Bro, I recommend that to clean the plastic pieces instead of struggling carving with the brush, it is better to use warm almost hot water and leave the pieces for about ten minutes, the water will make the dirt come off easily when carving
@@studiofr I'll look for this special plastic primer here at Brazil. I want to make a custom on a Tectoy Brazilian Master System console. Thanks for the tip.
Until finally a video game control that the vibration motor is removable and not soldered directly on the plate, this makes it much easier when we need to clean or repair
Nice vid man looks awesome. 😊 What kind of spray paint do you use for this? I've been attempting to spray my og xbox v1.4 recently and I've not been having much luck. I'm using Montana gold but no matter what I do or how long I leave it everytime I apply a protective lacquer the paint separates it's really upsetting me now lol.
@@studiofr awesome thanks man much appreciated. Spent the day stripping the shoddy job I did and got it half prepped again just need to grab some more paint. Keep up the good work. Shot you a sub too. 😉
The bubbles you see with most soaps you buy at the store are from foaming agents they put in them, They have no real affect on the soaps ability to clean/kill germs. I know this because my grandmother makes her own soaps.
a question if i buy these over there colored xbox one buttons will it fit on xbox 360 ? why here in Brazil they only have to sell these Xbox one buttons!!!!!
I know you gift of fixing everything that you put your hands my Super Nintendo need new outer case it work but the plastic switch is broken but power switch work I have to turn power switch it
Hi, I use degreaser to deep clean the controller, to make sure there's no trace of grease on controller before painting job. But you can do the same with warm water and dish soap. 👍🏻
@@studiofr thank you!! I love your videos so much I am going to do something similar to this with some xbox(original) controllers that I don't use because they are ugly lol.
Man, I want a chance to buy these, but I don't want to pay a monthly subscription fee so that I can fight 25k other people to try and get one item a month.
Brother can you help me ? I am very frightened , because my dualshock 3 is having problem , can you restore my controller if I send it to you . I live in India and there aren't people who can restore it for me . Please help 😭😭😭
www.findandrestore.com/product-page/xbox-360e-customized-black-and-grey
What kinda silver is this
You just makes me want to learn how to restore consoles, I can't stop watching your videos. Your work is truly amazing
You paint plastics with precision and confidence. I would envy it, but I'm just glad I can see how its done. Great work.
Paint details? Type, color, etc... This is an awesome color scheme. Great work!
I subbed when you were around 8k subs. I'm going to enjoy watching you hit a million.
Thanks! 👍🏻👍🏻
Bro, I recommend that to clean the plastic pieces instead of struggling carving with the brush, it is better to use warm almost hot water and leave the pieces for about ten minutes, the water will make the dirt come off easily when carving
That one looks nice. Loved the 360 as well. I'm going to do one of my 360's soon.
An Eddie Van Halen inspired console would be cool.
Make a luigi's Mansion game cube
Esmy y me dijo que si a
Say please
@@KamalasFakePolls
Pretty please make a Luigi's Mansion Game Cube
Parabéns, Ficou Incrível! Sucesso Cara.
Nice work, man!
Wow that's make me want to do the same to my own joystick. nice work dude ❤️
Any chance of a SEGA Dreamcast? That would be cool.
Sure 👍🏻
Great custom as aways, congratulations.
One question: why after the sandpaper you don't apply a primer layer before the paint?
I always apply adhesion promoter before paint. It’s a special primer for plastic.
@@studiofr I'll look for this special plastic primer here at Brazil. I want to make a custom on a Tectoy Brazilian Master System console. Thanks for the tip.
excellent as the command was.
Amazing job!!! Congrats!!!!
Excellent painting
I'll be waiting for that Nintendo Wii with Resident Evil theme.
Do a ps4 in the colours of the ps1
Sony made the DualShock 4 20th Anniversary Edition it is rare and not cheap, and I would love to see his recreation.
I'd watch that
Until finally a video game control that the vibration motor is removable and not soldered directly on the plate, this makes it much easier when we need to clean or repair
Agree 👍🏻
Really great job! It would be awesome if you also customized an original xbox.
Man, it's bealtiful
Would love to see a PS3 Slimline customization.
It would be nice if you could please tell us what kind of sandpaper and spray cans you use for these projects. Great videos!
Hi. Sure! 800 grit sandpaper. Montana pro cans, black matte, stainless steel and matte varnish.
@@studiofr Thanks a lot!
Yo soy de Chile está buenísimo el contenido
Lo mismo digo
Essa cor ficou muito top.
Ficou muito bom mesmo
Parabéns
New thumbsticks are $2 dude👌
Beautiful!!!!!
I like the Xbox 360 E my auntie gave me her Xbox 360 Slim because she is staying at my house
Yeah
Quedó increíble!! Solo una pregunta!! Aproximadamente cuanto tiempo dejas secar para que se endurezca bien la pintura??
Não esperava menos de você, o trabalho ficou impecável, parabéns
Hey Find & Restore !
Maybe SEGA Mega Drive 🎮 plus Streets of Rage 👊 cooperation Theme next time? 🤔
Ps. Great job as always Sir! ✌️ 🚀
the button is cool
great video...Awesome color
Custom gaming laptop would be awesome 😁👍🏼
Grey rubber mushrooms and chrome transforming d-pad it's really needs to be)
Muito bom! Uma sugestão para video, caso consiga nintendo wii.
