Petite coronas and cigarillos are of definite interest. I remember what appeared to be "Lanceros" from Richard Boone's "Have Gun Will Travel", which appeared to be extra long Petite Coronas. Fascinating! Thank you for this video.
Used your blend for my first batch of cigars. After they dried I tested one out and it reminded me of a hellcat. 2 weeks and enjoy them very much and might put a San Andreas wrapper on them. Thanks John
Great video. Simpler version of the "right way" to do it. I like this for most people that don't do this in production mode. Equal result but simple and straight forward.
Yes definitely still rolling:) I've acquired a few molds now for this size and am making them with a traditional cap as well. Hopefully will post more videos at some point in the future to show off new stuff.
Instead of cutting and stacking multiple times on the filler, you can roll the whole thing up into tubes and then cut the whole bunch in half and overlap each half you just cut onto the other. That way you do it all in one motion instead of doing it over and over. Nice job though. I use a pizza cutter and rolling pin as well. Just be careful not to roll it out too much with the rolling pin or it will make the leaf thin and create tears/holes in it.
Great advice, David. Thank you. I never wouldve thought of a pizza cutter and rolling pin. Im gonna try that. Any advice for making a box pressed cigar? Thats one I really wanna try next. Thanks.
Very informative video! I wished you could have zoomed in on some parts:) I’m wanting to start rolling my own smokes someday and I really think your video was well done! Thanks man! What’s it gonna take for you to send me some samples:)
Mate! I really want to smoke that puppy, great video bud I never thought the leaves came from the same plant. Great stuff mate ps are you still rolling and smoking them ?
If you Google Whole Leaf Tobacco the first few sites to come up with give you lots of options for your filler, binder, and wrapper leaf. If you want to take a bunch of dried tobacco leaves that are not flat to a state of being very flat just spray them all with maybe one spray per leaf, leave the bunch in a bag for anywhere from 30-90min, then keep repeating until the leaves slowly become more pliable and can be teased apart and stretched out. Do not go overboard in misting your leaf early on. You want it to be just barely pliable enough to stretch out gradually, remove the mid-rib, and then finally stretch each half even more and set aside. NOTE: Do you prepare too many leaves in too high a case for too long. Storing very wet leaves for even a few days can start creating mold problems and/or just disintegrating the wet leaves into something like tissue paper in the rain. Keep everything on the dry side (like it was shipped to you) until ready to use.
I use fruit pectin because it is readily available at the stores here in US). I have seen others use gum arabic (derived from the Acacia tree), guar gum, tragacanth gum, or even tapioca ground fine in a coffee grinder, etc. All these can be mixed with a little warm water until you have the consistency of honey. You will have to experiment and see what works for you. Just google cigar glue and see what comes up.
David Wilson David Wilson Can I make friends with Facebook to talk more about how to make a cigar? Can you share more about brewing cigar leaves from harvesting in a tree until you can use them to make cigars? (P/s: In fact, I don't know English and I'm using Google Translate to talk to you, if anything is wrong, please understand. Thanks for your enthusiasm..!)
Petite coronas and cigarillos are of definite interest. I remember what appeared to be "Lanceros" from Richard Boone's "Have Gun Will Travel", which appeared to be extra long Petite Coronas. Fascinating! Thank you for this video.
Thank you very much for the great video. I have had a few bags of binder and wrapper leaves for a while, I am inspired to roll one now.
Great video David! I'm new to rolling cigars, and this is very helpful. Looks like an easy way to end up with a vary nice product! Thanks for sharing
Used your blend for my first batch of cigars. After they dried I tested one out and it reminded me of a hellcat. 2 weeks and enjoy them very much and might put a San Andreas wrapper on them. Thanks John
Such a different style than what you usually see
more like a waste of time.
Great video. Simpler version of the "right way" to do it. I like this for most people that don't do this in production mode. Equal result but simple and straight forward.
