Bob has been building all of their motors, aside from the lough ls in the falcon, since the beginning. The one time they stepped out for the big block in the nova, it bit them in the ass. That motor now is also one of bobs builds. But Bob is by no means exclusive to the src crew. The deal bill has alluded to is to build a give away engine, basically identical to what's in bills Malibu.
Bobs a good dude, id happily take all the stress of racing and breaking with a builder who doesn't quit like Bob. I hope his heart has been feeling better. Id give anything to have my garage pops to chill with again.
We built a 377 years ago and it was pretty impressive for a smaller cubic inch engine. That is going to be a pretty healthy small block with over 700 inches of lift and 18 degree heads. Can’t wait to see it run.
Perhaps it's time to start marketing a line of "Billy" small blocks or with the addition of a dyno a "Billy " tune. Love what you guys are doing! I find that Street Race Channel, The Old Man's Garage, Gen 2 Garage, Miss Midnight Maverick, and even Jimmy Dale to be far more entertaining than Street Outlaws. These channels are equally as good as the original 405 show and are far better than any of the current NPK/ Street Outlaws derivatives. These channels are relatable and allow everyone the opportunity enjoy absolutely outstanding content. So a big thank you to these channels for sharing what you do for everyone to enjoy.
Uncle Bob is something special and I know Billy is learning a lot from him. Somebody gotta take over eventually for us old guys. My son and I been going and helping out at a engine shop. It's out in the middle of some farmland. We have a blast and my son is really learning something hands on. It's awesome to see them teach and work at the same time.
Great video glad to see uncle Bob’s looking good motor looks killer. Can’t wait to see you and the S-10 kicking ass and taking names again. Love y’all.
You're really getting after it Billy - I'm impressed how many irons you have in the fire. Very good content, I'm definitely hooked. So many of your projects are race cars I only dream of owning/racing. I enjoy watching you in those vehicles living your best life. Congratulations on your success so far- much more to come.
Should've left the disclaimer out - lettem' think that it's only a 450HP combo NA while the Dime is gapping them, LOL Such a shame that the Trick Flow deal didn't work out, their heads are generally just plain solid, capable pieces(I mean, High Ports and Twisted Wedges are still the go-tos for SBFs, and the A460s are hard to beat for huge power with the BBF), too bad about how these 18s worked out. But I'm still excited to see it staying 18°, those heads with a single plane and 372"(and the appropriate cam), it should be quite the high winding turbo combo! Love those Crower steel rockers too, I don't know why anyone runs anything else if they're available for your platform(wish they offered them for more heads; I need some BBF Crower steel shaft rockers!), affordable and you NEVER have to worry about those things breaking.
Thanks for the update and definitely Thanks for the entertainment,I've said many times you all are a hoot. I'm excited to see the s10 back. God bless and as always be safe.
Can't say how many times we've seen that intro,, the S10 and Protege' pack'n their front wheels as they get it on toward the finish line side by side but it always makes me smile. 🙂 Look'n forward to the truck that made SRC famous AND Tommy's blue S10 be back among the 'ready to race' SRC stable.
Bob`s laugh when Bill said you shifted @6700rpm cracked me up. That valvetrain gave up the ghost cause Billy upped the boost just a bit too much, but hey, it won the Kent trophy. Gave its all, but it will be back with better heads, cam, lifters and valve train to handle Billy and the BOOOOOOOST! 😁 Can`t wait to see the S10`s and the Nova back up and making hits. Stay safe all, God Bless.
Here is a thought, the blue s10 give away truck! 440 with a blow through and a stick shift! Set it up for the stick class, maybe run it a race or two then give away! That would be badass!👍
Thanks Billy for having Engine Builder Bob in your videos! He's old school 🏫 and really cool 😎 👍. Plus, we can tell that he has passion for racing 🏎️ 🐎 🏎️, and will always do his absolute best in his work to make sure his engines defeat your opponents. People like him don't come around often, cool 😎 and wise 🦉!!! Anyway, You ROCK BILLY and Bob's work is appreciated by the fans. Thanks for the video 📸.
