Greetings from Dominican Republic, an advise to those that ask for software, this channel is more to show the reality of some diagnostic tools, mostly the clones , what can do and what can't , so we the mere mortals don't waste our money on trash or brick a module using low quality equipment
Do not ask for Software link because this UA-cam channel does not sell products or software, it is meant to help you with some information. That is, to prevent you from the problems that others have gone through. The first comment received on this video was where is the download link, the answer is simple, the link is found on those who sell programs.
Hello And Thank You for the detailed videos on automotive diagnostics. I purchased a Kess V2 and received aliexpress a few days ago, It bundled with ver 2.80 KSuite . Problem is the CD has NO USA model cars in the software. I can see on your KSuite 2.90 it does have Chevrolet (US) showing... I honestly thought even the clone KESS V2 came with USA cars possibilities. Any ideas. Thanks again
@@YOYODiagnostic , Hi Yoyo,,,I did email you about the new KSuite v 2.90 software...Would like to get something that can be used on North American cars. My unit has not even been used as of now. Don't know how i missed this reply. Thank You
I have never experienced this, in the case of the edc17c60 I made a correction with FC200 and I was surprised that it stopped starting. I rewrote the program without the checksum correction and kept the modified Dump with WinOls and it worked perfectly.
@@YOYODiagnosticI cloned ECU and did immo off. I'm having an issue with a vag med17.1. I do a immo off in eprom and micro and I get a checksum error p106A or I get a memory fault but no safe on the dash. I do a different way for immo off and I get safe on the dash but no checksum error or memory error. Both ways car starts fine. But both ways have separate issues. I don't want to adapt 2nd ECU to other modules because I still need stock unmodified 1st ECU for inspection. Not sure what to do? I'm guessing get a virgin infineon sak tc1796 and copy dump from original ECU on to chip and solder onto second ECU?
Great video chief, I wonder just a question, if i use a clone kess by correcting checksum with winols, can i tune ecu or remove dpf adblue etc. without any problem? Of course I know there is not zero problem even with master tools but i mean can we assume the risks are equal between clone and slave/master if we correct the checksum with winols ? Ty so much for answering.
@@YOYODiagnostic oh ok, actually i don't mean that. removing process is not important for me. i just wonder if i correct the checksum with winols, can i use clone devices safely? (effecting or booming car and ECU). If possible could you read and answer my question except "or remove dpf adblue etc." part please. Thank you so much for your interest
@@borosOuro so let me answer you in detail so that you understand what I meant. You asked me if you can read the ECU with the Kess clone and write a Dump, for example with AdBlue off. I answered that this Clone can't do that because it's too old, if you want a better performing clone get a Kt200v2, or an FC200 that is original. Now to answer your second question, if you cancel DPF or AdBlue and the programmer does not do checksum correction, nothing bad happens with the ECU, only the car will not start, you can fix this problem if. write Dump with the correction made. I hope you understand 👍.
@@YOYODiagnostic Thank you so much sir, I understood. My last question ; Everybody write on forums, you can boom the ecu even with original devices. So your booming rate is higher with clone devices. Is that true? Is clone devices more risky than original devices or booming ecu is a lie, is there always a solution for fixing ecu? It was my last question sir. Thanks.
Hi YOYO, thanks for your video. I have a question, I don't find information about how it is possible to correct the checksum for the EDC17 ECUs. The winols 4 doesn't support (I think), is there any software specific for the checksum correction on the EDC17 ECUs?. Great job.
Was wandering what you think about the master x17mag2pro - now is 1500 euro all protocols and no updates and no fees. Should be no reason to by a kess clone as this would be much better no?
Hello, I have a Honda CRV and I sent my file to be reprogrammed. Would you be so kind as to look at the original and the modified one and tell me if the checksum is correct and if I would have no problem writing it? Thank you very much, I hope your answer
Hello, if you have time and see thus message, i need some help. Starting with programming, alredy doing some locksmith with autel 508s, and mini key tool for start. I need advice what to buy for dpf, egr and adblue. Also for virgin,clone and reprogram ecu. My idea for strat is sm2, kess/ktag, and ktm200, also some godiag adapters. Budget is 1000$. Is that ok or you thinks something else is better. Thanks very much.
Hi, the programmers you mentioned above are part of a different era, rather than buying 4 15 year old clones you better buy one and a good one. If you don't have money to buy something original then turn your attention to KT200v2
Hello. edc17c60 but it wasn't a problem it just didn't work and I had to do the correction manually. FC200 did not work as it should. on this ECU the best is Flex which has never failed.
