Power Over Ethernet (PoE and PoE+) - in 5 Minutes
Вставка
- Опубліковано 19 сер 2024
- PoE and PoE+ allow normal CAT5e (or above) Ethernet cables to carry power to a device so that it doesn't need to be connected separately to the mains. Learn all about Power Over Ethernet is just 5 minutes!
Links:
TP-LINK 802.3af Gigabit PoE Injector - tyvm.ly/IANf
Ethernet Cable - tyvm.ly/Ud51G
MikroTik Audience - tyvm.ly/ofqG
Note: These are affiliate links.
Introduction to Android app development: www.dgitacadem...
Let Me Explain T-shirt: teespring.com/...
Twitter: / garyexplains
Instagram: / garyexplains
#garyexplains
Who else understands what Gary is about to say before they watch his videos but watch them anyway just because he is a damn fine bloke ?? ;-)
Well said! Gary is always worth listening to and I always learn something new. 😀
I think that we've had something similar to that in the land lines, it was powered by the land line and didn't have any batteries or needed to plug it in.
Yes, a traditional phone line supplies 48v DC
What's the difference between power and data? How a device or PCB distinguish between power and data ?
Power line has bandwidth limit.
Ethernet cable is more scalable.
Landlines have a bell wire, to allow the operator to ring the remote device.
Phone makers used this to also power phone displays, answer machines, etc.
@@Almighty_Flat_Earthdata is just a state of power being turned on and off at certain voltages and speeds (look up how basic binary and logic gates work as a very very simplified version of computing and data transmission.) . PoE would be a constant voltage to power a device
I finally get it! Thank You Gary for the clear explanation. You've given me confidence to deal with PoE devices and talking to men about it. Jan - 68 years old, San Francisco
This is so cool!
It kinda feels like a digital equivalent to phantom power, which music gear uses to send 48v to condenser microphones along the same wires which the signal is sent.
Would be nice to also include the differences between active and passive PoE. Like for people wondering why their PoE Ubiquiti AP doesn't work with their 802.3af switch/injector
I don't anyone should be using passive PoE. If they are they should stop.
@@GaryExplains For me it's nothing more than an annoyance, but I'd like to hear your reason on why it shouldn't be used.
There is no power negotiation. The power is supplied regardless and that could damage the powered device.
@@GaryExplains Pretty sure though that the TP-Link you showed is passive.
No, it isn't.
POE is an absolute blessing when fitting Closed Circuit TV cameras. I use CAT 6e because some cams with IR, UV lights are a bit more hungry for power
What a great and simple explanation of what a POE and a POE+ is. Thank you.
Glad it was helpful!
TIP: Dont use 5 volts PoE on cable over 5 meters, you wouldn't get enough power. Iinstead run 24v, 36v, or 48v adapter then use converter box at the end of the cable to convert those voltage to 5v.
What PoE router are you using that allows you to select the input voltage?
@@GaryExplains All my routers are TP-Link that use 5v input, but i use 24v TP-Link PoE for source power. Then i use "PoE+Voltage converter" before the power enters router.
So the diagram like this.
[24v TP-Link PoE Power Brick] ---> [Ethernet cable over 15 meters] ---> [PoE+Voltage Converter 24v to 5v] ---> [5v input TP-Link Router]
I am a little confused. Are you saying your have TP-Link PoE routers that use 5v? Looking at the specification for the TL-SG1005P it uses a 48V/1.25A external power supply.
@@GaryExplains My router has no built-in PoE. its only have DC power input. My "PoE+Voltage Converters" have 24v PoE input and ethernet + DC 5v output.
OK, then I don't understand the point about 5v. If you are using a PoE injector or a PoE switch then 5v isn't an option.
let me make it simple for you... Ethernet, 10Gbit or 1Gbit requires 4 pairs, 8 wires in total, but 100Mbit ethernet only requires 2 pairs, 4 wires in total, how an injector works is that it takes 4 wires and disconnects them to ensure there's no backfeed of voltage, it then leaves the other 2 pairs (4 wires) uninterrupted as a sort of "bypass".
Next is the voltage injection, that's simple it adds the needed voltage down the wires that are now split off.
it's quite safe as long as you don't plug it in the wrong end, it's quite easy to set up and doesn't cost an arm and a leg in patent t(r)oll's
In the next video please explain the risk of connecting a PoE cord into a non PoE Ethernet Port and incompatibility issues please.
There are no risks of connecting a PoE powered device into a non-PoE router, or vice versa. PoE is smart enough to know what is going on.
@@GaryExplains The key point is that no special "POE" cable is needed. Just the same standard CAT5 or CAT6 cable for either POE or non-POE connections.
