First DTF Print with Roland BY-20: Start to Finish
Вставка
- Опубліковано 31 лип 2024
- Check out how easy it is to print DTF transfers with the Roland BY-20 DTF Printer 😍 Here's a start to finish video for the Roland BY-20. SHOP Best Roland BY-20 Bundles: shrsl.com/4dgra
MORE INFO and IMPORTANT LINKS!👇
🥰 All Roland BY-20 Bundles: shrsl.com/4dgra
🖨 Recommended Stand for BY-20 DTF Printer: amzn.to/3Zei6lj
Roland BY-20 Ink Set CMYKW: shrsl.com/4dgrh
🎥 BY-20 videos and tutorials and everything you needed to know!!
HOW TO Videos for Beginners
🎥 Complete Start to Finish BY-20 Setup & Unboxing
🎥 Roland DG Connect Hub for BY-20, BN2-20A & BN2-20 Overview & Workflow • Roland DG Connect Hub ...
🎥 Roland BY-20 Initial Media Setup (Don't Be Scared): • Roland BN2-20A Initial...
🎥 Roland BY-20 Utility Features: New Sheet Cut and Move (Stop Wasting Media): • Roland BN2-20A Feature...
🎥 Looking for more Roland videos from start to finish? 🎥 How about 1:1 help? Don't let the name fool you, WE HAVE THAT TOO at Silhouette U!! 👇 silhouetteu.com/pages/silhoue...
Want Roland videos and tutorials straight to your inbox? Sign Up for our newsletter 👉 www.subscribepage.com/roland-...
🎥 SUBSCRIBE TO OUR UA-cam CHANNEL! It really helps us bring you more craft tutorials!! 👉 / @silhouetteschool
#rolanddtfprinter #rolandby20 #rolandbn2vsrolandbn20 #rolandbn2-20
#rolandbn2workflow #rolandbn220aflexi #rolandbn220acutlines
#rolandbn2 #rolandbn2setup #rolandbn220a #rolandbn220
#perfcutvinyl #rolandbn20perfcut #rolandbn20a #cuttingaprofit #affinitydesigner
#rolandbn20 #bn20vsbn20a #rolandbn20tutorials
#silhouetteschool #freesilhouettevideos #freerolandtutorials #howto #silhouettebusiness
00:00 First Print with Roland BY-20 DTF Printer
00:15 Meet the Roland BY-20
01:05 Using Flexi Designer with Roland BY-20
01:32 What is Roland DG Connect Hub
01:47 BY-20 Utility Setup for DTF Printing
03:16 Using Flexi Designer with Roland BY-20
04:21 How to Set Up White Layer for Roland BY-20
05:04 Printing White In Designs with Roland DTF
05:42 Adding an Underbase in Flexi Designer
05:55 How to Add Choke to DTF Prints in Flexi Designer
06:42 Sending to Print on Roland BY-20 from Flexi
07:06 Print Settings and Options for Roland BY-20
08:24 Finishing Up DTF Transfers After Printing
Check out how easy it is to print DTF transfers with the Roland BY-20 DTF Printer 😍 Here's a start to finish video for the Roland BY-20. SHOP Best Roland BY-20 Bundles: shrsl.com/4dgra
Hi Melissa! Just got mine! Cannot wait until unboxed
Hi Melissa. Do you have a set-up video for this printer? thanks
Can you make a start to finish on dtf for the bn2-20. Please . There's no option for light or dark garments.
You can not print DTF transfers on a Roland BN2 or BN. The BY-20 or BN-20D is the Roland DTF printer
Wow. What a world of difference between trying to print white on the BN-20D. I have to upload into adobe and manually create the white inside the design and export again or it will not print.
Hey I’m getting my printer tomorrow. Do you have a link to which film I can use for the printer other than the usual 23 inch Roland paper? I’ve seen a few videos where there are shorter film that can be used but where should I find them. Thank you!
Can you use cadlink with the by-20?
Good Morning, Melissa. I had the Prestige A3+R and had to send it back as there were alot of issues. Is this printer a much better option? I am looking for something durable and on the quicker side
Yes this is a good option as is the STS 724 if you are looking for a 20-24" DTF printer that an go inline. ua-cam.com/play/PLT9hB3BOKb_iOBE32OpKOZqTMkBJfwa2I.html
Love that printer. Melissa I am looking into making decals and hangtags for the airport. Do you know what will be the best printer for that? It has to last for years. Thank you.
Hi - when you say hang tags for the airport, I'm not sure what you mean
Hello how has the printer worked for you i am anxious to know
What inline dryer system are you using in the video? Unless I overlooked the details below, I didn’t see where you mentioned the setup.
The 24" STS is what's shown. Here's a link shrsl.com/4f0k9
Could I also print and cut stickers\labels with his machine?
Thank you!
No, this is a DTF printer. It does not print on vinyl type media
Hi Melissa your context is very helpful. I want to buy this machine, and I remember watching one of your videos. I don't remember which one was, and you mention there that you have a promo-code. Thanks you.
At this time I don't believe there's any type of promo code but you can purchase here: shrsl.com/4jtbf
Thanks you.
Hi Melissa! I am considering getting this printer. I did want to know though, roughly how many ink cartridges does it take to print an entire roll of DTF film?
Well I can tell you my biggest issue right now is how fast the white ink runs through. That's my biggest complaint about the BY20
Melissa how are you? Quick question about the ovens, do you have any recommendations for a good DTF oven?
Hey there! This is my preferred oven: shrsl.com/4e3qz
Thank you so much Melissa! @@SilhouetteSchool
Hello! I wonder they will roll out next.
They should of thought more about the market and rolled out a 600mm wide printer. This is an expensive desktop printer and the transfers are not goona be cheap compared to the trade prices that are available for transfers. Roland got this all wrong.
Can u help mines print in a square around image not just behind image?!
Make sure you are using the exact settings I am in the video. There is a setting in "Print Parameters" that would put a full white box around the image and you don't want to use that option.
Melissa I am way confused with the underbase settings in Flexidesigner. Do you have a video showing all the options by any chance? If I use Underbase>Variable Underbase and set the choke .01" it lays down a pretty thin later of white. With a black design almost non existent. If I don't select either Underbase option neither Solid nor Variable the white underbase is very white even on a black design BUT I don't get a choke. Is there something I'm missing that I must do to get a real white underbase using the Variable Underbase setting with choke?
What is the difference with the Roland bn2-20?
The Roland BN2-20 is an ecosolvent printer and cutter. The BY-20 is a DTF printer. Very different things :) Here's a look at the BN2 ua-cam.com/video/0l2M50zm59I/v-deo.html
If this BY-20 has the technology of BN2, then the printing speed is extremely slow. I am interested to see the real-time printing speed video.
I have the BN2 and it just prints CMYK+White very very slowly.
Do you have bi directional on and are you printing in High Quality vs Standard? Also if you are not printing the full width across the material, change the orientation of your image so it's utilizing the page width instead of portrait. Since the printhead moves all the way across, it will print faster in landscape than portrait as well as those other setting changes.
Be careful with Roland company. We bought BN20 DTF Printer from Roland UK. The printer did not work and Roland refused to change the printer only offer us repair we lost £4000 with Roland UK.
Please tell me more in detail!!?
Why you shouting !!!!!!!!
B/c that's how I talk and I get excited about this stuff :)