Nah. I used an older model at my first job. At times, the ram was left down to compress the cardboard, and after a little time, it could be pressed once or twice more to compress the cardboard a little further, maybe a couple of more inches. That machine was robust and never broke down. A good tool to have, though, is a straight steel ramrod with a pointed end to poke holes in the cardboard when feeding in the bale wires. Sometimes, cardboard would block the wire slots and it was necessary to ram holes.
PTR Baler and compactor one of these days I’m gonna call my Baler New York northern recycling is it gonna be big Balers don’t do anything if their is a bale if there is below to the other arrow is still not safe will damage the chamber door in the feed gate in the middle no, if you was above the arrow, it was damaged the feed gate ,blows up the motor and breaks the hydraulic cylinder and all the oil will come out how much charge in the Baylor about 9090 9090 so I gazillion a gazillion a pressure in the Baylor you could compress anything in there you want
How to turn off the bottom light...ours wont reset
ptr baler be like brrrrrrrrrrrrrrrrr
Costco uses two of these balers
Do you guys have tire baler available?
Really go talk to gradall that’s in United Kingdom they make tyre balers😒
How can I push out the very last bale of paper without starting a new bale of paper?
THATS A STUPID QUESTION TO ASK😒
Thanks for this baler
Does anyone know if it damages the cylinder to leave the ram down? Thanks
Only if u constantly try to force it down after the downward cycle stroke has stopped automatically.
Nah. I used an older model at my first job. At times, the ram was left down to compress the cardboard, and after a little time, it could be pressed once or twice more to compress the cardboard a little further, maybe a couple of more inches. That machine was robust and never broke down.
A good tool to have, though, is a straight steel ramrod with a pointed end to poke holes in the cardboard when feeding in the bale wires. Sometimes, cardboard would block the wire slots and it was necessary to ram holes.
HEY MIKE SAVAGE
Say hi to maren
Everyone has been talking down in your in the comments
So why wont my "full bale" light go off?
Maybe it’s burnt out😒
B
Alexis Scott
PTR Baler and compactor one of these days I’m gonna call my Baler New York northern recycling is it gonna be big Balers don’t do anything if their is a bale if there is below to the other arrow is still not safe will damage the chamber door in the feed gate in the middle no, if you was above the arrow, it was damaged the feed gate ,blows up the motor and breaks the hydraulic cylinder and all the oil will come out how much charge in the Baylor about 9090 9090 so I gazillion a gazillion a pressure in the Baylor you could compress anything in there you want
Dead incardboard baler