PCM-Tuner repair. these Transistors mounted wrongly by the Manufacturer must be changed !!!
Вставка
- Опубліковано 15 вер 2024
- All the motherboards from this Programmer have a manufacturer's fault, namely the transistors.
Although they know about these problems, the sellers continue to sell them with defects.
This video is an educational one that will help you solve the problem of operation !
Très bon travail 👍 pour aider les abonnés à le réparer. Merci man ta ténu la parole.💪
👍
Vielen Dank 👍
Gerne 👍
one Question: Q3 is on "Frontside" like the N1, N2 and N3, thats ok.
but on other Side you have red rings on Q8, Q9 and Q10, because Q11 is a little bit near on left side (under CB11), and Q8 is K4N Transistor, did you changed the Q8 Transistor to MMBT2222A-7-f ? or did you only Changed Q3, Q9, Q10 and Q11 ???
What are the common faults that occur and you should change the transistor
what issues arises due to this faulty transistor?
yoyo, please question, what is the benefit of this switching transistors? thank you.
.
Hello.
For example edc17cp45 could not be read on Bench and after fixing the problem it works without problems.
Hello guys. I hope I'll get an answer here about my PCMTuner Flash programm. I buy it in February, arrived in April. Three times until now we try to install and use the program, but unsuccesfully. The team from when I buy this program also try to fix it, but nothing until now. This is the problem appears and the PCM tuner flash didn't starts. I hope some of you give me some answers, because I'm dissapointed of all this situation.
@@tinasmilevska1386
you are not using suitable drivers for your version
I just bought one with the transistors the you mention. Do I have to replace them anyway?
If you buy a good quality yes.
Hi guy. I am newbie in this work. Can you give me advice as to which device to choose: SM2 Pro J2354, PCMTuner, CGDI FC200 for reading, writing data and off DTC of ECU?
Thank
Hello.
Original Scanmatik + PCM Flash
When you change all is working well with programmer? Most of these components can fail due to incorrect bench pin selection. People are reporting no change of transistor and working ok. Module 71
Hello master! Help with advice. Kess will read it completely, for e2 MEV 17.4.2 (stone 1767) ?
Hello.
Unfortunately these clones have many shortcomings.
You should use something like scanmatick or FC-200 on bench mode..
@@YOYODiagnostic ok! thanks for your reply!
I replaced the main 2 under the board that effects bench module 71 and now my bench mode works perfect, what do these effect? I have test obd read and bench read and write and so far all good, never been brave enough to write obd as I have genuine tools so not worth the risk.
I have wrote EDC17C10 with tactrix clone with pcm flash 1.20 but only cause file structure matched pcm flash over x17.
Main 2? Could you be more specific?
hello, you mean for GPT function only?
thanks !
Yes, just for bench function module 71, since replacing them mines been rock solid, not had a single issue in the 10+ or so times I've tested
@@killerconsoles517 hey, thanks for Fb, i did resolder 2 of them to 1P (K1P over GPT side), PCM started to work, cool :) thank you!
@@killerconsoles517 one has been shorted, i could measure closed circuit.
Thank you very much ! Wish I never bought this tool! Not worth the headaches, re installing and changing of laptops and O.S . Very poorly made ...support is virtually non existent for this tool, even when it works, always seeing horror stories of bricked ecu's. Lesson learnt!
True ! 👍
Mine I try everything not find usb
Will these transistors fail again even after replacement?
So far I haven't had any problems, but we'll see in a few months of use.
Feedback from someone who uses it daily would be welcome.
Thank you so much for the valuable information !! Where can i get chips website ?
any recommended website
thak
You are welcome. 👍
mouser.com
farnell.com
digikey.com
@@YOYODiagnostic thank you sir, Thank you for your support
@@autoteq299 👍
Great
👍
Hello
I replaced all of them and my tool worked for one job and then stopped obd mode always working , can you help and do you have an email
Also will scanmatik original work with this dongle
Hello when you can fix my pcm tunner please
Hello.
Sorry but I don't make repairs , I don't have time.
So all pcm-tuner's need rework?
Yes.
@@YOYODiagnostic I sent your videos to a friend that is starting a tuning service, one less customer for pcm-tuner's, keep up the excellent work of unbias videos big. Hug
@@tekeraq Thanks. 👍
need rework to open port 2.0 clone?
I will make a video! 👍
Warranty sticker came off, warranty has expired :-D.
👍 :))
Who know about some resistors change ?
Most part are damage
👍