Finally Assembling the tall gears into this bike putting it all back together after one week of patients and battles all to just have one last problem, Almost, almost there
Ive been there to many times lol so many times i literary hate making gaskets and changing berrings Lol. AND IVE HAD TO HAVE MY GEARS PRESSED AS WELL LOL GREAT JOB I FEEL YOUR ANGER AND RAGE IVE NOT RIDDEN EITHER OF MY BIKES OUTSIDE OF MAYBE A MILE THEN PUSHED IT HOME MY BIG BIKE KYMCO IS BLOWN UP I HAVE THE NEW KIT HOPEFULLY PUTTING IT IN SUNDAY
Aww man Sorry to hear that I thought you just put a new top end in that thing Or it was the old one still either way yeah that sucks The gasket took a very long time but I needed to be done this was supposed to be a three hour one day job two weeks ago and look at what it has turned into lol But we will get it done as always and it’ll be worth it
Takes forever though I didn’t know I have a stock bearing until this point it worked. Hopefully I don’t run into this again that was a pain. I never wanna do that again but at least we got it done.
Aye bruh jus grabbed 1 off the market place for 70 and if I put starter fluid in it. It start up rev high then cut off. Then I cover the hole where the air box go it idle a lil then try to give throttle no response then dies any suggestions I clean the carb have spark I'm thinking the carb jus bad what u think?
There are so many issues that could happen Power, spark, air, fuel Start with the battery then see if it has spark make sure that there are no air leaks and make sure that it is getting fuel with everything cleaned out Clean everything out clean the tank clean the carburetor, fresh plug, fresh battery and make sure nothing is blocking or missing from the intake system Process of elimination brother Im about to do the same thing with a third bike we’re getting Sunday, you’ll see it up on here Sunday And waiting On a gasket in the mail for this white bike STILL
@@davidhofinger4927 yup has spark fina replace battery fina go thru the tank and carb again to make sure jets ain't clogged yup I'll b waiting on yo upload bruh links to where u get your stuff so I can go thru the same site since we got the same moped and appreciate the response 💯💪🏾
You did great i didnt get to ride but greatful you got your og bike what i would do to have my junk yard dog back man most reliable bike i ever had
Ive been there to many times lol so many times i literary hate making gaskets and changing berrings Lol. AND IVE HAD TO HAVE MY GEARS PRESSED AS WELL LOL GREAT JOB I FEEL YOUR ANGER AND RAGE IVE NOT RIDDEN EITHER OF MY BIKES OUTSIDE OF MAYBE A MILE THEN PUSHED IT HOME MY BIG BIKE KYMCO IS BLOWN UP I HAVE THE NEW KIT HOPEFULLY PUTTING IT IN SUNDAY
Aww man Sorry to hear that I thought you just put a new top end in that thing
Or it was the old one still either way yeah that sucks
The gasket took a very long time but I needed to be done this was supposed to be a three hour one day job two weeks ago and look at what it has turned into lol But we will get it done as always and it’ll be worth it
⭐️⭐️⭐️⭐️⭐️
💯 💯 💯
It does look like venomo
Stop using dry eyes just stick your the bearing inside your refrigerator for 24 hours for a deep freezer for 24 hours straight down the bearing😊
Takes forever though
I didn’t know I have a stock bearing until this point it worked. Hopefully I don’t run into this again that was a pain. I never wanna do that again but at least we got it done.
Aye bruh jus grabbed 1 off the market place for 70 and if I put starter fluid in it. It start up rev high then cut off. Then I cover the hole where the air box go it idle a lil then try to give throttle no response then dies any suggestions I clean the carb have spark I'm thinking the carb jus bad what u think?
There are so many issues that could happen
Power, spark, air, fuel
Start with the battery then see if it has spark make sure that there are no air leaks and make sure that it is getting fuel with everything cleaned out
Clean everything out clean the tank clean the carburetor, fresh plug, fresh battery and make sure nothing is blocking or missing from the intake system
Process of elimination brother
Im about to do the same thing with a third bike we’re getting Sunday, you’ll see it up on here Sunday
And waiting On a gasket in the mail for this white bike STILL
@@davidhofinger4927 yup has spark fina replace battery fina go thru the tank and carb again to make sure jets ain't clogged yup I'll b waiting on yo upload bruh links to where u get your stuff so I can go thru the same site since we got the same moped and appreciate the response 💯💪🏾
@@GrowDatSolja scootertuning.ca
Or
Partsforscooters.com
I use both of those websites for my Vento They have everything You could possibly need
@@davidhofinger4927 say less good looking 💯
The aggravation bro😩
This was supposed to be a three hour job two weeks ago 😑
And Dave was closed at the shop today so tomorrow will get those gears pressed
@@davidhofinger4927 I've always used grey silicone gasket maker and it's never failed me