XK K110S Worlds Most Durable Mini 3D RC Helicopter is Back
Вставка
- Опубліковано 5 бер 2022
- Welcome to complete flight testing review of long awaited XK K110S mini 3D RC helicopter. XK K110S is equipped with 6 axis gyro and a 3D Gyro that makes it an absolutely beginners friendly easy to fly RC Helicopter in 6G mode and provides even better and more locked in 3D aerobatics flight performance for intermediate to advanced pilots. With new brushless motor and parts improvement, its now even better than before. With a 3.7volts battery it offers plenty of flight time as well. Not just that, XK K110S is most durable Mini 3D RC helicopter. Crash it without worries, its built durable with durable gear and parts that it just keeps flying even after many crashes. If you are looking for a durable and beginner friendly mini 3D RC helicopter for fun or learning to fly, XK K110S makes a superb choice.
Like my Work, Buy Me a Coffee: bit.ly/alicoffee
Join Channel: bit.ly/joinalishanmaoyt
New RC Helicopters: bit.ly/3Vn2CbI
Best RC Transmitters: bit.ly/3p6ibJD
My 3D models: bit.ly/2H3pxDH
My Social Media: alishanmao.bio.link
My BMC Store: bit.ly/alisbmcstore
Best RC Helicopters:
FW450 V3: bit.ly/3YT8qeF
Airwolf Shell: bit.ly/3kinLXt
Huey UH-1: bit.ly/3ugxzT2
Bell 206: bit.ly/3HCnVl4
Black hawk UH60: bit.ly/3TmnyxC
Sea Hawk: bit.ly/3G1KmQx
Helicopters Spare Parts:
Huey UH-1: bit.ly/3SpmfPB
FW450L: bit.ly/3m4GOVm
F09S Seahawk: bit.ly/3lYgAUD
Bell 206: bit.ly/3INPDw0
FW200: bit.ly/3xPcAZn
My UA-cam Channels:
AliShanMao Channel: bit.ly/alishanmaoyt
Gaming Channel: tiny.cc/5s78tz
DIY Woodworking TV: tiny.cc/b4bbtz
Disclaimer: The links to products provided in my video descriptions are my affiliate links. If you order products using those links, there will be no price increase, but I will receive a certain commission on each sales from those links in this description. This commission income supports my family and help me continue to run and manage my youtube channel.
#Helicopter #XK #k110s #3D - Наука та технологія
My k110 was what got me through the early difficult days! What a great copter it was. K110 always had a brushless main motor and brushed tail. K100 had the brushed tail and main
yup watched my old video :) to find out it had brushless motor too
Just ordered mine on Amazon. I fly helicopters on games all the time. Can't wait to take this thing to the park. I see myself buying a serious RC helicopter in the future. I have mad flying skills.
good and have fun
Many thanks for such helpful video. What I like about your videos/channel that not only these are informative but you are also very responsive to answer questions. Thanks man, keep it up
You are most welcome. join my supporters group if you like: www.buymeacoffee.com/alishanmao
Been watching and loving your videos for years man. Pace and love from Chicago✌🏻
Awesome! Thank you! appreciate it buddy
The 4 pin canopy mount comes from their 120 Shuttle , the previous 110 White canopy i believe used only 2 post but id have to check mines to comfirm it. They are micro tanks & a joy to Fly them. The x6 is a good , easy programmable tx.that get more use around here, than my TK6 & about the best tx in RTF price range. Good Flight , Amigo, lets hope they have kept the old name, because they are really a Blast. Its a Winner.
it sure is, in 2 flights (2nd flight coming soon) i gave it more 3D and 3 more crashes but this thing keeps on flying. they did keep up with the tradition
Everybody I know that owns the K110 knows it is bullet proof... even though I broke mine a few times. I have a few of the K110's and they all have 4 post canopy mounts. Going to have to try out the new K110S.
