornymurzyn doobra, dzieki wielkie sprobuje z nowa grzalka i liquidem ewentualnie to moze byc cos z wyjmowaniem kartdridza podczas ladowania? slyszalem o tym cos
@@gabdab5649 możliwe ale nie jestem pewien
ခေါင်လေးလိခြျင်လို့ဗျာ
sorry, don't understand what you're saying. what language are you speaking? interesting characters you have there 🤔
de.biv jesytess tuylle
I do it but my ursa baby give me a white light