Hello, I have 2 questions. If anyone can help me I would be very grateful, I bought a kess and I'm a beginner, I'm still learning about it. I have an ed16u34 passat B6 (personal car), I read the map made a stage 1 and a dpf off and made the checksum with ecm titanium. Is the ecm titanium good for stage1? Good for checksum? K-Suite 2.80 make checksum automatically? or need checksum made before writing?
Thanks 👍. I also said in the video that I used WinOls all the time. This video was to show them not to do that. There are many subscribers who are learning to do this for the first time and not to make mistakes like this, we will show them what happens.
It gived me the same error on my e70 x5 edc 16c35,but car started without problem.iade the checksum correction but still giving this error.i think this is just bicous is a clone .but not shure.what you think.?
Did you clone the ECU and do a immo off? I'm kinda having the same issue with a vag med17.1. I do a immo off in eprom and micro and I get a checksum error p106A or I get a memory fault but no safe on the dash. I did a different way for immo off and I get safe on the dash but no checksum error or memory error. Both ways car starts fine. But both ways have their own issues.
The issue you were having with it keep saying turn on and then turn off and doing nothing is due to the fact the battery voltage is too low. I had this exact situation, I connected a charger and voltage went up to over 13v and kess was happy and it read and wrote maps no problem.
Hello. If you listen carefully there is another car running that has the cables connected to the Audi. With a little attention, you can hear the engine starting from the 2nd car while I write the ECU.
@@YOYODiagnostic What? You have the Audi connected to another car and only have 12.5v 🤦🏻♂️🤣 that should be atleast 13.5v and with a good electrical system and good alternator 14v and more.
@@stiggyness1976 You noticed correctly and I had the same question, but I will also give you an answer. I have a video where I compare this clone with MPPS and it doesn't show me the voltage at all but it still works. So if you had 0 Volts it shouldn't start and everything was written successfully. This is the result when we use Clone !
@@YOYODiagnostic hi Yoyo, i have read that connect 2 cars to maintain battery while ecu writing, its a very not good idea, because can happen amperage raise/drop and ecu is bricked immediately. Can you please confirm or deny it? I don't know what to think about it, i did it already like you 3 times, was no problem, but it was written by a trusted tuner on a forum 😮
@@mrt-ee1zn Hello, Every programmer even those clones have voltage regulator. If you're going to watch one of the rework videos made by me, always change those voltage regulators with original ones or with USA or Japan quality ones. If this happens to me at least once, I wouldn't do it again, so I don't believe it until I see it.
is this device still able to read an ECU that is from a model not listed? im talking an older ford eec-v that has j1850pwm protocol... i think it is simlar to the focus of that age 1998-2002 .. . it is a non-european model
@@sejokukuljac211 Ktag clone is too old for 2022, the year we are in, can read ECUs up to 2010. These ECUs are fitted to models up to 2012-2014. after no chance. So on a BMW G series car you have no chance. Instead, if you don't have a lot of money to invest in programmers, buy FC-200 for Bosch or if you want universal, buy Scanmatik and activate the protocols you need in turn. You can do the same if you buy Flex, there is no need to activate the full software for 5000 euros, but you can buy the programmer for 1000 euros and activate only what you need. Of all, I recommend Flex, the best customer service.
@@npnferramentasferramentasd812 unfortunately I don't distribute software, that's not the purpose of this channel. You didn't read the comment I posted. I only help people with Card repair from this device when it has errors and not working.
@@mohbel6515winols 2.24 or winols 4.51 for checksum correction. I was having some random issues with 4.7.7 on checksum and certain features doing funny things.
Hello. Unfortunately some can only do so much. As you noticed imagine how my head feels when I see dozens of emails like this, people don't understand that I'm not selling Software here, I'm trying to show them what works and what doesn't. 👍
Greetings from Dominican Republic, an advise to those that ask for software, this channel is more to show the reality of some diagnostic tools, mostly the clones , what can do and what can't , so we the mere mortals don't waste our money on trash or brick a module using low quality equipment
Thanks for your support. 👍
@@YOYODiagnostic hello what ktag version that can do checksum without a problem
@@YOYODiagnostic can you tell me???
@@YOYODiagnostic where can I get this update from and is there a new sd card update?
I don't understand why this channel don't have more view, great content
Thank you for support !
hi give me link soft plz
where i can find the clone kess v2.90? in Aliexpress there is only 2.80
Hi thanks for this video regarding the checksum correction I always watch your videos and learn a great deal from them thanks again
👍
Do not ask for Software link because this UA-cam channel does not sell products or software, it is meant to help you with some information.
