Complete Network Configuration | DTP, VTP, EtherChannel, OSPF, NAT, VPN, STP | All Protocols

Hello, Welcome to PM Networking...
My name is Praphul Mishra. I am a Network Security Engineer by profession and a Certified Cisco trainer by passion.
About this video:-
Complete Network Configuration | DTP, VTP, EtherChannel, OSPF, NAT, VPN, STP | All Protocols
CCNA Configuration Playlist:-
• Basic Network Configur...
CCNA Topics Wise Lecture:-
• CCNA Topic-Wise Course
Interview Questions and Answers:-
• Networking Questions w...
Cisco Basic Configuration:-
• CCNA (Routing Switchin...
BGP Series:-
• BGP-CCNP
Our Social links:-
UA-cam:- / pmnetworking​​​​​
Facebook:- / pm.netwoking
Instagram:- / pm.networking
Telegram:- t.me/p_m_networking
Whatsapp:- wa.me/918511826341
#ccna​​​​ #newccna​​​​ #cisco_certification​​​​ #computer_networking​​​​ #cisco_networking​​​​ #ccna_routing_and_switching​​​​ #ccna200_301​​​​ #network_engineer​​​​ #cisco_routing_and_switching​​​​ #pm_networking #ccna_exam #computer_network #computer_networking #network_engineer #ccna_full_course #ccna_certification #ccna_exam #cisco #ccnasallary #ccna_security #network_security #cisco_routers #cisco_switch #ccna_salary_package_in_india #ccna_2022 #new_ccna #ipv4 #ipv4 #osi_model

[@HemanthJabalpuri]

0:01 Topology overview
4:39 PCs configuration
7:54 Vlan
10:25 Trunking, DTP
12:16 VTP
15:21 Layer 3 Etherchannel
19:11 SVI
23:35 HSRP
31:49 switchport as routed port
33:30 R1 config and OSPF
40:48 PAT
46:10 Default route
48:19 basic configuration on remote site(OSPF & PAT)
53:56 VPN
1:00:00 sharing routes over tunnel

[@PMNetworking]

Thank you very much

[@Prince_of_the_South]

@@PMNetworkingthats not all protocols

[@kidchannel5796]

STP????

[@AhsanTirmiziVlogs]

Spanning Tree Protocol@@kidchannel5796

[@furqonifurqoni6450]

you for sharing your knowledge so that I can repeat it again

[@ssubodh24]

Superb video i have got to know many concepts in single video

[@Amith332]

I rarely like any video, and tbh this video makes me to hit the like button....good work !

[@PMNetworking]

Thanks Bro

[@abhishekmalviya4278]

Thank u so much for making such kind of very knowledgeable video, which covers all the configuration.. it cleared all doubs from how network work and reach to internet

[@PMNetworking]

It's my pleasure

[@user-lk8mv5gd3i]

Simple and clean explanation ....thank you🙂

[@PMNetworking]

You are welcome 😊

[@Delta-V1]

Fantastic all in one LAB, Thanks bro!

[@PMNetworking]

Most welcome

[@mohammadrezamohammadi8809]

That's great and you are professional.❤❤

[@PMNetworking]

Thank you so much 😀

[@niravchauhan2278]

Informative and easy to understand content. 👌✌️. Please keep it up Sir

[@PMNetworking]

Keep watching

[@enablesecretcc7427]

I wish I knew about this video before! Subscribed!

[@ITStudents_With_Firanmit]

Best of bests. I liked tutorial and the way it prepared is also great.

[@PMNetworking]

Thanks for appreciation

[@buzooliibrahim8382]

what lab thx for it. plz do such more complicated labs. god bless u

[@PMNetworking]

Sure and thanks 😊

[@samuelaklilu4061]

thank you very much for your detailed explanation!

[@PMNetworking]

You are welcome!

[@AnilKumar-tm6fq]

So Amazing video thanks for big effort.

[@PMNetworking]

It's my pleasure

[@anilvk1877]

Thank you so much sir for making very knowledgeable video. Which covers all configuration. I have seen many types of video on UA-cam. But this video very helpful my all doubts clear how network work and rech internet❤

[@PMNetworking]

Thanks for sharing feedback

[@baryogar]

Your teaching is professional I am interesting in learning CISCO

[@PMNetworking]

Glad to hear that

[@TheSzczurowa]

Great job. I am so happy to follow Your great videos

[@PMNetworking]

Happy to hear that!

[@houlala2484]

Thank you for your explanation and thank you for speaking in english 🌹🌹🌹

[@PMNetworking]

You are welcome 😊

[@ambggil4773]

Excelente tutorial... thank you..