BILLY, THE 440ci NEEDS TO GO INTO THE RED ♥️ 🍒 ♥️ NOVA FOR SURE!!! After watching it at the arm drop, it needs that 440 for some serious fun!!! I hope 🤞 🥺 🙏 you and your Dad agree cause it would be awesome to see on the channel!!! Anyway, thanks for the video 📸.
I miss the S10 , I look at the S10 and just think SRC !!! That truck is famous !!!! Oh yeah, Billy tell your Dad he has a brake light out on the driver's side of Vicky's truck !!!! Great video guys , waiting on the next one !!! One more thing , I would love to see T2G pull his S10 to the track with the full size truck he's building then race them both !!!
Thanks for droppin a video so quickly! Plus I see you've been adding the shorts vids as well, good stuff fam! It makes work a little easier when y'all drop!
You're living my dream. I simply love Motors. Worked on engines since I was 15 years old. Too busy in life these days but love watching what you guys do. Thanks bro. Great content. Oh yeah, is that original of Caillou have the cream yellow one you had back in the day? LOL that's when I started watching your videos
Its funny seeing the engine on the dyno with injectors fuel rails and a Carburetor. Cant wait to see the truck back in action, bout to be rippin heads off!
Damn ...talking about a teaser!!!! Great video. You all make these so entertaining.. Cool to hear a chassis dyno is coming to the shop.... can't wait to see the S10 running again..
I bet was Bob was thinking....don’t let billy drive it of the trailer....but at least he gets repeat business. Love what you all do guys it is a pleasure to watch you all.
Thank you again Billy, big rob, Tommie and Bill. You bring a smile to my face and inspire myself and thousands of others. Thank from the bottom of my bow tie heart and come visit Las Vegas. Sean McEntire from Las Vegas Nevada. Take care
loving the machine shop update videos. i am a machinist i bore and darton sleeve blocks. boring out a honda d16y8 with darton mid sleeves right now while watching.
Yes sir,the good stuff!!!! Every thing sounds great 440 Malibu. Tommy’s 5.3 will have its hands full. But the s10 and the falcon Tommy will go fast. Turbo Allison’s 340 before the hemi
Man I just love what you guys are doin!!! I know there's still a lot of ....behind the camera ..... or life happenes.... but it makes my day to see this family now...an from where you guys started.... nice job guys!!
The racing world is so jealous of you guys. You have almost your own machine shop. Most of us are waiting months for engine work to be done. You have 4 projects being worked on at the same time. I've been waiting a full year for my heads to be worked on. I still don't have them back.
Damn I can’t wait for that next video, I love that S-10 and honestly it’s my favorite from your stable. It’s absolutely what’s been missing from these tracks all over Ohio this summer. I really hope it stays together and runs strong and get that thing back in the winners circle again.
Congratulations Billy on getting the motor up and going for the s10, it really hasn't been out racing with all the new frontend work, paint, new motor and all the things you done with it..i hope that thing works out this time around
Love seeing Uncle Bob up working doing good, feeling good and laughing. I'd say the truck would've showed out better at Combs, it's better setup for that kind of race. Tell ya what now, you better watch out for old Byron, he's gonna be head hunting LMBO Great people EVERYWHERE💯
Would love to spend a day with Uncle Bob and just learn from him. I have never messed with the inside of an engine and man it would be fun to learn from him.
Billy that was excellent . Mr. Bacon please bring all your kit. Shenanigans will abound! Billy you are one of the best! Smooth on the Company call out. You have become your father but your too young to know it yet, and really appreciate it but you will. Billy and Tommy you guys will become the old Sage's. Thats how it works. The Old man , he's actually a young person. Im old but I'm trying out combo's.
Idk who would say y'all suck 480hp on motor when it's built for boost out of 372 inch small block is plenty impressive. Glad to see everything starting to come back together keep up the good work SRC
I love everything y'all do. But the end of that video with the ole S-10 and the engine hoist with motor. Man that just feels right. That right there is SRC!
That laugh from uncle Bob just can't make it's way on to a t-shirt let alone Billy's reaction to the shift point. Nonchalant casual talk about a death of a motor that should have given everything up ! ! 😆. BUT IT LIVES !