That is, to prevent you from the problems that others have gone through.
The first comment received on this video was where is the download link, the answer is simple, the link is found on those who sell programs.
Never had problems with checksum, not with Kess V2.47 or 2.80.
Also MPPS v18 do a good job there :)
👍
Sur edc17 les problèmes sont là
Great video... I have looked everywhere for the 2.90 version... Just seen previous messages so I removed the obvious question :)
Thank you for your videos, they are very helpful
👍
Onde consigo essa versão do ksuite2.90 caso tenha o link poderia passar e o ecm Titaniun tem alguma versão mais atualizada
Hello And Thank You for the detailed videos on automotive diagnostics. I purchased a Kess V2 and received aliexpress a few days ago, It bundled with ver 2.80 KSuite . Problem is the CD has NO USA model cars in the software. I can see on your KSuite 2.90 it does have Chevrolet (US) showing... I honestly thought even the clone KESS V2 came with USA cars possibilities. Any ideas. Thanks again
Contact me to yoyo.pc86@gmail.com
@@YOYODiagnostic , Hi Yoyo,,,I did email you about the new KSuite v 2.90 software...Would like to get something that can be used on North American cars. My unit has not even been used as of now. Don't know how i missed this reply. Thank You
Do you know any guide how to use Kess and Ktag
Did you use power stabilizer ???
Wieder mal sehr interessante Sache vielen Dank für deine Mühe
Dankeschön 👍
If you correct the checksum in winols for example, will KESS try to make checksum correction over corrected file anyway and make file bad?
I have never experienced this, in the case of the edc17c60 I made a correction with FC200 and I was surprised that it stopped starting. I rewrote the program without the checksum correction and kept the modified Dump with WinOls and it worked perfectly.
Golf gti mk5 2006 has developed following error.
P0601……001…..memory check sum error
MIL-ON
Can it be corrected by this software?
Do you have problems with Checksum and want to use a Clone to solve the problem?
Send the Dump and I'll correct it for you.
@@YOYODiagnostic thanks for your reply. You mean Dump , if I made a back up of ECU & send the file over to you. How to proceed with that? Thanks.,
@@YOYODiagnostic how to proceed with that?
@@YOYODiagnosticI cloned ECU and did immo off. I'm having an issue with a vag med17.1. I do a immo off in eprom and micro and I get a checksum error p106A or I get a memory fault but no safe on the dash. I do a different way for immo off and I get safe on the dash but no checksum error or memory error. Both ways car starts fine. But both ways have separate issues. I don't want to adapt 2nd ECU to other modules because I still need stock unmodified 1st ECU for inspection. Not sure what to do? I'm guessing get a virgin infineon sak tc1796 and copy dump from original ECU on to chip and solder onto second ECU?
@@kendraymason
Which programmer are you using?
The dpf remover on your desktop is good? Working?
Great video chief,
I wonder just a question, if i use a clone kess by correcting checksum with winols, can i tune ecu or remove dpf adblue etc. without any problem? Of course I know there is not zero problem even with master tools but i mean can we assume the risks are equal between clone and slave/master if we correct the checksum with winols ?
Ty so much for answering.
@@borosOuro the care ho has AdBlue are not supported from kess v2 Clone
@@YOYODiagnostic oh ok, actually i don't mean that. removing process is not important for me. i just wonder if i correct the checksum with winols, can i use clone devices safely? (effecting or booming car and ECU). If possible could you read and answer my question except "or remove dpf adblue etc." part please. Thank you so much for your interest
@@borosOuro so let me answer you in detail so that you understand what I meant. You asked me if you can read the ECU with the Kess clone and write a Dump, for example with AdBlue off. I answered that this Clone can't do that because it's too old, if you want a better performing clone get a Kt200v2, or an FC200 that is original. Now to answer your second question, if you cancel DPF or AdBlue and the programmer does not do checksum correction, nothing bad happens with the ECU, only the car will not start, you can fix this problem if. write Dump with the correction made.
I hope you understand 👍.
@@YOYODiagnostic Thank you so much sir, I understood. My last question ; Everybody write on forums, you can boom the ecu even with original devices. So your booming rate is higher with clone devices. Is that true? Is clone devices more risky than original devices or booming ecu is a lie, is there always a solution for fixing ecu? It was my last question sir. Thanks.
I have an EDC16C39, I get "wake up error" while like reading ID. You know how I can resolve? Great content. Subscribed!
Is it possible to update kess v2 clone 2.80 to 2.90?