Mine's on order! Can't wait!
have fun
Well, I got it and yes, it's a great little flyer. I have had some issues with it though. Twice, the man rotor just suddenly came apart during flight. It turned out that one of the tiny screws holding the blades on had sheared off. I didn't crash it, it happened in mid flight. I fixed it with a new axle and screws, flew it, and then it happened again! this time the screw had worked itself loose, they're very short. I replaced the screws with longer ones and put Loctite on them. Problem solved. The other thing is the tail rotor, I've lost two of them now. The hole to fit it onto the axle is too tight, causing the rotor to split and fall off. I'm going to make it a little bigger and then fit the rotor with glue. Wish me luck! Apart from that, brilliant copter! I'm still learning to fly it 'scale', 3D is still too much for me. But that's ok, I'm very patient and I enjoy the learning process.@@alishanmao
Thank you for this video. I have buy a new my k110 s and is so cool. I very happy.
you are welcome
Nice video sir..support
Stay connected
Great video. I've got the 110. I crashed it in my pond twice. It worked after the first splash. They sink really quick 👍 as a heads up to all.. Still worked after second splash, but wouldn't lift to high off the ground. Maybe only battery output issue, not sure. But, my 110 arrived today 👍👍 not tried the 3D mode yet, still learning 😂😂👍👍👍
Thanks for the info!
The Blast K110 did have a brushless motor.
They are almost the same. Only difference is metal Gear servo's. For that also slightly different frame and a different color body.
And it is still an amazing helicopter....😃
I own both of them
these are really good
Thanks for that note! Can you tell me if most other parts are the same on both versions? :)
Can i use k110s servos on k110? K110 servos can break frequently and i am tired of buying new ones, if k110s ones are metal so they are more durable right?
There is an upgrade set you can buy.
Frame is a bit different so 110s servo won't fit the 110. It will fit only with upgraded frame and anti rotation bracket
Assalamualaikum.... Nice brother🙏
Many many thanks
Just ordered one to replace my broken v911 that iv had for years
awesome. have fun
Hi is this from wiltoys the xk k110s or? Great video’s you make love it
Yes it is
This heli matches the size of my hobby budget, small.
Get one
Very cool video! Thanks!! I have a XK110 (original) and I like this new XK110S a lot! I just bought a bunch of parts for the older K110, so can anyone tell me if the parts are interchangeable? Someone mentioned that the main frame is a bit different. Thanks for you time and effort!!! I watch all of your stuff!!
Hello k110 upgraded parts to k110s is 2G servo motors,main frame servo holder and main head cover (canopy)
maybe its time we start 3D printing these parts. I am thinking to 3D print scaled fuselage for these mini helis
@@alishanmao I think it's better
@@suji99hettiarachchi OMG, THANKS! The single most important information and I haven't seen a single reviewer state this on YT. Can you tell me where did you get this info?
@@cezannealves6926 hello I have a k110s helicopter
Funny you compare the old and the new k110 since you don’t remember it was brushless already… 😅😅
Still a good review though… cheers😎😎😎, the demonstration is amazing…
getting old man, getting old, i forget things
@@alishanmao I can definitely relate bro!! Still love your videos!!
Very nice, are they going to sell a bnf/rtf FPV model? I'm also trying to standardise on crossfire and elrs or d8 so it'd be nice if they sold these with different options. Seems like a runcam nano or phoenix 2 nano with a 500mw racing vtx would add a lot to this helicopter, thanks for promoting 3d heli's!
welcome and thanks for comment. but 3D helis are fun to perform aerobatics and stunts. not everything FPV will give you fun. I used to think to FPV everything and then finally realize, things are built the way they can bring you more fun if you not FPV them :D
@@alishanmao Thanks for the reply, and I am looking forward to seeing you bind the heli to a ts16s - I use a radiomaster as well so it's very helpful to see content regarding binding and general use with the tx16s :)
G'day from Australia!
@@bobmarkson5343 sure will do the video in time. resting nowadays and working on my other projects
Hi and thanks for the review on this updated K110s. Ive had the K110 for some years now, so an Update would be good. I'll use the X7 that I still use regularly. Can you confirm what stock settings XK have used for this new model please. Much appreciated.