[@PMNetworking]

You are welcome!

[@thepuldarshana9056]

If ASA is implemented here, tutorial would have been even great .all in one 😊

[@PMNetworking]

Ohhh, yes

[@alittax]

28:25 A tip: in the Taskbar options, if you select "Never" under the "Combine taskbar buttons", it'll show all windows as if they were tabs on a browser.

[@PMNetworking]

Thank You So Much

[@yudhalama987]

awesome❤❤

[@birajnineilson6918]

Great video, thanks.

[@PMNetworking]

Glad you liked it!

[@salahuddin1968]

Thanks for sharing your knowledge.

[@PMNetworking]

My pleasure!

[@0m0sh]

Thanks for sharing brother...Happy New Year

[@PMNetworking]

Happy new year

[@VijayNehi]

Great informative video.

[@PMNetworking]

Thanks

[@Gksec-lr7xg]

I'm not a fan of VTP, but thanks for this very cool lab. I also added DHCP for the clients for extra fun.

[@PMNetworking]

Great to hear!

[@mahdinouira3261]

you did very good job
i wish it had voIP also..

[@PMNetworking]

ua-cam.com/video/gjUN3KnNLWc/v-deo.html

[@sajjadarts7286]

Great sir ji thanks 😊

[@PMNetworking]

Welcome

[@lakshanrathnakumara9158]

Thank you very much ❤

[@PMNetworking]

You're welcome 😊

[@kimasum]

thank you :) please make a SD-WAN video in eveng. your videos are very helpful. wish you all the very best.

[@PMNetworking]

Thank you, I will

[@patricklingstone6294]

I like this vedio ,,well explained and i will heat the subscribe button ❤

[@PMNetworking]

Thanks for appreciation

[@NamaNaq]

thank you so much sir

[@PMNetworking]

Welcome

[@avrupayolcusu]

great project

[@PMNetworking]

Thanks for appreciation

[@tarakrama]

SIR , THANK YOU VERY MUCH FOR PRESENTATION

[@PMNetworking]

Most welcome

[@Tech_Hun97]

Awesome guro ❤

[@PMNetworking]

Thanks

[@gaubureview744]

thank you share

[@maqsoodahmed-qy3yy]

Superb sir

[@PMNetworking]

Thanks

[@comosaycomosah]

my man! this was complete lol

[@surajrajendrapandey6917]

Great to see all the configuration, excellent.

[@PMNetworking]

Glad you like it!

[@yenaunghtwe]

(yes or no) very good sir ;)

[@PMNetworking]

My bad habit

[@sherin916]

Hats off

[@PMNetworking]

Thanks

[@Delta-V1]

Wish you do another one please using cisco CML. Thanks.

[@lindemanization]

Nice topology @PM Networking. I don't see any router redundancy. that would be great if it was also implemented. (like Vrrp , hsrp )

[@PMNetworking]

Ok sure, I will do it

[@youtubeaccountid489]

Thanks brother .plz do a topology with two DHCP router in two core switches
With And failover three tier architecture plz ❤

[@PMNetworking]

Noted

[@R_F_R_F]

Awesome man, Thanks for sharing a beautiful content. Can you also make a video about BGP related configs please?

[@PMNetworking]

Please check BGP playlist

[@hermandeulieunoubissie6689]

Trunk links should be configured on switches that need to carry traffic for multiple VLANs, typically on switches that connect to other switches (uplink ports) or to network devices like routers or servers. These switches are often referred to as distribution or core switches in a network topology.
Access switches, which connect end-user devices such as computers, printers, or IP phones, typically do not need trunk links because they only need to carry traffic for a single VLAN (the VLAN assigned to the end-user device). So, trunk links are not typically configured on access switches. Instead, access ports on these switches are configured with the appropriate VLAN membership.
However, in some cases, access switches might have trunk links if they are connected to other switches for specific purposes, such as connecting to another switch for redundancy or connecting to a switch in another building or location. But in general, trunk links are primarily configured on distribution or core switches in the network.

[@DilnuwanAmaraweera]

This is Superb. What's the software you use to simulate this setup?

[@AlbanoCManuel]

Thanks for sharing this amazing content. Please, I'm a litle bit confused about the inter-vlan routing, is that necessary to have HSRP configured so that it works ? And I noticed you didn't enable "ip routing" on MLSWs, and I bet that was the issue!

[@PMNetworking]

Yes, correct

[@huangzeyong]

Thank you for your explanation. how much salary in your country ?