Hi YOYO, thanks for your video.
I have a question, I don't find information about how it is possible to correct the checksum for the EDC17 ECUs. The winols 4 doesn't support (I think), is there any software specific for the checksum correction on the EDC17 ECUs?.
Great job.
@@SparkMechanic
WinOls is the best for this job
@@YOYODiagnosticThanks
Hello. At what speed do you read and write at VAG?
Audi a6 3.0tdi v6 4f
Ecu:Edc16cp34
I get rsa error and generic error error even when writing the file I read. Urgent help please 😔 Kessv2 clone
Hi. Read on Bench. Use Ktag or another tool. For obd it's better to use Galletto for this ECU. Use Kess only if you have full rework version
Hello.Thanks for video everything clear explained. What a program would you recommend to checksum? Thanks
Hello.
Thanks for watching.
WinOls or ECM Titanium.
Thanks for answer .All best for You💪
If we do checksum with WInOls, can that be enough ?
Yes. WinOls is the best .
Was wandering what you think about the master x17mag2pro - now is 1500 euro all protocols and no updates and no fees. Should be no reason to by a kess clone as this would be much better no?
Hello,
it's at least 3x better than a Kess+ Galletto clone together.
Hello Brother! do you have kess v2 2.90 installation?
Will this version do the continental simos 8.5?
Hello, I have a Honda CRV and I sent my file to be reprogrammed. Would you be so kind as to look at the original and the modified one and tell me if the checksum is correct and if I would have no problem writing it? Thank you very much, I hope your answer
yoyo.pc86@gmail.com
Peace, sir, how can I get this program? Reply, please
Gutes Video,
wo kann ich die Version 2.90 bekommen?
Hello, if you have time and see thus message, i need some help. Starting with programming, alredy doing some locksmith with autel 508s, and mini key tool for start.
I need advice what to buy for dpf, egr and adblue. Also for virgin,clone and reprogram ecu.
My idea for strat is sm2, kess/ktag, and ktm200, also some godiag adapters. Budget is 1000$. Is that ok or you thinks something else is better. Thanks very much.
Hi,
the programmers you mentioned above are part of a different era, rather than buying 4 15 year old clones you better buy one and a good one. If you don't have money to buy something original then turn your attention to KT200v2
@@YOYODiagnostic Do you have experience with KT200 v2?
@@charlychlonson8381
No . I tried it 3-4 times but it is not enough to tell you I have experience with this tool.
Wich Ecu was in your Problem Car with The AdBlue Problem?
Hello.
edc17c60 but it wasn't a problem it just didn't work and I had to do the correction manually. FC200 did not work as it should. on this ECU the best is Flex which has never failed.
where can i download 2.9?
If I understood correctly, we should always check chcksum in another program before writing?
Hello,
If you use a clone ,yes
Hello, I have 2 questions. If anyone can help me I would be very grateful, I bought a kess and I'm a beginner, I'm still learning about it.
I have an ed16u34 passat B6 (personal car), I read the map made a stage 1 and a dpf off and made the checksum with ecm titanium.
Is the ecm titanium good for stage1? Good for checksum?
K-Suite 2.80 make checksum automatically? or need checksum made before writing?
WinOLS is best for checksum correction
excellent video. but why not use winols for checksum correction?
Thanks 👍.
I also said in the video that I used WinOls all the time. This video was to show them not to do that.
There are many subscribers who are learning to do this for the first time and not to make mistakes like this, we will show them what happens.
Can i ask before i buy a clone of theses can this read and write maps for ford transits 2007 to 2022 or what is the last year for obd2 thanks
Hello,
if they have the post to this video I think you mean Kess.
This clone can write cars up to 2008-2010 via OBD.
Hello.Thanks for video everything
👍
It gived me the same error on my e70 x5 edc 16c35,but car started without problem.iade the checksum correction but still giving this error.i think this is just bicous is a clone .but not shure.what you think.?
Did you clone the ECU and do a immo off? I'm kinda having the same issue with a vag med17.1. I do a immo off in eprom and micro and I get a checksum error p106A or I get a memory fault but no safe on the dash. I did a different way for immo off and I get safe on the dash but no checksum error or memory error. Both ways car starts fine. But both ways have their own issues.
The issue you were having with it keep saying turn on and then turn off and doing nothing is due to the fact the battery voltage is too low. I had this exact situation, I connected a charger and voltage went up to over 13v and kess was happy and it read and wrote maps no problem.
Hello.
