Clean and Recoat

Michael Purser takes you on a job site to see Clean and Recoat in action where it's clear to see why homeowners are focusing on this option to bring their wood floors back to life without the need for heavy sanding.
Video Production by David Hinshaw

[@trumanhardwoodfloorservices]

I would love to learn from you, great video sir

[@lookoutforchris]

Solid info, helped me decide what to do with my floors.

[@alsepu80]

Great video!

[@johnhouli3450]

Thank you Sir, I’m thinking about redoing my living room floor with water base polyurethane but first I have to clean all the old oil base polyurethane most of it is off in walking area. Underneath couch and Table and chairs in fair condition but I’m assuming I need to remove the top coat of polyurethane and for that I believe I need to use the screen.

[@johnhouli3450]

Michael so I have watched your video a few times, so the Maroon pad as you said is to be used to clean with IFT solution and the Maroon Pad. I understand that. After the floor dries do I then take the screen to remove the old finish and then vacuum and then used the squeaky clean to neutralize the ph on floor from IFT. Then after it’s all picked up with vacuum then apply the Bona Mega.

[@patrickdaiglefloors]

Hi can you tell what products you recommend to clean the floor. I see you are buffing on top of it. Is mega finsh still what you use to recoat

[@johnhouli3450]

Michael I understand what you say. I have seen many videos of guy’s cleaning the floors with the synthetic pads but after that is done then they remove the top finish on the floors so the stain or the urethane can adhere to the floor. You don’t mention that when you talk. Unless I misunderstood your explanation.

[@stephenmartinez583]

Thank you for this video! What is the name of the cleaning pad you use? You said synthetic pad; I searched and it doesn’t come up in my results. Thank you!

[@adamhall5024]

Been doing wood floors for 30 years, no doubt it’s an affordable option versus sanding, but a professional can always spot one of these floors, makes floor finish look thick, and typically the topcoat never adheres in spots and leads to the finish cracking or air pockets are created. I stay away from this process, too many problems come from this process. Still enjoy your videos

[@clintonhoffmann9626]

Do you clean with a dry pad, or should you use a wet method?

[@zafferhead]

Hello. Do you use a polyurethane type coating? If so, what brand?

[@TheBandoury]

I want to make my floor very shiny that if pet had an accident(peed) it would not stain the floor, what kind of coating do you recommend? thanks

[@richardrivera9061]

What’s the process to white wash

[@jeffreycaldwell8836]

Did you use the maroon pad dry after you Cleaned