[@thepuldarshana9056]

great tutorial . What is the simulation you use here ? . is it better than packet tracer ? thank you so much

[@PMNetworking]

Eveng

[@hamidghp3068]

👏👏

[@PMNetworking]

😊

[@alittax]

Thank you for the thorough video! I was looking for something like this for a while now. One question: 15:58 is there a reason why you first shut all interfaces?

[@PMNetworking]

This is recommendation that when you configure ether channel, first you should shutdown the interfaces

[@alittax]

@@PMNetworking Thank you!

[@LakedaimonII]

It's simply a best practice in case u dont want to negotiate some automatic protocols with your neighbor.

[@LakedaimonII]

To be more clear. You don't want any kind of trafic out of the port-channel until you finish the full configuration. If you already have configured the other side of etherchannel with Active, desirable or on Imagine what would happen. The traffic would be send out the etherchannel After the command: channel-group id mode xxxxxxx. For security purpose this is bad and you want to avoid It!

[@alittax]

@@LakedaimonII
I see. Yes, that makes sense. Thank you for taking the time and effort to write this thorough response!

[@parisaalipoor2644]

Thank you so much for this video... I have try to configure this topology, but I have a problem... I have created the vlans on access switches, but I don't know , why they did not create automatically in Distribution switches? what is the problem?

[@PMNetworking]

There are lots of possibility, check trunking, vtp domain name, version,mode and cr number

[@matthewespinosa7491]

podrias hacerlo en el packet tracer?

[@jalalhaider83]

Which iou you have used for access switches and then for distribution switches????? When you again used HSRP on switches do you know you have cut down the flow of traffic from whole one distribution switch, by standby it will not take any traffic unless your primary switch goes down, that's why for router it's ok for switch you have cut the whole chunk of traffic in distribution layer???

[@thepuldarshana9056]

Hi Sir, Here on core switches , you did not configure trunk mode or encapsulation dot1q . ? doesn't it need ? what does it actually do sir?

[@LakedaimonII]

It's a layer 3 etherchannel, not a layer 2. You cannot trunk a routed link.

[@merkavah2911]

Do you have a packet tracer version of this so we can practice?
Thanks for sharing your knowledge

[@PMNetworking]

Sorry, no

[@JKRowl]

Woa 😧

[@PMNetworking]

Thanks

[@arunvijay5427]

Can you please mention how these server images and all getting in eve Ng...I have only switch and router

[@kaleabayele918]

and last but not least VOIP ...

[@PMNetworking]

Already there on channel

[@marcosferreiradapaixao2801]

Hello Praphul Mishra
Good morning
Could you make the network topology available with the configuration files, so that you can do the configuration from scratch, please?

[@PMNetworking]

Noted

[@Vxlxdxcxoxixn]

Thank you! How can i learn VRRP protocol for redundancy?

[@PMNetworking]

Check VRRP video on my channel

[@nirmalsinhsinghaniya928]

Hi
Please make video on mac acl binding on switch 350

[@PMNetworking]

Noted

[@Kelechinwachukwu5243]

hi thank you for the video
please can you confirm the image you used for the L2 and L3 mine doesnt work in configuring the etherchannel

[@Kelechinwachukwu5243]

found the issue, the newer images are buggy and etherchannel dnt work. tried with the image on eve website

[@PMNetworking]

ua-cam.com/video/kOyDF5UeAJ0/v-deo.htmlsi=1-nEZrcPDAd8I_5M

[@wendina6516]

Hello Dear,
i was looking for the eve-ng file topology you built please share with me.

[@skumar-or6sd]

31:20 if anyone face issue with inter vlan routing. make sure enable "ip routing" on distribution switches.

[@benedalati1527]

Thank you. Worked

[@matth9939]

What are the resources required to run your eve lab as far as cpu, ram, disk etc?

[@PMNetworking]

16gb ram

[@newhorizonjunaidkhan7777]

How to Design a Hybrid Network Architecture for Outsourced Data Centre Backup
Please make video on this topic

[@PMNetworking]

Noted

[@chakablazy]

Hello, could you provide the various images used in the network so we can build the network from scratch or can you share the default network so we can practice along? Thank you.

[@PMNetworking]

ua-cam.com/video/kOyDF5UeAJ0/v-deo.htmlsi=Z6Xg29BhnwPtxL9K

[@abirahmed3189]

What will be the configuration if i want those different access switches for different departments (i.e. Management, Sales, Admin, IT) not with vlan but with physical IP and VLSM ?
Expecting your early reply, TIA.

[@PMNetworking]

I will make one video on it

[@ajmal0394]

Specify switch n router names in lab sir R1,R2...SW1 OR CORE SW

[@PMNetworking]

Devices name are visible bro

[@elvishinojosa6113]

What os are you using for the access switch? Do you mind sharing this?