If you listen carefully there is another car running that has the cables connected to the Audi. With a little attention, you can hear the engine starting from the 2nd car while I write the ECU.
@@YOYODiagnostic What? You have the Audi connected to another car and only have 12.5v 🤦🏻♂️🤣 that should be atleast 13.5v and with a good electrical system and good alternator 14v and more.
@@stiggyness1976
You noticed correctly and I had the same question, but I will also give you an answer. I have a video where I compare this clone with MPPS and it doesn't show me the voltage at all but it still works. So if you had 0 Volts it shouldn't start and everything was written successfully.
This is the result when we use Clone !
@@YOYODiagnostic hi Yoyo, i have read that connect 2 cars to maintain battery while ecu writing, its a very not good idea, because can happen amperage raise/drop and ecu is bricked immediately. Can you please confirm or deny it? I don't know what to think about it, i did it already like you 3 times, was no problem, but it was written by a trusted tuner on a forum 😮
@@mrt-ee1zn
Hello,
Every programmer even those clones have voltage regulator. If you're going to watch one of the rework videos made by me, always change those voltage regulators with original ones or with USA or Japan quality ones. If this happens to me at least once, I wouldn't do it again, so I don't believe it until I see it.
Thanks for the vedio,and please post the link for SD card image.
is this device still able to read an ECU that is from a model not listed? im talking an older ford eec-v that has j1850pwm protocol... i think it is simlar to the focus of that age 1998-2002 .. . it is a non-european model
I don't know.
Better try with Ktag.
Where to download v2.90?
@@cmadinga no download link anymore
Where and how can I download the software? really want to update my Kess clone see if it works… before I buy the PCM tuner
Pcm turner can communicate with edc17 and others. Kess clone works only on edc15 , edc16. This clone does not work on new ecus.
@@YOYODiagnostic thank you 🙏🏻 so I am just best buying the PCM Tuner …. Then see how it goes … looking I can get the PCM tuner on Softwear 2.27
@@YOYODiagnostic but does k tagg do edc17 and odhers, Im going to buy clone now but dont know wich I will buy, what would u rekomend
@@sejokukuljac211
Ktag clone is too old for 2022, the year we are in, can read ECUs up to 2010. These ECUs are fitted to models up to 2012-2014. after no chance. So on a BMW G series car you have no chance. Instead, if you don't have a lot of money to invest in programmers, buy FC-200 for Bosch or if you want universal, buy Scanmatik and activate the protocols you need in turn.
You can do the same if you buy Flex, there is no need to activate the full software for 5000 euros, but you can buy the programmer for 1000 euros and activate only what you need. Of all, I recommend Flex, the best customer service.
hello master! I have ideas for ksuite, it might be interesting, how can I write to you?
what ideias? bro
What program do you use for your checksum ?
OLS
is this version contain the MED 17.4.4
@@bahermsamir this ECU doesn't work with this Clone. Jump to an original product.
Need this file for the clone version of kess v2
Super!!!
Hello pleas get link . Thank you
send me link software please bro...thanks ...
Pls share link for software
No pides casi nada.
tks
👍
@@YOYODiagnostic ...you can send this software version 2.90
@@npnferramentasferramentasd812
unfortunately I don't distribute software, that's not the purpose of this channel. You didn't read the comment I posted.
I only help people with Card repair from this device when it has errors and not working.
Kess 2.90 version read bmw f series ?
The F series cannot work on OBD with these clones.
@@YOYODiagnostic hast du f-Modelle mit ktag schon getestet?
@@shukudo
Hallo.
yes, I tried, it works on F10. F01
Hello, where can we get the download link?
Is that why you are subscribed to the channel to ask for links to programs?
I think you have the wrong location!
@@YOYODiagnostic Hi, I asked if there is a link, it has nothing to do with sharing. I watched a few of your videos and shared them.
@@carplusco 👍
Why kess dont do checksum correction?
This is a Clone. Original is one of the best tuning programmer
@@YOYODiagnostic
and with which program should I make checksum correction? Maybe with winols ?I also have a kess clone
@@mohbel6515winols 2.24 or winols 4.51 for checksum correction. I was having some random issues with 4.7.7 on checksum and certain features doing funny things.
First commentaire
Hello.
Unfortunately some can only do so much. As you noticed imagine how my head feels when I see dozens of emails like this, people don't understand that I'm not selling Software here, I'm trying to show them what works and what doesn't. 👍
Is already known that all versions after 2.47 are craps and fakes.
correct but there are still sellers trying to trick us
If no software link, don’t raise our appetite
Unfortunately I do not have this right.
I am sorry.