Love you guys! Yall gotta get with your cam guy, and let him pick out some lobes stable at high rpm if you stay hyd roller. The "high intensity/high lift-short duration" cam "street" lobes will only break more valve train parts. Target cam lobes that are super rpm friendly, and make the power with more boost and reliability
I like watching your videos you guys are awesome people and I put that engine that was in your dad's nova in the new s-10 give way truck and your engine for your s-10 sounds Sweet and can't wait to see it run and can wait to see Tommy get his trucks up and running and good luck and be safe and God bless you guys
This wasn’t your best year Billy, but you have tested all of the engines to see what it takes to brake them all lol. Bob has got to love you for all the scraps you brought back to him to fix 😂😂 It’s going to be absolutely amazing to see all of the cars on the tracks next year.
18 degree motor strange torque. Like an old 283 or 289 got some runaway rpm . Very zippy . Tuning made fun? Very inretesting!! Lot of air moving through. Small block that sounds like a big block so kool!! Can't wait!
Super excited to see the S10 back in action... after all the best parts and the families hard work we've yet to see it get to doing what it was built for.. the falcon better watch out because The Kid and the S10 are back
Bob's cackle when Bill asks about Jr shifting @6700 made my day. 😆
SAME! Man, I watched that part like 6 times. 😂😂😂
I love hearing Bob laugh in the background. Every time he see's you pull up he must think 'job security'. lol
I'm pretty sure they got something going on We have no idea about.
This made me Laugh out loud :)
Cha' Ching !! Says Bob !! Thank God for SRC and Old Man's Garage !!
@@neilstuart9727 yea seems Bob is doing a lot of their engines right now. I thought Ole man had talked to Bob about something exclusive at one time.
Bob has been building all of their motors, aside from the lough ls in the falcon, since the beginning. The one time they stepped out for the big block in the nova, it bit them in the ass. That motor now is also one of bobs builds. But Bob is by no means exclusive to the src crew. The deal bill has alluded to is to build a give away engine, basically identical to what's in bills Malibu.
Uncle Bob takes such great care of Y’all and always cool as hell.
The engine sounded really good on the dyno, Uncle Bob knows his stuff!!
Perfect time for a SRC video and kick back. And ready for the Killer S-10's to come back.
Both S10’s !!! We need Tommys S10 back on the road !!
I wish that this could be a daily series because i swear id pay to watch episodes every day. Love the content guys keep it up
Bobs a good dude, id happily take all the stress of racing and breaking with a builder who doesn't quit like Bob. I hope his heart has been feeling better. Id give anything to have my garage pops to chill with again.
We built a 377 years ago and it was pretty impressive for a smaller cubic inch engine. That is going to be a pretty healthy small block with over 700 inches of lift and 18 degree heads. Can’t wait to see it run.
Perhaps it's time to start marketing a line of "Billy" small blocks or with the addition of a dyno a "Billy " tune. Love what you guys are doing! I find that Street Race Channel, The Old Man's Garage, Gen 2 Garage, Miss Midnight Maverick, and even Jimmy Dale to be far more entertaining than Street Outlaws. These channels are equally as good as the original 405 show and are far better than any of the current NPK/ Street Outlaws derivatives. These channels are relatable and allow everyone the opportunity enjoy absolutely outstanding content. So a big thank you to these channels for sharing what you do for everyone to enjoy.
Thank you
The cliff hanger at the end was perfect. Yall got a whole fleet of badass rides and as all ways great stuff
I wish I lived closer. I would absolutely be in your circle, with car culture, racing, fun and family! Glad to see a new video. Y'all are killing it
Uncle Bob is something special and I know Billy is learning a lot from him. Somebody gotta take over eventually for us old guys. My son and I been going and helping out at a engine shop. It's out in the middle of some farmland. We have a blast and my son is really learning something hands on. It's awesome to see them teach and work at the same time.
@joecameron3406 that's awesome. What it's all about!
With the new shop going up you guys will really be pumping out a bunch of great content. Can't wait for next video SRC
Heck yeah! Bob is so cool, can’t wait to see the S 10 making some steam
It was a hoot hearing ol' Byron Bacon talking to you guys!
Hopefully he shows up lol
Great video glad to see uncle Bob’s looking good motor looks killer. Can’t wait to see you and the S-10 kicking ass and taking names again. Love y’all.
