ULTIMATE MB-200 Minibike Transformation! | Ep.2 - Test Ride
Вставка
- Опубліковано 30 жов 2021
- We will be racing this bike at the GoPowerSports 180 Race on November 13 in Midlothian TX so if you are in the area and want to see your favorite go-kart youtubers and do some racing, stop by! Tickets are on sale here: www.gopowersports.com/gps180
In the last episode of the MB-200 2 build series we got the mini-bike 90 percent complete and able to be test ridden. We took it out to Daniel’s (@DJTuningCom ) land to do some test riding before finalizing the build and the bike performed flawlessly. After ripping around for a few hours, we took it home and did the finishing cosmetic touches. The stock plastic fenders were replaced with steel trailer-style fenders and the bike was given a nice coat of Krylon Bauhaus Gold paint with black accents and the final result looks amazing!
Thanks for watching, stay safe and stay tuned for the next video!
*Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only*
Build Break Repeat is Proudly Sponsored by GoPowerSports
CHECK OUT OUR INSTAGRAM! build.break.rep...
LINKS TO OUR NEW TOOLS AND EQUIPMENT: linktr.ee/BuildBreakRepeatCha... (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
------------PARTS USED ON THIS BUILD-------------
TRAILMASTER MB200: www.gopowersports.com/trailma...
FRONT BRAKE KIT: www.gopowersports.com/trailma...
SUPERPIPE: www.gopowersports.com/mb200-s...
GAS TANK: www.gopowersports.com/gas-tan...
JUGGERNAUT: www.gopowersports.com/super-3...
60T REAR SPROCKET: www.gopowersports.com/rear-sp...
GRIPS: www.gopowersports.com/biltwel...
THROTTLE CABLE: www.gopowersports.com/40-miku...
MIKUNI FLAT SLIDE: www.gopowersports.com/24mm-fl...
Build Break Repeat is Proudly Sponsored by GoPowerSports
-------------TOOLS ------------
Tools we use and have received from sponsors:
Texas Metalworks 40x80 Welding Table
texasmetalworks.com/product/f...
RogueFab Tubing Notcher
www.roguefab.com/product/vers...
Pro-tools Tubing Bender
pro-tools.com/collections/tub...
Optrel Crystal 2.0 Welding Mask
usa.optrel.com/en/eye_protect...
Optrel Grinding Mask
usa.optrel.com/en/products/au...
---------MUSIC --------
Intro Song - Jimmi by Andrew Applepie
• Andrew Applepie - Jimmi
--------MERCH---------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/stores/build-br... - Авто та транспорт
Looks great!!! Clean & Sleek! Well done, gentlemen! Excellent upgrade.
Looks and runs great! The yellow and black reminds me of the old-school Suzuki dirt bikes. I still say you guys have the best channel name on UA-cam!
Reminds me of my old rm 360
He got that boy running good
Thought it was going to look like a bumblebee, but you did it justice. Looks really freakin' good.
Bike looks great in the yellow/black scheme. Good job!
Thanks, it came out killer! Had to go for something flashy on this one
Looks Awesome. Keep up with the Fun!💥💥👍👍
Nice job guys. I really like the two tone instead of all black. I am old and like the old school look. lol Hope school is going well. Prayers sent your way. God Bless!!
Thank you, we love how it turned out too! Thanks so much for the support
I might buy one this weekend
Lookin good guys! 😎 🦖 💪
Yessir!
SO CLEAN😍
Thanks you guys!!!
Nice!!!
WOW! Not bad.
That bike is a beautiful by the way...
Some how i missed this love the stripe its remeniscent of an actual stripe on a late 70's motorcycle
Mightve been the honda gold wing but dont quote me on that
I wish someone would come out with a 2wd drive kit for mini blikes. The rokon 2wd is ridiculous expensive.
I'm think getting mini bike for hauling logs out of forest, as atv are heavy and take up a lot space on a trailer with logs.
thats off its head,, cool
Digging the yellow but I would have painted the fenders yellow too. 😃
Agreed that it needs a little more yellow, we were thinking of painting the headlight bucket. Went with black for the fenders because it's easier to find black paint to touch them up with when they inevitably get rock chips and scratches
@@BuildBreakRepeat The head light is ok black just the fenders need yellow...
Now the factory fenders look cringe
dude.. wear i mask when you are rattle can painting. I learned the hard way.
Looks like a 70's Yamaha dirt bike in yellow. Looks good though!
The trail sport ts600 is actually bigger with 20inch tires and I’ve only seen one guy do a video of it on YT
Can I ask you,
What brand of helmet are you using?
Where i can find the gas tank
Go Go Power Rangers!!!!
How did you get the charging system and headlight to work if it’s stage 4? I thought the billet flywheel doesn’t have magnets?
It’s a tillotson. Stock flywheels have a rpm range of 10000 for 15 seconds. Considering people blasting 8000 rpm on a stock predator flywheel and not worrying about it.. I’m sure their just sending it lol
Yeah for the race we'll put the billet flywheel on but for puttin around we'll use the stock flywheel with the magnets so we can run the lights
@@BuildBreakRepeat thanks
What is the top speed
it makes me think of the challenger from cobra kai season two
You need to paint the fenders yellow and the wheels or paint the wheels silver it would look better theres too much black on that bike also it looks better yellow and black I love that color yellow..
I can tell you first hand that you need the LED head light conversion because the stock one is crap. Honestly it is a huge improvement!
I agree, I think we'll have to do that next!
Is this basically the hurricane?
Pretty much, Hurricane looks like it comes stock with front brakes and cool graphics though
I was wondering if y’all know someone who can teach me how to work on my own bike
Clwaning carbs is entry level stuff that anyone can do
The only thing you need an experienced person for is the valve adjustment if they need adjusted
Going inside of an engine is usually not worth it as parts are usually astronmically high its literally cheaper in most cases to just replace the engine
2:41 sec was sketchy lol
Tank graphics are a big swing and a miss
At the end of the video we say talk about redoing them, they were just a quick 2am mockup to see if we liked the idea
Throw on a supercharger
There is no such thing as a “full suspension” mini bike, non existent! This is a pit bike that Go Powersports sells..
Why the hell would you put that custom tank on it and leave that funky gas tank on the motor. That looks dumb
We did it for the extra range, we ran a 70 mile minibike off road course and more gas meant less stops
I guess your definition of fast is different from mine, 30 mph isn't fast, that is a snails pace, but your a kid so I'll try to understand you, but me I like to take a stock 150 HP motorcycle motor , boost it, add NOS and push 350-400 HP, you should try it one day so you'll have an idea of what is fast
It's not meant to be fast, It's geared and built for an off-road race so we gave it a big rear gear for torque for the hill climbs and we can still hit 55mph on it. We had this same engine on a smaller 1970's el tigre mini bike frame and we hit right around 80mph for the top speed which is plenty fast for an old rusty minibike