Maaaan, I love how you pronounce "Microtik" as "meecro-"! People don't realise how irritating it is to hear "raspberry pie", "golden number fye"... -that's what I was going to say until I heard "raspberry pie" right at the end of this video :D
I don't understand. I am saying Raspberry Pi correctly or not? Because I am saying it the same way that the actual creators of the board say it.
@@GaryExplains Just complimenting your "micro" :) I was implying that correct pronounciaion of greek letters and words is rare (especially in US?), and is quite strange, actually. Don't really know about RPi creators, though )
Good video.
I didn't notice Gary say but POE uses the standard cat5 etc cables (not a special cable).
Pretty cool. Would be nice to have this as standard in every home router soon :)
I think Power over HDMI (or MHL) needs to make a comeback! There are so many streaming dongles & sticks sold these days and what's holding me back from getting one is the unnecessary cabling I'd need. My TV even has a MHL port but no stick or dongle supports it 😫 The right place to start removing the charger is on these things as there are better ways (for consumer AND manufacturer)
*GARY!!!*
*Good morning Professor!*
*Good morning fellow classmates!*
MARK!
Very nicely described, Thanks
Can i use poe from megabit poe switch
For 30-40ft for powering a wifi cam (1.5Amp,18W) using poe splitter instead of drawing power line
Small caveat. Gary is describing Active POE which is quite intelligent - the PSE and the device handshake to get reqd power. POE is typically 48VDC.
There is Passive POE like I have for my Ubiquiti wireless access point (AP AC LR) where the injector puts out 24 VDC without any handshaking etc.
So need to he careful not to mix Active and Passive kit, lest the smoke escapes.
Indeed. Passive PoE isn't a standard and should not be used by anyone.
nicely explained
That is interesting. I have had 100 mbit routers for years. Worked fine for my home. I got a new internet provider and there modem in Gigabit. So I got 2 used 3Com Gigabit off ebay and I was floored how much faster it was. :-O
While some of the wiring was cat4 when I bought the house 20 years ago, I have updated some with cat5 in areas that was easy to reach... :-)
So while searching for routers I see the PeE ones and did not get them as I was not sure what they were for or if I would need them and I probably won't. But I see where the outside camra bit would be useful...
An there is the little add-on box in the video if needed. Lol
Off to run some Cat5e cable with my son, the boys are excited as the games are faster they say... Lol Don't play games so I have to take there word...
Thanks for the video!
LLAP
Keep up the good work Gary !!!
Always 😁
@@GaryExplains Does this channel consist of videos related to process instrumentation or its focused on Automation ?
I cover almost everything tech related, but not much industrial stuff, more consumer related.
@@GaryExplains Good to know
So what happens if you hook it up to a non-POE device will it Cause damage
well explained
wow great explain
Glad you think so!
Really enjoyed the video, thank you.
Can you use a POE switch on regular Ethernet which doesn’t require it? I would presume a fairly common use case and question which wasn’t covered.
What about POE + ? Do they make something to convert POE to POE + I have POE but need POE+ for a security camera? How can I accomplish this
can handle PoE router?
Can higher wattage PoE++ be used with regular cat5e cables or do they need higher cats or special types of cables to handle the current?
Great video! Will you also make a video about "Power over Data Line" and Single Pair Ethernet?
Thank you for the clear explanation
One thing I'm curious about is what wires in the cable deliver power? (And is color standardized like yellow is power and brown is data or maybe blue could be power or data)
Gary. How does an injector affect the max advised cable run for Ethernet? Total length of "Switch to Injector" plus "injector to powered device" less than 100m? I would expect that a lot of the time injectors will be sited close to switch, so inj->device length can be nearly the full max advised length.
Here's the scenario: I have a smart device that consumes too much power for POE, but I need ethernet to control it and regular plug-in power to power it. Here's the question: Would I need a smart ethernet switch to turn off the power at that particular ethernet circuit?
Awesome explanation!
ahh so this is how these injectors work.
Thank you
Thanks Gary!
You are very welcome
12.95 wow such precise stop
What's the difference between power and data? How a device or PCB distinguish between power and data ?
I do not know offhand, but I would guess that Cat5 has 4 pairs, so 8 wires. The PoE probably assigns 1-4 to power and 5-8 to data. Or something similar.
With a Tplink, POE injector, can we connect to a 12v DC camera? The tplink injector produces 48v output DC.
Why do I have to put in the data cable? I was trying it with power only but this doesn't work. I need it just for the power component.
Great topic , can't wait to watch the next part which I hope will be more technical 😜
Hello i just came across your channel.Could you tell me more about this
Tell you what about it?