You're really getting after it Billy - I'm impressed how many irons you have in the fire. Very good content, I'm definitely hooked. So many of your projects are race cars I only dream of owning/racing. I enjoy watching you in those vehicles living your best life. Congratulations on your success so far- much more to come.
The G.O.A.T!!! Been missing that S-10!!! Can't wait for the next video drop!!
Should've left the disclaimer out - lettem' think that it's only a 450HP combo NA while the Dime is gapping them, LOL
Such a shame that the Trick Flow deal didn't work out, their heads are generally just plain solid, capable pieces(I mean, High Ports and Twisted Wedges are still the go-tos for SBFs, and the A460s are hard to beat for huge power with the BBF), too bad about how these 18s worked out. But I'm still excited to see it staying 18°, those heads with a single plane and 372"(and the appropriate cam), it should be quite the high winding turbo combo! Love those Crower steel rockers too, I don't know why anyone runs anything else if they're available for your platform(wish they offered them for more heads; I need some BBF Crower steel shaft rockers!), affordable and you NEVER have to worry about those things breaking.
Thanks for the update and definitely Thanks for the entertainment,I've said many times you all are a hoot. I'm excited to see the s10 back. God bless and as always be safe.
Ooh man the beast is back.... the one and only billy the kid S10 can't wait to see it racing again
Ohh im so so stoked to see the s10 getting dialed in on the new setup..i forget its efi and a complete new build now .... should be dumb fast 💪
Can't say how many times we've seen that intro,, the S10 and Protege' pack'n their front wheels as they get it on toward the finish line side by side but it always makes me smile. 🙂 Look'n forward to the truck that made SRC famous AND Tommy's blue S10 be back among the 'ready to race' SRC stable.
Bob`s laugh when Bill said you shifted @6700rpm cracked me up. That valvetrain gave up the ghost cause Billy upped the boost just a bit too much, but hey, it won the Kent trophy. Gave its all, but it will be back with better heads, cam, lifters and valve train to handle Billy and the BOOOOOOOST! 😁 Can`t wait to see the S10`s and the Nova back up and making hits. Stay safe all, God Bless.
I'm here for the comments and good vibes only.
Awesome! Can't wait to see that thing back in action!!! That's where it all started
Here is a thought, the blue s10 give away truck! 440 with a blow through and a stick shift! Set it up for the stick class, maybe run it a race or two then give away! That would be badass!👍
Thanks Billy for having Engine Builder Bob in your videos! He's old school 🏫 and really cool 😎 👍. Plus, we can tell that he has passion for racing 🏎️ 🐎 🏎️, and will always do his absolute best in his work to make sure his engines defeat your opponents. People like him don't come around often, cool 😎 and wise 🦉!!! Anyway, You ROCK BILLY and Bob's work is appreciated by the fans. Thanks for the video 📸.
It's great to see the S10 coming back soon, we have all missed it. Let the good times roll.
Keeping mcvay in business one scattered small block at a time 😂😂
Looks like they’re almost single handedly keeping him busy
@@RAMOakleyRN i wish that was the truth. 🤣
They've said that Uncle Bob is wanting to slow down and just focus on the performance side of things rather than rebuilding any engine brought in
@@bendaves77 this is true. The ding from my bank on my phone. Saying a check was cashed reminds me Everytime. 🤣
BILLY, THE 440ci NEEDS TO GO INTO THE RED ♥️ 🍒 ♥️ NOVA FOR SURE!!! After watching it at the arm drop, it needs that 440 for some serious fun!!! I hope 🤞 🥺 🙏 you and your Dad agree cause it would be awesome to see on the channel!!! Anyway, thanks for the video 📸.
I miss the S10 , I look at the S10 and just think SRC !!! That truck is famous !!!! Oh yeah, Billy tell your Dad he has a brake light out on the driver's side of Vicky's truck !!!! Great video guys , waiting on the next one !!! One more thing , I would love to see T2G pull his S10 to the track with the full size truck he's building then race them both !!!
Thanks for droppin a video so quickly! Plus I see you've been adding the shorts vids as well, good stuff fam! It makes work a little easier when y'all drop!