I did not see much but the user manual seems to be using or suggesting same setup like before for K110. i am going to post a new video on how to setup on TX16S opentx, and will be using that radio from now on
Yes pls I need setting on edgetx
l'm as beginner , as you can get ...you didn't mention "striped gears" on crash , all else OK -ish but broken landing "gear" too/ hot glue everything ! plus added FPV cam ...Whew ....ordering batteries and Gears ...about a Dozen each ought'a do it ...for now ,
....now for that learning curve ! :^ )
depends how you crash
@@alishanmao
HOW ??...Spectacularly !!!! lol....trying to "tame that shrew" for long flights .... High pitch rate at low RPMs ...almost have it 7min on 75Grams plus volts draw on FPV cam...no videos on Ytube for help ...none ....l enjoy yours though
Thanks ! :^ )
Dave
I can’t wait to get my xk k110s helicopter. I hope you make more videos about this helicopter. If i use the stock controller which setup will be good for the xk k110s helicopter?
on stock setup, do not change anything. its setup really nice. don't mess it up.
@@alishanmao thank you , I will not change it
@@microhelicopters2106 you are welcome. have fun buddy
The helicopter is really good,but I don’t see replacing servos on bangood for the xk k110s helicopter. With out the replacement servos how will I fix it.
such light weight heli, its would take someone to stomp on it to break the servos :D
If the k 110s is more resistant than the k 110 it is the best helicopter in the world to start 3d because it is very resistant due to its weight
it sure is
Hi everyone.
Xk k110 s or xk k110 2s.
What does the S mean ?
Am trying to have a k110 that flies more that 5 minutes.
nice flying.. Hey will this radio that comes with this chopper bind with the k123 and k124.
Yes it will
Super video. It is a little bit to small, hard to see
Yes, you are right thanks for watching buddy
"Im not planning to crash it today" 4:14
Said every RC pilot ever.
LOL why not :) but we do crash
15:13 before the next flight, should you let the esc and the motor cool down before the next flight ?
no need
K110 had brushless main motor. So what's new with this one? New canopy and maybe better servos? Ive had several go bad on me on k110.
Thanks buddy, I totally forgot, it was a long time ago
Better servos. That’s all
@@enzomalaysia Cool. I've had 2 servos go bad with very little use on a k110. Really strange I haven't experienced that with any other heli.
Which is the most resistant for many Anne the 110s or 110 (because I was told that the tail of the rotor of the k 110 s looks more fragile than that of the normal k 110???
so far i have been flying and crashing this one and no issues at all. i bet 110s is improved
Uh! seams like the same size as the Blade Nano!?
The Nano is also a Tank due to its small size and waight, but lacks power for real 3D flying.
I like the 150 size direct drive helis alot more.
Not as robust as the 110´s but way more capable, but also to powerfull for indor flying.
This one might be a good candidate for 3D in the living room! 😏
maybe blade nano oem this one or they oem nano
I’m very sad! 3 days ago I bought a “new” k110! They didn’t tell me there was a new and improved version available.😞
well can you return and update the order?
@@alishanmao well I tried but to no avail. Maybe when I crash this version I can buy the new version in BNF! But most likely I’m not a good enough pilot to notice the improvements anyway.🙂
@@alishanmao no luck.😞
Hi, i get this BNF and i bind it to my radio máster, im a beginer, i bind it following your tutorial and works great on normal Mode.... im now playing with the gyro weigth for start fly 3d Mode... i have a question before ti try.... with -100% gyro (all stabilized) this can be inverted.... ??? Thanks great content....
Yes it will
@@alishanmao thanks....👍👍👍
Hello, how can i do to pass to 6G to 3D ?
I just ordered one last night. Hobbyking wanted about $45 for shipping, so I got it on Ebay. Where's the best place to find spare parts? (I'm in USA)
ebay possibly
I have some issues on my Xk110, hope you can help me
hi, what are the issues
Engine change rear brushed Xk 127
What about it?
Only the xk k110s weak is the damaging tail boom when crashing the heli
so far i did not crash on that angle lol can easily 3D print a stronger one
I broke 2 in probably 40 crashes. So it depends how you crash and on what surface. Other than that I broke 1 swashplate and 3 gears....
So they are very 💪.
I always fly over tall gras. That helps a lot
@@jwdrone512 I know but the tail boom strength is very very low so I was crashed my k110s a lot of times now I was replaced two broken tail booms I think the k110s tail boom need an upgraded tail boom likes k130 have
@@alishanmao I know the k110s better durable than other xk helicopters but not the best for the k130 helicopter.
