Can you show how to properly take apart and re assamble the clutch release? Mine has a small leather piece inside and i cant find any videos showing how to do this for this model.
A couple of things: Does it have the original motor on it? IF so, then move the stitch length lever to the opposite position that it is in now. If it has a replacement motor, you will need one that runs 'backwards' as the handwheel on this machine turns away from you. The original motors for this rotary machine operate in the opposite direction. Let me know if the problem is resolved. Thanks!!
Si su máquina Kenmore usa el mismo tipo de bobina y carrete que una Domestic Rotary donde las puedo comprar pues en mi ciudad Monterrey N,L, no las venden,o si las vende usted y mandármelas por algún método se lo agradecería!,
This machine can handle multiple layers of webbing. It could use a heavy duty needle as it takes standard needles. Keep in mind, that this is a domestic machine. The machine can handle the thread thickness that the needle will allow. Thank you!!
I just found a kenmore 95 I can’t figure out why the needle arm won’t work. Won’t go up or down when the lever Is pushed but you can rotate it by the side and it works I don’t know what I’m missing we found this outside of a storage unit
when you press the pedal, do you hear the motor running? IF the motor is running, is it making the handweel turn? I fthe handwheel is not turning, see if there is a rubber wheel on the motor. That is what drives the handwheel.
I recently acquired this machine and I am SO excited. However, I need to find a replacement post ( I don't know what it's called) for the spool of thread when making bobbin. Do you know where I could find one?
Can you show how to properly take apart and re assamble the clutch release? Mine has a small leather piece inside and i cant find any videos showing how to do this for this model.
@@vincenzo6545 try8ng to remember....does it fit into the shaft? It should be saturated with oil.
SOS!
I have a vintage Kenmore 117 sewing machine. It only sews backwards 😩😢.
Thank you! ❤️
A couple of things: Does it have the original motor on it? IF so, then move the stitch length lever to the opposite position that it is in now. If it has a replacement motor, you will need one that runs 'backwards' as the handwheel on this machine turns away from you. The original motors for this rotary machine operate in the opposite direction. Let me know if the problem is resolved. Thanks!!
Great video! Where would I order the motor wheel?
I have some!! Email me buzzsidds@gmail.com
hi, looking for a motor pulley for a Franklin 117.851 part #5767. Do you have one of those?
Tengo una maquina igual pero se me quebro el resorte de la tension alguien que sepa donde conseguirlo agradeceria mucho
Where can I purchase parts including a foot pedal and electric cord for this machine? Also need the pressure foof.
I might have the parts that you need.
Si su máquina Kenmore usa el mismo tipo de bobina y carrete que una Domestic Rotary donde las puedo comprar pues en mi ciudad Monterrey N,L, no las venden,o si las vende usted y mandármelas por algún método se lo agradecería!,
Por favor, ayúdame a entender / ¿Estás buscando el portabobinas? O algo más
Need the bobbin case??
Would this sew multiple layers of polyester webbing and will it accept a 18 or 20 needle using 67 or 72 threads? Not sure of the exact thread numbers.
This machine can handle multiple layers of webbing. It could use a heavy duty needle as it takes standard needles. Keep in mind, that this is a domestic machine. The machine can handle the thread thickness that the needle will allow. Thank you!!
I just found a kenmore 95 I can’t figure out why the needle arm won’t work. Won’t go up or down when the lever Is pushed but you can rotate it by the side and it works I don’t know what I’m missing we found this outside of a storage unit
when you press the pedal, do you hear the motor running? IF the motor is running, is it making the handweel turn? I fthe handwheel is not turning, see if there is a rubber wheel on the motor. That is what drives the handwheel.
Do you have a video on how to thread this machine?
Here you go!! ua-cam.com/channels/PtSCS8te6JCNTDWMYeltYg.html
I recently acquired this machine and I am SO excited. However, I need to find a replacement post ( I don't know what it's called) for the spool of thread when making bobbin. Do you know where I could find one?
I need the bobbin case for this machine and bobbins, can you help me?
@@sherrysasser9502 I believe I have 1 more.
@@tksewingmachineandrepair4243 How do I get you the info and payment? Thank You!!