You're living my dream. I simply love Motors. Worked on engines since I was 15 years old. Too busy in life these days but love watching what you guys do. Thanks bro. Great content. Oh yeah, is that original of Caillou have the cream yellow one you had back in the day? LOL that's when I started watching your videos
Love this one. Hearing Billy and Tommy cut up with uncle Bob made me laugh.
Seen the notification! Ole Cleetus is going to have to wait!
It makes some rowdy numbers is all I'll say. Just finished it a few minutes before this video.
I was just finishing up the cleet video when Billy posted.
Had to go Cleet first this time - it's hard to beat a turbo Godzilla with a Lenco lmao
@@RyTrapp0 you aren’t wrong about that
Its funny seeing the engine on the dyno with injectors fuel rails and a Carburetor. Cant wait to see the truck back in action, bout to be rippin heads off!
SRC needs to add a "SRC" wing to Uncle Bob's shop.
Damn ...talking about a teaser!!!! Great video. You all make these so entertaining.. Cool to hear a chassis dyno is coming to the shop.... can't wait to see the S10 running again..
I bet was Bob was thinking....don’t let billy drive it of the trailer....but at least he gets repeat business. Love what you all do guys it is a pleasure to watch you all.
Thank you again Billy, big rob, Tommie and Bill. You bring a smile to my face and inspire myself and thousands of others. Thank from the bottom of my bow tie heart and come visit Las Vegas. Sean McEntire from Las Vegas Nevada. Take care
loving the machine shop update videos. i am a machinist i bore and darton sleeve blocks. boring out a honda d16y8 with darton mid sleeves right now while watching.
That’s what I’m talking about S-10 is alive again LETS GOOOOOOOOO!!!!! GOD BLESS YOU AND YOUR FAMILY!!!!! ✌🏻from Ga.
Hopefully this motor runs really well on boost!
We had a lot of Fun racing at Brown County .. My youngest is working on a s 10. Carrying on the Tradition ))
Must be wonderful to have a dedicated machine shop, it takes 2 months to get a valve job done around here.
Yes sir,the good stuff!!!! Every thing sounds great 440 Malibu. Tommy’s 5.3 will have its hands full. But the s10 and the falcon Tommy will go fast. Turbo Allison’s 340 before the hemi
Can’t wait to see some videos of you making some hits in the S10 again. Us fans miss it for sure!!
Man I just love what you guys are doin!!! I know there's still a lot of ....behind the camera ..... or life happenes.... but it makes my day to see this family now...an from where you guys started.... nice job guys!!
U all are great team. Thank u for content and good times.
Was waiting for Tommy to say “you should’ve put a LS in it!”
I love these.videos as much as when you guys go racing. Excited to see the s10 back
They quality of your videos is top notch. We learn a lot from the SRC family videos.
S10 got me here long ago ready to see her do her thang
That's one fine engine you have young man. That's going to be a Beast.
The racing world is so jealous of you guys. You have almost your own machine shop. Most of us are waiting months for engine work to be done. You have 4 projects being worked on at the same time. I've been waiting a full year for my heads to be worked on. I still don't have them back.
Need to move uncle Bobby M and set him up in the new building and build him a granny flat lol
Then its a complete family
It’s been only one engine for me lol. 2 years next month waiting on a 383
Why so long on one engine?
@@jeffreyeaton9934
Badass videos!!! Always waiting for the next one. Time to get the S10 back in action!!
This might be my favorite video! Bob laughing in the background got me. Lol
And whats up Byron Bacon!
Byron Bacon sounds like a cool dude! I would love to see him in a video!
Got a feelin we will see Ol’ Byron someday in the near future!
Anyone know if Byron has run yet? 😂
Damn I can’t wait for that next video, I love that S-10 and honestly it’s my favorite from your stable. It’s absolutely what’s been missing from these tracks all over Ohio this summer. I really hope it stays together and runs strong and get that thing back in the winners circle again.
Love everything you guys do. I really enjoy the Foxbody stuff you guys do. Thanks for the video!
Glad to see the S-10 coming back!!
