#PetzlTips
Вставка
- Опубліковано 1 жов 2024
- With the RESCUCENDER, you can install a retrievable rope system that doesn’t tighten around the anchor point. It’s a good solution if the underside of the anchor is blocked or impeded (by electrical conduit, for example). As for any retrievable system, carefully check the condition of the anchor to avoid damaging your ropes. Be sure to identify the blocked side and the retrieval side of the rope to avoid any confusion.
#RopeAccess #Petzlrescucender #PetzlProfessional
Очень дорогой Самосброс ))))) 😂
Крис всё так же бодр)
He is a genius 👍
Sweet
Not a great idea. I wouldn't count on the rescue sender as an anchor system. They are the weakest part of a system(13kn If I remember correctly) and more likely to fail than anything else he is using. If one fail the other is likely to as well due to the shock load.
He's just rappelling and those are probably static ropes so even if does somehow fall hard enough to break them he's got bigger problems than hitting ground
😂 when are even you loading the rope with such forces?
IRATA says any anchor needs 15kn, realistically in an equipment failure in an emergency rescue (somewhat likely especially with descenders without panic lock) you’re likely to shock load the system at least close to failure point of ducks/ shunts like this, I personally wouldn’t use it for anything other than an absolute get out of a jam situation honestly
This is a video by the manufacturer of an approved use... I think they know what's an ok use.