Installing A Massive Front Splitter And Rear Diffuser! *2024 Audi RS3 8Y*
Вставка
- Опубліковано 13 жов 2024
- 👋 Our brand new 2024 Audi RS3 is coming together with more mods! Today I install a super aggressive front lip and rear diffuser! These are the gloss black ECS Tuning front lip and rear diffuser. I went with gloss black to match the rest of the gloss black on the 8Y RS3. You can also get these in carbon fiber! Installing the front lip is super easy. You just take out two screws under the bumper and then line up the new lip and install with the 3M tape. Then I used 6 screws to secure the rest of the lip with a small pilot hole under the bumper. Takes no time at all and this fits very well to the under side and gives the front of the RS3 a mean look! The stock rear diffuser is held on with a few tabs. It took some time carefully removing the factory rear diffuser. But I got it off without breaking a single tab! New diffuser looks very OEM but with 4 large fins rather than 2 small ones. So I like that alot. This kit with the RS3 being lowered on H&R springs and wheel spacers, makes the RS3 look even lower and wider! Great kit without breaking the bank and we love the new look!
Order Your Front Lip HERE!
click.linksyne...
Order Your Rear Diffuser HERE!
click.linksyne...
🤠 Check Out Our Website For RS3 Parts!!! brosfourrspeed...
Order Wheels and Tires From Fitment Industries:
www.fitmentind...
ENTER TO WIN!
Porsche: www.dreamgivea...
Order a Pedal Commander Here:
sdqk.me/59Z0ZU...
Order LED lights and All Weather Floor Mats Here!
www.lasfit.com/
SAVE 10% by using "Brosfourrspeed10"
Our Equipment:
Sony ZV1 ii: amzn.to/3QMqmWO
Cannon M50: amzn.to/3CTphmE
Rode Mic: amzn.to/3JDJMIB
Joby Suction: amzn.to/3SCrWZ7
64GB SD Card: amzn.to/3bJQwUK
GoPro Hero 10: amzn.to/3LHEj6e
DJI Mavic Mini: amzn.to/3uoOfHS
Apple MacBook Pro: amzn.to/3gSIdMD
LowePro Bag: amzn.to/3wi1wlX
Tripod: amzn.to/3cJMAr1
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Installing A Massive Front Splitter And Rear Diffuser! 2024 Audi RS3 8Y
Music By: www.epidemicsound.com
#audirs3frontlip #audirs3diffuser #2024audirs3bodykit
I remember I used to get a lot of parts from ECS tuning on my Golf R. So glad to see those two pieces. They look like they belong there, perfect OEM Plus. They'll look great in CF with my new glacier white RS3 with carbon package.
Fantastic video once again!
Yeah these look really good on the car! Carbon would be sweet for sure!
Brian man , I got the M340 for now , RS3 is my dream car , every video , you convince me to keep locked in and pay this car off and get back to Audi 🥂
M340 is no slouch! Thats lowkey my dream car man if I can’t get an RS3. They’re marking them up 18K in LA rn…..🤦🏾♂️
You get the 340 stock ?
The 2020 340 sounds 🔥🔥
@@PDJ4Lman they are always marking stuff up for no reason smh ! But yeah man the M340 moves out for sure . Honestly I only got the M340 because I couldn’t find a RS3 lol . I really like her , but the 5 pot got my soul man . Yeah she was stock and pre certified , 2020 model . Pops like crazy . Perfect daily tbh . I’m sure you will find one man , patience is key and lock it in 💪💯🔥😎.
Oh nice! Yeah this is a little rocket! Super fun car and feels like a baby M3 with it's character
Literally some of the most stable and high quality camera work Ive seen ! Amazing video love the close ups with that lens. I love my 23 WRX Limited project but I do plan on adding a brand new RS3 8Y go the garage or a G87 M2 (one of the two) Blessings man #SkyLyfeProjects 🙏🙏🏆
Thanks! You'll love the M2 and RS3! Both great options. RS3 will definitely feel like the next step up from the WRX. I love the M2 tho! Here's my comparison with the M2 and RS3 ua-cam.com/video/ItiFiS6vdiY/v-deo.html
What a beautiful looking RS3 !
Thank you!
Looks good 👍🏽. I have a similar lip on my rs5... I'm battling the aero dynamic pros and cons in my head though
Oh nice! This is definitely much lower, so we go very slow in and out of the driveway lol
Looks fantastic! 👍
Thanks!
That looks AMAZING
Thanks! Yeah it's a great touch!
One 540hp car one 400hp car and one 382hp car for sale. Bros4 lineup is massive! Great upgrade looks mean! Its Cool 😎 Brian!
Yeah these cars have some power! Love the new look!
Pro tip, pull the plastic off AFTER install so there are no fingerprints or smudges are scratches. Looks great! Love the car.
Yeah not a bad tip! I was careful and didn't get any scratches on these. But did have to wipe it down with some waterless wash
@@BrosFOURRSpeed I’m on the hunt for a nice rs3 as well. I hope I can find one that hasn’t been abused for a decent price. I really love the Nardo grey.
Seat belt change? Perhaps front and back.
We thought about it. But probably won't mess on this
I just ordered the rear diffuser for my 2024 RS3. I noticed the bottom tabs on the ECS diffuser doesn’t have plastic retaining clips like oem. It’s only at the top. Any issues with it staying put for you? How does the bottom of the diffuser stay in place if it doesn’t click?
It stays in place very well. The top tabs are more than enough to hold it in. Stock one is way overkill having so many clicking tabs
It’s 10pm here and I’m fighting with those damn diffuser bottom tabs!! Gave up for now and will get plastic prybars tomorrow.
