Hi Guys....Just wanted to say thanks for supplying good quality tires. I just ran the S3 1/5 on my E-REVO on 8s i just hit 121mph an set the new world record for the E-REVO and the first to do over 110mph with the 1/5 tires.
@@Aladinscave the best I know for rubber are Grp 1/8 rated at 130 mph. Softer compounds should be used for winters like s1-s3 and s5-s7 for summers. I don’t know the ratings on 1/5 but most probably the same. Same goes for 1/5 softer compounds winter and harder compounds summer. Obviously 1/5 is a bigger tire so more traction but probably will have to sand down the body for them to fit. For top speeds the best are foams always. Best include Bsr, contact, sweep racing. Best of the best imo are bsr. This guy did a vid explaining those just before this one check that out. 👍
So I have a xo1 and I want to install these 1/5 grp tires on it what do you recommend for just everyday street running I want the best of both traction for smooth roads and not so smooth. ???
Hi I usually answer questions sent to our website, sorry for the delay. The S5 will last longer than an S3 or S1, but the S1 and S3 will have better traction. You have to decide which is more important - traction or wear.
Hi Guys....Just wanted to say thanks for supplying good quality tires. I just ran the S3 1/5 on my E-REVO on 8s i just hit 121mph an set the new world record for the E-REVO and the first to do over 110mph with the 1/5 tires.
Nice! What motor and esc you running TP power and mamba xlx2?
Nice video 👍 well explained get a set holding up well so far
Great Information, thanks for sharing
Hey I’m building a new 1:5 chassis can I drift in the hard compound tires? Any thoughts would be appreciated.
Holes in the tires are for dirt, water and moisture to escape as well as to prevent bouncing. It is NOT for ballooning.
Wanting to know would these fit an armma infraction
We have EM Performance adapters to use 5th scale GRP tires. We also carry FOAM tires for 5th scale.
Hi, will these 1/5 tyres be able to handle 150+ mph ? Planning on top speed runs
@@Aladinscave the best I know for rubber are Grp 1/8 rated at 130 mph. Softer compounds should be used for winters like s1-s3 and s5-s7 for summers. I don’t know the ratings on 1/5 but most probably the same. Same goes for 1/5 softer compounds winter and harder compounds summer. Obviously 1/5 is a bigger tire so more traction but probably will have to sand down the body for them to fit.
For top speeds the best are foams always. Best include Bsr, contact, sweep racing. Best of the best imo are bsr. This guy did a vid explaining those just before this one check that out. 👍
@@Aladinscave also lower compounds have more traction but higher wear and higher compounds have less wear but less traction
Is this still true today? Can’t keep 1:5 GRPs together. They blow at 125mph for me.
I want a set of 1/5 wheel adapters that will work on my Losi 8ight truggy. How do I get a set?
Hi will these fit the xmaxx?
Will those tires fit a E Revo 2.0? Any adapters needed? Thanks
What kind of adapter do you have for ARRMA vehicles 1/8 scale
Just Bash It RC sells adapters to square drive.
Nice video! 💪🏽 How i can get those adapters? Interested.
Great info I have some on my talion
Please Provide a lot NJ where to get those square hubs
Hi, Will these bolt right onto a E-revo 86086
So I have a xo1 and I want to install these 1/5 grp tires on it what do you recommend for just everyday street running I want the best of both traction for smooth roads and not so smooth. ???
Hi
I usually answer questions sent to our website, sorry for the delay. The S5 will last longer than an S3 or S1, but the S1 and S3 will have better traction. You have to decide which is more important - traction or wear.
Well said.😎
17mm??
Will these bolt right onto a Typhon 6s? Also what about the talion? Thanks
Hello
No they won't. You would need EM Performance adapters - $59.99 which we have in stock. HobbyHeroes.com
Awesome. Thanks!
@@tomsrbruckner do you guys make the 1/5 scale adaptor for losi 8 truggy
I'm looking for the adapters for a hpi savage , anyone have any insight?
Will these fit the team energy a7x buggy 1/7 scale
5th scale tires use a square hex that is
19mm/.75in
@@tomsrbruckner I know
@@tomsrbruckner thanx sir
What's the diameter of the holes?
I cannot find these Rustler hub adapters anywhere, please help!
emPerformanceProducts.com but you will need to put XO1 axels on the rear unless you want to wait for them to get the Slash adapters back in stock.
F Enix OMG thank you so much! Is it even possible to install XO-1 axles front and back on a Rustler?
Not on the front. They have some axels there that will make it work for the front.
F Enix EM sells them?
E46 G0D EM has the adapters for the slash/rustler in stock. Now you don't even need the xo1 axels