Hey. Can you also put out your number on the curve and so on? I dont find the manual:(
watch my setup videos on this heli or any heli
ua-cam.com/video/45BcLJqOyWQ/v-deo.html
After having these helis for a while do you like the K110 or the E120S more? I want a "cheap" park flyer that I could crash and practice 3D on.
K110S wins the spot most of the time, but 120S has more power and more stability for performing advanced 3D for skilled pilots. however its not as durable as the K110S
Ohhh ok. That's a tough decision. I bought the 120S for a park flier that was a little more durable than my OMP M2 or T-Rex 450. I need more confidence with flying without stability mode on. I'm not a "new" pilot. I can fly the OMP M2 EVO with stability mode on and off. However, I'm not comfortable with 3D just yet. I hope the 120S will work out for me!@@alishanmao
How to move from 6G to 3D ?
@@zaparthotels8841 Turn the 6G channel on/off using your transmitter. I don't use the transmitter that came with the heli. I believe it's channel 5 that is 6G.
Hi, good video!!! Can you please tell me how to put expo on this Tx, from what I hear that ox is futaba platform meaning that the expo is reversed??
its different than futuba :) learned the hard way
@@alishanmao so did I, minus expo is less sensitive!!!!
Thank you for your reply!!
Hey again:) I have bought some upgrades to my k110s. 3 metal servos, are they better? And i have bought tail motor holder in metal and all the upper parts in metal. Do you think its good? Could you tell me what brushless tail motor i could buy? If i should do that too? I will go true your videos tomorrow to see if i can learn something from there:)
metal parts are sure good, but i do not know anything about tail brushless motor
@@alishanmao Thanks
I have this little heli on order. Still, I’m wondering if there’s something even smaller with gyros för indoors flying. Should have collective pitch.
This is the smallest with 3D. used to be others 100 size before, not anymore
@@alishanmao Thank you for your kind answer and Merry Christmas!
@@kenspaceman3938 you are welcome and have a good time with family bud.
Blade nano s3
Thanks man! I have this but i am afriad to use it🤣 If i fly on grass will it survive then? sry my english.☺
yes it will, its the most durable heli
@@alishanmao Thanks man🙂
Is it better than echain e160
in its size and category this is best
To me the XK X6 radio is way easier to setup than the TX16. Not to mention thr TX16 is much heavier and cost 5 times the cost !
agreed
Hello ali, my friend told me you are living in Hunan, is that right?
yes for only 16 years in Hunan :D
Hey Alishanmao, can you teach us how to fly 3D in tail step-by-step. I know how to fly heli, but I don't know how to set up a 3D?
3d in tail? what is that buddy? if you want to learn to fly 3D i will highly recommend you to get a flight simulator
How to move from 6G to 3D ?
Hello have an question about the Xk110s.. i lost the connection with the heli when i more than about 2 meters away. It's happened constantly? Do you have an idea whats the reason is?
receiver problem. possibly the built in rx has issue
Hi, what is RX? The Controller XK X6 ? Or inside the heli?
Hi thanks for all videos, maybe someone can help me I have a very similar hely the XK120 I’m using a radio master I replace a servo and now my front elevator servo is going the opposite way if I reverse the elevator all servos reverse, does anyone knows how to reverse just one servo? I even reverse the motor wire and the the other wire in the servo and that didn’t work, I’ll appreciate any help thanks
No idea about this, normally one servo reversing should only reverse that servo. you might have some mixing going on there.
Can you bind up the heli to a dx6??
you need to have a satellite rx then you can
Thanks for that, also what do you think of the nano s3 compared to the k110?
@@targetoz5470 welcome and never flown nano s3 so can't say anything
K110 have allready brushless BIG mistake for tester ..... :-(
can you turn off the stabilization/gyro on that helicopter? i want to purchase helicopter with pure mechanical controls without stabilization/gyro
Get 3D helis then
@@alishanmao is xk 110s helicopter still assisted with stabilization/gyro on a 3d mode?
Anyone bind this to JP4N1?
no idea
Do you have a control learning video?🤣
there are a few videos i did, on how to fly helicopters. watch them
ua-cam.com/video/i5LHyXg44DQ/v-deo.html
ua-cam.com/video/0XCLSr8mV4I/v-deo.html
@@alishanmao Great 👍
no the xk120 is best lol all my 110 s are busted
110s are the toughest