The course content is very engaging and easy to understand, I like it so far, there are minor issues such as "bacteria" itself being plural and does not require additional "s", the singular of bacteria is "bacterium", However, they can be overlooked!! Keep up the good work!
Sir hamara aeration settling 980 ml/1000ml ho raha hai uski vajah se clarrifier outlet me se sludge carry ho raha hai Iska kya reason ho sakta hai aur solution kya hai
@sandipkalikate5158 The issue of low sludge density, high SV30 (980 ml/1000 ml), and sludge floating could be due to filamentous bulking, low MLSS (1000 mg/L), or low dissolved oxygen (DO). Key Corrective Actions: 1. Increase DO to 1.5-2.0 mg/L. 2. Gradually raise MLSS to 2500-4000 mg/L. 3. Perform a microscopic examination to check for filamentous bacteria. 4. Ensure proper nutrient balance (BOD:N:P = 100:5:1). 5. Avoid hydraulic overloading and toxic inflows. These actions will help stabilize the sludge and restore proper settleability.
Jaise apne video me dekha hoga ki bacterial activity km ho jati h.. jiski vajah se wo organic matter ko thik se digest nahi kr pate.. baaki agar aap video ko dhang se samjhoge to achha samajh aayega. Thanks dear stay connected ❤️
Sir hamare aeration tank ka bacteria bahut weak hai settling nahi ho pa rahi hai Aur aeration tank ki sludge poly ki tarah gaadha ho gaya hai Please solution bataiye sir
Hi dear, Thanks for writing.. Dear you can not control vfa in process.. yes if your plant is not working properly then surely there will be less production of vfa. I recommend you to watch 'How to remove ammonia from Water ' titled video on this channel.. Nitrification and denitrification topics in this video will help you to understand the whole thing of acid generation.
Bacterial activity ke dauran acid formation hota h jiski wajah se pH girta h. Aap 'How to remove ammonia from Water ' Nitrification and denitrification video dekh sakte ho whaan puri tarha se sanjhaya gya h.
Love you sir from Bangladesh.
Love to you.. from heart.. stay connected dear.
The course content is very engaging and easy to understand, I like it so far, there are minor issues such as "bacteria" itself being plural and does not require additional "s", the singular of bacteria is "bacterium", However, they can be overlooked!! Keep up the good work!
Hi VK,
Thanks for your valuable feedback.
Thanks dear stay connected ❤️
Sir ek fecal coaliform test procedure pr video bna dijiye
Sure stay connected thanks dear
Sir primary ka ph kitana hona chahiye
Great work
Thanks dear stay connected
Thankyou so much to share this problem
Thanks dear stay connected.
Thanks sir 👍 most usefull
Thanks dear stay connected.
Thankyou so much to share this video
Thanks dear stay connected.
Okay sir thank u.
Thanks dear stay connected
why we don't maintain temperature through some Device (Submersible heater etc) inspite of dosing expensive products
Sir hamara aeration settling 980 ml/1000ml ho raha hai uski vajah se clarrifier outlet me se sludge carry ho raha hai
Iska kya reason ho sakta hai aur solution kya hai
MLSS kitna h??
1000 hai MLSS
@sandipkalikate5158 The issue of low sludge density, high SV30 (980 ml/1000 ml), and sludge floating could be due to filamentous bulking, low MLSS (1000 mg/L), or low dissolved oxygen (DO).
Key Corrective Actions:
1. Increase DO to 1.5-2.0 mg/L.
2. Gradually raise MLSS to 2500-4000 mg/L.
3. Perform a microscopic examination to check for filamentous bacteria.
4. Ensure proper nutrient balance (BOD:N:P = 100:5:1).
5. Avoid hydraulic overloading and toxic inflows.
These actions will help stabilize the sludge and restore proper settleability.
Thank you for instant reply sir
Good
Thanks dear..stay connected
Stp main Winter mosam main collection tank ka pani dudhiya colour ka kyu ho jaata hai
Jaise apne video me dekha hoga ki bacterial activity km ho jati h.. jiski vajah se wo organic matter ko thik se digest nahi kr pate.. baaki agar aap video ko dhang se samjhoge to achha samajh aayega.
Thanks dear stay connected ❤️
Okay sir
Yes good
Thanks dear stay connected
Sir hamare aeration tank ka bacteria bahut weak hai settling nahi ho pa rahi hai
Aur aeration tank ki sludge poly ki tarah gaadha ho gaya hai
Please solution bataiye sir
Sir apna number send kar dijiye please apse baat karni hai
Tumhari samasya samjh nahi aa rahi plz join telegram group.. etp knowledge junction
Same problem we are facing now, if you got a sloution on that please inform
Maybe you have developed filamentous bacteria... Please share more information
How to control VfA?
Hi dear, Thanks for writing..
Dear you can not control vfa in process.. yes if your plant is not working properly then surely there will be less production of vfa.
I recommend you to watch 'How to remove ammonia from Water ' titled video on this channel.. Nitrification and denitrification topics in this video will help you to understand the whole thing of acid generation.
How to reduce max cod< 250in biological treatment
This video was about the same.. but can tell me what are the issues you are facing in treatment plant??
Sir, HRT समझ नाही आ रहा है फिर से समझा दिजिये
नमस्कार काशीनाथ जी,
एचआरटी वाली वीडियो आप चैनल पर देख सकते हैं उस वीडियो में हाइड्रोलिक रिटेंशन टाइम के बारे में ढंग से बताया गया है।
P h low ho jati hai
Bacterial activity ke dauran acid formation hota h jiski wajah se pH girta h.
Aap 'How to remove ammonia from Water ' Nitrification and denitrification video dekh sakte ho whaan puri tarha se sanjhaya gya h.
I Need ETP CHEMIST Job
1 year experience
Stay connected with telegram group
@@ETPKnowledgeJunction okay
I'm already there....
Good
Thanks dear stay connected