Any tips? What tab did you first pry?
I started with the outer ones using the thick flat heard screwdrivers like I showed in the video. One by one pop them out. You might have to bend some things but I got it without breaking anything. Take your time
@@BrosFOURRSpeed just bought a set of plastic pry bars. Trying now with the car lifted a bit
@@Erictc310 It shouldn't bee too hard. The tops were challenging but just take it one at a time
@@BrosFOURRSpeed it’s done! No clips broke. I got the ecs installed. I think it’s secured but hard to tell. Tiny panel gaps and a bit squeaky when pushed around. You have same fitment issue and squeak? Seems fine.
Also! Had no idea about the kick sensors on the stock diffuser I had to remove and reinstall. You must not have kick to open on your trunk? Was a pain to reinstall for me but glad it’s all working as expected
@@Erictc310 my right upper corner was a bit tight. Got it within a few millimeters of being perfect. Can’t notice it. You’ll hear the squeak since it’s just plastic. Is your car US? Mine doesn’t have a sensor and I didn’t think any did
Thinking about ecs front splitter. You scraped it yet?
I've been careful and have not. But with the car lowered it's defiantly a pretty low setup. So you'll have to angle on steep roads and things like that. You could defiantly scrape or crack it if you hit something
Front lip spoiler and rear diffuser look great on the install video. HOW have they held up? How is their quality? And have you scraped bottom on the front since you also have lowering springs? Strongly considering doing the same thing on mine. Thank you.
Rear diffuser you won't have any issues with. We haven't scraped on anything since we are used to angling out of high inclines. But just be cautious to not drive the front into anything just in case. These aren't anything fancy. But the carbon fiber ones would probably also get damaged if you hit something.
Understood. Thank you for the quick reply. Is there a more durable front lip spoiler out there for the 8Y RS3?
Also, Your cars are beautiful and solid work with tasteful mods.
I have a 2024 Kemora Gray Metallic 8Y RS3. I'm going to be installing Racing Line lowering springs, as well as front and rear sway bar end links. And I've got ceramic tint and ppf on the car.
@@JG-xd1zz I haven’t seen much for the new RS3. These are pretty affordable so I’m very happy with them. Sick spec! And thanks. Been fun to modify!
We do have quite a few parts on our site too for these.
www.brosfourrspeed.com
Thanks. Will definitely check out your website. I've also got Unitronic midpies to delete the secondary cats, and also have AWE exhaust. Originally did Track edition, which was great but too much in-cabin drone from 1500-4500 rpm. So I put on the Track-to-Switchpath conversion and it sounds awesome just without the drone:)
@@JG-xd1zz Nice! Yeah we have midpipes and Switchpath! Sounds amazing! Did you do an intake yet? Turbo sounds come alive
What the brand for the parts, it looks good
As mentioned in the video, these are both ECS Tuning products. Linked in the description too
What is that white mat you often use? I need one of those! Thanks
It was a big chunk of foam that came in a package when I ordered a new brake line for the Lambo. Million times more comfortable then laying on concrete! So I've just kept it for these uses
How was the fit on the rear diffuser? I bought the carbon fiber option and the rear has a small gap on the upper right side. Idk if I got a warped piece or their mold just sucks.
The upper right on mine was pretty tight too. I think you probably need someone on each side pressing it in at the exact same time to get in perfect. If you get one corner in first, its seems hard to get the other side all the way in. Mine is just a few mm off. You cant tell unless you put your head right too it
@@BrosFOURRSpeed " Mine is just a few mm off. You cant tell unless you put your head right too it" yeah, that's what I am referring too. One corner fits like a glove and the other is a bit off. I guess it is their molds. If both plastic and carbon fit the same.
you should black out the bottom blue bit
Hmm, that'd really make the front look like a lot of grille
Brian, I live in North Carolina install this piece for me please, I will pay ya…this is not a joke I’m getting frustrated with this whole diffuser removal and watched this video I was say 50+ times…help
What specifically are you having trouble with?
@@BrosFOURRSpeed removing the clips that hold the diffuser in is not as easy as you made it, bought pry tools and used flat head no luck I even took it to a shop they had it on a lift and still couldn’t figure it out. But no worries I took it to a body shop today who said they are going to remove the entire rear bumper to get it off 🤦🏻
@@anthonylaspisa5829 Yeah it wasn’t that hard. Just one by one pop them out. Then with the bottoms knew out. Quickly pull the diffuser off from the side and it popped off.
Wasn’t crazy easy but wasn’t that hard. Hopefully they get it
Flat bottom steering wheel from Europe install.
Carbon shifter console replacement
That'd be cool! I'll have to look into one!
@@BrosFOURRSpeed it's the center console part that would replace that piano black portion that gets really messy. There's a company(UK) that makes a dry carbon version that matches the dash. It would be nice to have an American distributor... 😉
@@andrewy3711 Yeah that’d be sweet! I’ll have to see if O can get a kit like that on our site
@@andrewy3711do you have a website for the part? All I’ve found is those carbon fiber covers all over ebay.
sweet
Thanks for checking it out!
Really looks crap. Don't get why people do this to their cars and I couldn't drive it anywhere I live with that, it would get smashed to bits on UK roads. My RS3 8Y (sportback) is the daily, does the school run, shopping, etc. Got a 718 GT4 for play, best way to go with a small family, get sportscar and a hatch.
In person it looks really good. Our roads aren't bad so it's no big deal. Buy what works for you
🤡