[@PMNetworking]

IOL

[@Rakesh-sg5hn]

hi, thanks for sharing this video. appreciated.
just wanted to know what tool you're using for this. please let me know. and is it paid or free?

[@PMNetworking]

Eveng and its free

[@Rakesh-sg5hn]

@@PMNetworking thank you.

[@thepuldarshana9056]

sir , in this video you have not configured the STP or RPVST right ? . or do i miss that ?

[@PMNetworking]

Yes,

[@eleazarsanpedro9086]

Can you share the link for both L2 and L3 switch images you are using? Thank you.

[@PMNetworking]

ua-cam.com/video/kOyDF5UeAJ0/v-deo.html

[@milotxh]

Hi can u do that lab on packet tracer

[@PMNetworking]

Already available on channel

[@importantTut]

Dear Tutor,
How much RAM is needed to run this type of topology in EVE-NG ? Just 16 GB or 24 GB enough?

[@PMNetworking]

16gb

[@arunvijay5427]

Can anyone plz mention how to get that server icon...i uploaded switch and router image to eve Ng.

[@tams.]

How did you make the ' internet node " configuration ?

[@PMNetworking]

Only ip addresses is configured there

[@muhammadjahanzaib2065]

Can this lab be done on packet tracer??

[@PMNetworking]

Yes

[@thanhbinhvo2971]

I have a question. What protocol does your VPN run on? Thanks.

[@PMNetworking]

I have to check it

[@rishavpathak5288]

why we not used pre-empt either SLA track didn't done a failover test

[@PMNetworking]

Ok let me check

[@jaced27]

What program is that? I am looking for something that can imitate this topology

[@linux-u3g]

Eve-ng

[@rakuntal100]

@pm , May I know which software you are using?

[@PMNetworking]

Eveng

[@ramizuhair7020]

hello i need to come fixed my eve because i dont now how

[@marcusaurelius3487]

What is the software youre using for the topology?

[@Travelfreak_2]

Eve ng software name

[@galaxyspace4077]

hi do you arrange private training online ? , i have a small scenario on packet tracer , there i need to configure 2 ASA firewall , one as active and other as stand by and failover, i need someone to teach how to configure this. please let me know if you can arrange a online meeting and fees.

[@PMNetworking]

It will cost you 5000/- for one to one

[@galaxyspace4077]

which currency ?@@PMNetworking

[@PMNetworking]

INR

[@kingriff5178]

Which terminal r u using sir??

[@PMNetworking]

Eveng

[@amoltejankar]

Hello Dear Sir, Why you have a configured the VTP on all the switches

[@PMNetworking]

So that I we propagate vlan information

[@bernardzulu5295]

Are you using packet tracer or another program?

[@PMNetworking]

Eveng

[@bernardzulu5295]

@@PMNetworking Thank you

[@anggapatwa6030]

technically what is the function of portchannel 10 ?

[@PMNetworking]

Combining multiple links

[@makarasoem9978]

hello I am from cambodia.
I want to use it can you give me sources Image eve switch layer 3 , switch layer 2 router and server image .Thanks I like your video

[@PMNetworking]

ua-cam.com/video/kOyDF5UeAJ0/v-deo.htmlsi=q6IsGk2fTDLg8omO

[@sajjadnk9]

Can you please upload ios for this router and switches please.. Please share google drive

[@JT-qo1lf]

what emulation software is this?

[@muhammadjahanzaib2065]

Its eve

[@malikhyderabadcomedyreels]

Bro your teaching is good but your not showing proper which switch is configring A side or B side

[@houlala2484]

Can you pleese make a multicast topologie😢😢

[@PMNetworking]

I will create a separate playlist for multicasting.

[@houlala2484]

@@PMNetworking thank you so much

[@yasirsalahuddin8793]

in this simple network, we do not need to configure ospf.

[@PMNetworking]

You can avoid

[@yanickanjos2044]

Can you provide the switch's iOS? Please

[@PMNetworking]

Please check eveng setup video, in the description of that you will get link of switch

[@yanickanjos2044]

@@PMNetworking Thank you very much, I will test it out and then provide feedback

[@DanielSmith-hd9iq]

to be honest I would love to see the hindi version of this videos because sometimes its hard to understand what you are really speaking. If you speak it from your heart in hindi we will understand it better and you will also be able to explain it in better way

[@dannybrown317]

Nooooooo English please. This is for gloabal audience

[@erikornelas7]

Im mexican and I can understand him perfectly