Boa! 👍🏻
Nice vid man looks awesome. 😊 What kind of spray paint do you use for this? I've been attempting to spray my og xbox v1.4 recently and I've not been having much luck. I'm using Montana gold but no matter what I do or how long I leave it everytime I apply a protective lacquer the paint separates it's really upsetting me now lol.
Adhesion promoter, montana pro paint, montana pro varnish
@@studiofr awesome thanks man much appreciated. Spent the day stripping the shoddy job I did and got it half prepped again just need to grab some more paint. Keep up the good work. Shot you a sub too. 😉
can you do Nintendo Wii restoration
I don't know why, but everytime I see someone washing dishes with soap but there's no bubbles is kind of piss me off 😂😂😂
it's called budget lol.
The bubbles you see with most soaps you buy at the store are from foaming agents they put in them, They have no real affect on the soaps ability to clean/kill germs. I know this because my grandmother makes her own soaps.
You can tell me that screws are the ones that are in the cross, I just can't, see, wait and see my comment.
I don’t think that’s the controller that originally came with the console. It should have the “transforming” D-pad.
Gostei. Restaure computadores também.
Exatamente
I prefer the videos like this without the backing music
I've always worried that a spray painted controller would feel sticky/tacky, do they not?
Not at all! 👍🏻
@@studiofr Thanks for the reply! Do you use a clear coat at all?
I wish to see a n64 added to the collection yk
Maybe soon?
nice job and color =)
Awesome.
What method do you use to make the Xbox logo on acrylic?
I have a Glowforge Plus 3d laser printer
My Xbox 360 start playing 📀 dvds again
you are the best
How did you paint the buttons? A, B, X and Y?
Bought them like this in ebay
Can you tell me the link of the buttons for the controller? I not found ):
Hi, www.ebay.com/itm/332730520583
@@studiofr Thanks for that! :D
Nice intro
Where did you get that brush? It seems good for washing the parts
Amazon
Nice work)
Very good! ✌
My toxic trait is thinking if I did this, it would look just as good.
Beautiful
Thank you! Cheers!
Love it.
Are people sending you these consoles to fix up or are you just finding them on ebay or somewhere real cheap?
Ebay
Ma con la 360 slim hai fatto il video comunque eccezionale
Very nice 👍✌️
Why don't you mention the products you used this time?
Where do you get those custom-coloured buttons?
Did you use any kind of clear coat? If not that paint is going to rub off on your hands.
Where do you get those ABXY buttons? Or Did you paint it too ?
Ficou muito bom! 👍
Make arcade tekken 4 ps2 mod pls it will be so cool and nice i mean with arcade stick and little screen
Hi , could you please restore and mod a Ps4 controller ?
a question if i buy these over there colored xbox one buttons will it fit on xbox 360 ? why here in Brazil they only have to sell these Xbox one buttons!!!!!
i like it so much
Why didn't you just buy a gray controller instead?
Hey, where or how did you make those control keys, do I want them too?
Bought those on ebay
O que vc passa por último para a pintura não sair devido o suor na mão?
Verniz acrilico
@@studiofr Certo, A base d'agua né.
Fosco, Brilhando, Semi Brilho?
@@studiofr faço essas perguntas pq pintei o meu mas acho que o verniz fosco está soltando com o suor. Já na primeira jogada intensa.
Amazing 👍
What grit sandpaper did you use the sand down the controller?
400 grit
Yeah
lindo trabalho!
What kind of paints do you use when you do these projects?
Why didn't you just buy an official controller with those colors? There is one that looks exactly like your mod.
doesn't the paint brush away after some time?
I always apply a hard matte clear coat to protect the paint.
I know you gift of fixing everything that you put your hands my Super Nintendo need new outer case it work but the plastic switch is broken but power switch work I have to turn power switch it
What grit did you use for the controller's surface?
Hi, try to restore Nintendo Ds Lite, 3ds old, 3ds Xl
Waaaaaait a minute those weren't the original buttons
How did you paint the buttons?????????????????
bought them like this on eBay
Where have you ordered the buttons from?
Where did you found those face buttons?
Caramba queria fazer isso com o meu slim :/
Qual tipo de tinta que você usa para pintar o controle?
Usei uma tinta acrilica fosca da marca Montana pro.
When did he painted the buttons ?
I didn't. I bought those black 👍🏻
Stick ps2 restoration video please
A stick, this video is concole
Sure, next week the controller will be ready. 👍🏻
Okay, i will wait, i like this channel
Thanks! 👍🏻👍🏻
How durable is the paint does it peel or chip off?
I always use a hard clear coat to protect the paint
What’s the advantage of using the degreaser?
Hi, I use degreaser to deep clean the controller, to make sure there's no trace of grease on controller before painting job. But you can do the same with warm water and dish soap. 👍🏻
Thank you and what grip do you use to sand it down?
400, 800 and 1000 grit
how did you paint the buttons?
I bought those in black.
What brand/type of paint do you use?
Montana pro matte
@@studiofr thank you!! I love your videos so much I am going to do something similar to this with some xbox(original) controllers that I don't use because they are ugly lol.
Cómo pintaste los botones?
Los compré asi en ebay
Man, I want a chance to buy these, but I don't want to pay a monthly subscription fee so that I can fight 25k other people to try and get one item a month.
Vuelve por favor 😔
Brother can you help me ? I am very frightened , because my dualshock 3 is having problem , can you restore my controller if I send it to you .
I live in India and there aren't people who can restore it for me . Please help 😭😭😭