Bobs evil laugh at 9:05 🤣🤣🎯🎯
Nice nice billy can’t wait , I like the nova ok , but the OG s10 is what I’m here for 🫶🏻 . Best wishes bro , let’s tear up some roads , chris
Congratulations Billy on getting the motor up and going for the s10, it really hasn't been out racing with all the new frontend work, paint, new motor and all the things you done with it..i hope that thing works out this time around
Love seeing Uncle Bob up working doing good, feeling good and laughing. I'd say the truck would've showed out better at Combs, it's better setup for that kind of race. Tell ya what now, you better watch out for old Byron, he's gonna be head hunting LMBO Great people EVERYWHERE💯
My son is a big fan now I'm a fan we doing same here in Maryland son has 84s10 putting in twins to try to keep up injoy watching you guys 💪
Awesome fellas
Billy is learning a lot
Bob's laugh when Billy says "thanks for calling the SRC hotline!"😂
Would love to spend a day with Uncle Bob and just learn from him. I have never messed with the inside of an engine and man it would be fun to learn from him.
I fucking love bob. He seems like a good guy.
Sweet to see the heart breaker coming up again. Nice heads, plenty of power to be found, haters are lining up and don’t know it yet
Billy that was excellent . Mr. Bacon please bring all your kit. Shenanigans will abound!
Billy you are one of the best! Smooth on the Company call out. You have become your father but your too young to know it yet, and really appreciate it but you will. Billy and Tommy you guys will become the old Sage's. Thats how it works. The Old man , he's actually a young person. Im old but I'm trying out combo's.
Kool - Byron bacon. That would be another cool video for y’all. If he shows up at your door❤
Idk who would say y'all suck 480hp on motor when it's built for boost out of 372 inch small block is plenty impressive. Glad to see everything starting to come back together keep up the good work SRC
I love everything y'all do. But the end of that video with the ole S-10 and the engine hoist with motor. Man that just feels right. That right there is SRC!
Man I can’t wait to see both your S-10’s going again. Love those trucks.
Great to see the truck coming back. 👍
Hell ya I can’t wait to see both S-10 up and running again
That laugh from uncle Bob just can't make it's way on to a t-shirt let alone Billy's reaction to the shift point. Nonchalant casual talk about a death of a motor that should have given everything up ! ! 😆. BUT IT LIVES !
bobs advice........ dont turn a over the counter crate engine 6700 plus add boost .lol
I'm a big fan of your S-10...this is great to see!
Fun video to watch. Can't wait for both S-10s to be on the trailer headed to the tracks.
Good job Billy that shift point is one way to tear it up
Glad to see the s10 is almost back out it going to hurt some feelings 🫡put the 440 in your dads nova 💪
Shout out to Bryon Bacon , he sounds like a cool dude.
I have been waiting for the S10 Come back The high winding 372 is gonna be the best motor yet Can't wait to hear it with those turbo spooling
Uncle Bob's a hoot! You guy's need to do a podcast with him
Love you guys! Yall gotta get with your cam guy, and let him pick out some lobes stable at high rpm if you stay hyd roller. The "high intensity/high lift-short duration" cam "street" lobes will only break more valve train parts. Target cam lobes that are super rpm friendly, and make the power with more boost and reliability
I can't WAIT!! I LOVE THAT TRUCK!!!
Can’t wait to see the s-10 putting in work
great vid as always , glad to see a shorter vid , i dont always have time to sit and watch the longer ones.
You know you all and your dad can upload everyday and I would watch it love It
I like watching your videos you guys are awesome people and I put that engine that was in your dad's nova in the new s-10 give way truck and your engine for your s-10 sounds Sweet and can't wait to see it run and can wait to see Tommy get his trucks up and running and good luck and be safe and God bless you guys
It would be awesome to get to hang around Bobs shop and just learn all you can. He’s definitely a great machinist.
This wasn’t your best year Billy, but you have tested all of the engines to see what it takes to brake them all lol. Bob has got to love you for all the scraps you brought back to him to fix 😂😂
It’s going to be absolutely amazing to see all of the cars on the tracks next year.
18 degree motor strange torque. Like an old 283 or 289 got some runaway rpm . Very zippy . Tuning made fun? Very inretesting!! Lot of air moving through. Small block that sounds like a big block so kool!! Can't wait!
Super excited to see the S10 back in action... after all the best parts and the families hard work we've yet to see it get to doing what it was built for.. the falcon better watch out because The Kid and the S10 are back
You have got quite an engine there
Cool to see all the SRC project engines at bobs