Thanks, very helpful.
Wow this is awesome!
hello,! how much power output needed to power a router 12v 1a wired repeater(rujie 1200 pro) with a distance of 30meter upto 50meter I'll be using a rujie 1200 pro as main router and ax1800tplink or rujie 1200 pro as wired repeater that are connected to the main router but I don't know how much power I need there are 52v,47v 1a, 24v 1a, 15v 1a , 12v 1a as the option for POE adapter or POE injector
Gary could u explain what Tesla is doing with its dojo project D1 chip .
I have a POE Wifi Accesspoint. Can I run that cable to A Sonos Music amplifier first then up to the Accesspoint without damage to the amplifer?
I remember we used to use those injectors on my mom's laptop back in 2011 😂
Does the Cat matter, i.e. Cat 5 Cat 6 etc.
Cat 5E or above.
@@GaryExplains
Thank You Sir 🙏🏼
Only dogs
Ethernet cable has like 8 wires in it would have been nice to know which lines were the power and which lines were data or does both get transmitted over the same lines?
Well it depends on the exact standard being used. Some use two pairs others four. Plus there are different methods known as alternative A and B. In "A" the data and the power are on the same wires, in "B" they are separate.
@@GaryExplains but all POE systems are interchangeable? So how would one know which method is which?
@@rockys7726 You don't need to know. PoE is designed to auto detect and auto negotiate.
But if you have the injector that close to the device it's powering, you might as well just connect a power supply directly to the device.
🤦♂️That was just a demo. It can be further away.
Really nice.
If you have an NVR device for your security cameras (poe), should you still get a switch? I am interested in getting a security solution that has the option to connect and power 12 cameras (they say it’s just plug and play).
Man you're so underrated
Tell me about it! 😜👍
@@GaryExplains You deserve millions of subscribers. I learned a lot from your channel.
will it work on ip camera with Ethernet socket?
Can you use just any type of Ethernet cable to utilize PoE?
It will probably work with standard Cat5, but Cat6 is recommended. I was using Cat5 in the video (I think, it was a while ago!).
So not all devices/ports support POE?
Does POE degrade speed? ie, from 1Gbps to 100mbps? because that is what I am getting - or I am using a poor POE injector?
No it doesn't degrade the speed, but you need to use a 1Gbps injector. It sounds like you are using a 100Mbps injector. What model are you using?
@@GaryExplains I was using a TPLink injector POE2406.. will check my wires.. maybe there is the problem too?
Is all these cat5e and Cat6e cable are POE compatible?
This equipment only solves the problem of data + power out, but still requires a normal connection to a power plug to get electricity. It should be data + power, both in and out.
Power + data in / out from which device in the setup?
@GaryExplains If the switch was connected to a poe router, which exists, it could be powered by this connection instead of being dependent of a power plug which may or may not exist nearby.
Sorry, I think it is my lack of imagination at fault, you clearly have a layout in your mind, but I can't quite grasp it. So you are thinking of a remote location connected by PoE and you want to power a switch at the remote location along with other equipment all over the single PoE cable? By "remote" I mean anywhere without a mains socket nearby.
@@GaryExplains I never mentioned a remote location, like in another location. I don't know your house but in mine I don't have power plugs in every wall, so if I want to stand the poe switch in an area where there is no power plug and I am not interested in using a power cable along the wall, a poe switch that could receive and send data + power would be convenient, that was my point from the beginning.
I did say that by "remote" I mean anywhere without a mains socket nearby, which includes "remote" places in your house. That is why I added that last sentence.
But as for your question, why not put the PoE switch with your other networking equipment and then run the Ethernet cable to where you want the end device. Why do you need a PoE switch in the part of the house where you don't have the power plug? I think I am still missing something in my understanding.
Can I connect a PoE into a normal switch that is powered externally?
No.
Hello Gary, thank you for this excellent video and instruction. I am a newbee so pardon my question. Does the TP Link injector provide power for one device - in other words, if I have more than one device that is not POE compatible, do I need one injector for each device? Also, the description on Amazon does not include support for Windows 11. Can you recommend a Windows 11 compatible injector?
Thank you in advance.
Or you can use a midspan to provide PoE.
Aren't midspans and injectors the same thing?
Does this trasfer data as well?
Yes
Hello, does that mean that a typical wifi router that was issued by ISP providers does not contain POE capabilities at all?
Unless the ISP router specifically says it supports PoE then it doesn't. That is why I talked about PoE injectors etc.
Super! 🙌
thanks for the video. How many cable pairs does the PoE needs?