Yes definitely still rolling:) I've acquired a few molds now for this size and am making them with a traditional cap as well. Hopefully will post more videos at some point in the future to show off new stuff.
Where is the best place to buy tobacco online, are you still rolling?
Instead of cutting and stacking multiple times on the filler, you can roll the whole thing up into tubes and then cut the whole bunch in half and overlap each half you just cut onto the other. That way you do it all in one motion instead of doing it over and over. Nice job though. I use a pizza cutter and rolling pin as well. Just be careful not to roll it out too much with the rolling pin or it will make the leaf thin and create tears/holes in it.
Good job. Good explanation. Thanks
Nice and neat I like how you make your way.
Awesome video thanks for the great info
Great advice, David. Thank you. I never wouldve thought of a pizza cutter and rolling pin. Im gonna try that. Any advice for making a box pressed cigar? Thats one I really wanna try next. Thanks.
👍👍
I like how your rolled your cigar
Are you still rolling them
What size do you have your board cut to
Very informative video! I wished you could have zoomed in on some parts:) I’m wanting to start rolling my own smokes someday and I really think your video was well done! Thanks man! What’s it gonna take for you to send me some samples:)
Hay quá bạn ỏi👍👍❤❤❤
😮NEAT WATCHED THE WHOLE THING 😮😮❤
Mate! I really want to smoke that puppy, great video bud I never thought the leaves came from the same plant. Great stuff mate ps are you still rolling and smoking them ?
Such a nice leaf.
Almost looks like a grown chard leaf haha
Can you do a cigar with only one type of leaf? For example only with a rapper leafe?
David: where do you get your leaf? It looks like they are in good condition, flat and whole instead of dried clumps.
If you Google Whole Leaf Tobacco the first few sites to come up with give you lots of options for your filler, binder, and wrapper leaf. If you want to take a bunch of dried tobacco leaves that are not flat to a state of being very flat just spray them all with maybe one spray per leaf, leave the bunch in a bag for anywhere from 30-90min, then keep repeating until the leaves slowly become more pliable and can be teased apart and stretched out. Do not go overboard in misting your leaf early on. You want it to be just barely pliable enough to stretch out gradually, remove the mid-rib, and then finally stretch each half even more and set aside. NOTE: Do you prepare too many leaves in too high a case for too long. Storing very wet leaves for even a few days can start creating mold problems and/or just disintegrating the wet leaves into something like tissue paper in the rain. Keep everything on the dry side (like it was shipped to you) until ready to use.
How can i grow my cigar leaves?
How to fermetize them?
Is it a difficult job?
Can I use shishs tobacco in rolling cigars?
Pizza slicer the best!!! 😂😂😂
Please.I am located in lebanon.and I need to know what types of leaf should I buy.
Please Role more very educational, and how and where can i buy my own cigar tabaco?
what is the cost per cigar to roll your own??
En cuba estan los mejores y no hay tanto protocolo
Are you still rolling cigars
hi i'm from vietnam, i love cigar. I want to ask you a question expecting your feedback. how to make handmade glue? Thanks u..!
I use fruit pectin because it is readily available at the stores here in US). I have seen others use gum arabic (derived from the Acacia tree), guar gum, tragacanth gum, or even tapioca ground fine in a coffee grinder, etc. All these can be mixed with a little warm water until you have the consistency of honey. You will have to experiment and see what works for you. Just google cigar glue and see what comes up.
David Wilson David Wilson Can I make friends with Facebook to talk more about how to make a cigar? Can you share more about brewing cigar leaves from harvesting in a tree until you can use them to make cigars?
(P/s: In fact, I don't know English and I'm using Google Translate to talk to you, if anything is wrong, please understand. Thanks for your enthusiasm..!)
Why so many? Do you sell or do you just like rolling
how many of you looked at your ipohone when he kept being text?? 🤣
Wish I can roll my blunts that big 🙁
Fuck me running sideways your videos are hard to find. Holy fucking shit batman
Mucho invento para un puro
Hoob
Looks a little too wet.