2 or 4 pairs depending on the standard your equipment uses. Best bet is just to use a full Cat 5 or 6 cable.
@@GaryExplains thank you for the answer! I used 2 cable pairs and connected them on the pin positions 1 2 3 6 for data and power but i can only find poe adapter that uses 4 5 7 8 for power so my poe access point is not turning on. Should i change the pin positions to 4 5 7 8 or there is poe adaptet on the market with 1 2 3 6 pin positions? Or i understood it totally wrong and data pins 1 2 3 6 is not for power and i need more cables for that?
Thanks for this.
Seems a bit of a niche tech.
For remote cameras or such, a better approach is to have the data over WiFi and a simple power plug - eg mini usb cable over wall wort. Sounds like a fire hazard to have any significant voltage running over cat-5 , not to mention the susceptibility to lightening or power surges.
Wifi is almost never a better approach to anythin
@@LA-MJ ,
Nonsense. I have dozens of remote cameras which use WiFi. All I need to provide is a power supply- via extension cord, or battery pack or solar panel. These would not be feasible if I had to run cat-5 everywhere.
Wifi is shit when you have thick walls and signal interference on overcrowded air waves.
That’s quite an evolution from BPL that really never took off.
I don't even like my power supply plugged into power.
for POE do not use copper cladded cable will over heat and cause fires
Really? Any links to examples of such fires?
@@GaryExplains yes have you heard of the channel by Chris tidous that does installs of Poe equipment he mentioned it plus I had that issue too
@@GaryExplains also Lawrence systems as well touch’s on Poe not to use copper classes as well
So to be clear, you have had PoE equipment catch fire?
@@GaryExplains yes i have had the cable burn up yes
Nice video. What is IEEE802.3az do you know ?
Energy-Efficient Ethernet (EEE) is designed to reduce power consumption during periods of low data activity. But I have never used it or tested it.
Power!
Am I the only one who initially thought POE was somehow hooking up ethernet to a regular power outlet via maybe an adapter and then have full ethernet speeds?
That does exist, it is called Powerline Ethernet. I mention it in a few of my videos, but I don't think I have done a full video on it.
Sorry about this, but this was a useful video in 2002...
Before 802.3af was released. Interesting! 🤔
@@GaryExplains so the question is that I wrote 2002 instead of 2003?
Really interesting...
😂
And UA-cam wasn't launched until 2005. 🤪
@@neoaliphant dear friend, personally, as an installer, I use poe since 2006, so you cannot say that my statement is false.
You can add whatever word salad you want, it remains a very old topic.
Rootah
Indeed, it is the correct way (i.e. British English) way to say it. How do you pronounce routine?
@@GaryExplains we say rewt-tah in Australia.
@@GaryExplains damn. You're right about rootine.
😂 Sounds like an inconsistency in Australian English to me!!! 😜
@@GaryExplains this inconsistent (or not) Canadian drives his car over a "root" (but not a "rahwt"), yet uses two different "rahwters" (same name, different devices) to carve decorative edges on woodworking projects and direct his network traffic. Ain't English wonderful? 😄
Can you please explain why would someone choose this over Powerline networking ? And Could TypeC be the cable to replace all of these annoying cables ?
By powerline you mean being able to use the mains cables in your house to carry Ethernet? If you do then the answer is because they are two completely different things that don't solve the same problems.
Because Powerline doesn't work if you have rooms connected to different phases. Powerline is also much slower and the speed greatly depends on the wiring and the quality of the electricity (including all the other devices plugged into the wall).
Generally you do not want to use PoE unless you're using cameras or mesh routers in the roof, but I needed it for getting one switch to work as it's located in a place where there's no plugs for electricity nearby.
@@GaryExplains Thanks for the reply. Love your videos.
I use PoE for CCTV. Instead of running 2 separate cables like a peasant, I just run one. It's cheaper to buy an ethernet cable than to buy the coaxial siamese cable analog CCTV uses.
@@GaryExplains Does this mean POE is just the opposite of powerline? POE uses the ethernet to carry/extend power, and the powerline uses the mains cables to extend the ethernet?
Come on ... put the next video up!
Eh?
ong
👍
I have no idea PoE is a thing lol
What an awful idea. This reminds me of the late 80s and early 90s, when a single bad node on a 10baseT network was able to short out and cause thousands in damage to the rest of the network because a 25 cent part went bad. No thank you.
OK FANALI GOT THEAT .DEFENETLI . OK BUT FOR WAT ELS EXEPT SECURITI CAMS SC CAMS !!! HMMM
Is there technical difference between yellow and blue etherent cable? my AP outdoor device not tuning on with yellow
No difference just the color of the plastic.