@@hippiechicksmomma8691 isn't the frame DIY though? A lot of photography even at the highest levels requires tape, pins and staplers. ;) Just the nature of the game.
Perfect hints... no question! But please give me one little answer: Why jewelry is NOT shot in front of BLACK background...??? (Almost 80% of jewelry has got WHITE background) I don't understand the reason or the effect.
I can answer that! I don't know how much light theory you know but I'll try to explain it as simple as possible. Light travels from a source (like the sun or a lamp) until it hits a surface. Then it bounces off said surface and reflects parts of it onto other surfaces. (Like sunrays casting a purple shadow through a vase or reflecting onto a car, casting a bright light inside a shadow.) It's not always visible to our eyes but when working with any reflective surface, like metal and gems, any color you have in the surrounding area will reflect and affect the object your taking a photo of - even more so when you zoom in. So if you f.e. have a colored curtain covering your window or painted an accent wall in the room, it will change the light and color of the object in the photo. When you work with something as small as jewelry, which is entirely reflective surfaces, it's very noticeable. So if you were to use a black background, it will effectively alter the color of the jewelry according to the camera. For example: A golden ring on a white piece of paper it will look gold but take that same ring and put it on a black or navy blue surface and the ring's color will look almost bronze because the metal "picks up" the color around it. This is also why photography studios are usually a giant empty room with only equipment in the middle - because you don't want exterior light sources and you don't want the light to bounce off the walls. Hope that helped!
@@Mitsu92 THX... perfect answer! I understand because I know handling of light BUT I DID NOT THINK ABOUT REFLECTION MYSELF :) (Although I'm using additional exterior light)
@@ulizarembach3747 I only learned about this recently myself. I didn't think reflections would "attract" color to that extent but it makes sense when you work with something so small. Glad I could be of assistance, have a wonderful day! :D
You can do it either way, just make sure if you’re moving toward the subject that you’re not losing any of it on the edges of the frame. I usually do a test run.
I just finished my first pieces and was 'just going to take some shots' then add them online haha but I see that jewelry photography is a bit more than average photography
Good tips. I'm trying to do this all on my own and learning as I go along. I can't afford all this equipment so I'm improvising a lot of things. I spent most of my cash on a Canon T6i (may not be a pro camera but I figure it's how one uses a camera), a new laptop because the old one died; the cheapy items were the two lamps from Target and two 500W lamps that last only 60hours. And lastly, a DIY lightbox from a nutribullet box. Is it possible to avoid image stacking by finding the sweet spot between the ISO, apature opening and exposure time do the depth of field won't be that much of an issue? I imagine when there's a gain on one factor, there's a loss in another. But right now I feel that rail thing won't be in my budget.
lol you don't need all this ridiculous equipment. Jewelry photography ALWAYS requires post processing. You're better off learning to master that (since it's free to do and only requires a computer) and just get a decent sharp photo of the jewelry and use focus stacking to get it all perfectly in focus. Photoshop has an easy way to just load a bunch of photos and automatically focus stack them.
I loved the end results!! But for a guy like me who would like to get that kind of results in a "home studio" is pretty much impossible. Especially since I don't have that kind of equipment. I'm trying to photograph jewelry for online websites... Ebay, Etsy, etc. Using a Nikon D750 with light boxes and a photo tent. The issue is... keeping the whole subject in FOCUS with the proper lighting!! What a pain!!! TONY... how about a video for guys like me??? thanks...
Get yourself a light box with a strong LED light in 5600k or more (cardboard box whited out on the inside) get yourself photoshop, use the curve pen tool to cut out the product, place onto a perfectly white background. If you want I can show you my set up and my results. This video is overkill and expensive when compared to the high quality results one can get for a catalog shop page for a website.
Hey Tony, My name is Tony :) I've been shooting catalog jewelry for about a year and a half now for 5 jewelry stores.. I work directly for the company, not freelance, but I'm looking to break off on my own very soon. Everything I've learned has been trail and error.. You seem very proficient and knowledgeable in shooting jewelry photography. I just bought your course from RGGEDU but I need more specific information regarding jewelry. I saw a course from Photigy and they seem to a wonderful job, but honestly your work blows me away, and I love the way you teach! Are there any courses you have coming out or are you willing to teach/mentor? Regardless of the answer, I love your work and I look forwards to seeing more from you!
Well, I guess that depends on the look you’re after. But you can always use silver bounce cards or mirrors in place of one of the lights if you needed.
Oh, sorry one last question. What is the minimum wattage/second on the flash heads you would recommend and still have a great picture via focus stacking?
Hi Tony great vids. What light source do you use in the overhead soft box? Also, doesn't the Helicon Soft have an automatic method now for focus stacking? Thanks !!
Some of this is Greek to me but I'm very grateful. Taking in what I can for now. I make cremation ash jewellery and don't have a budget to hire pros, plus every piece we make is custom so I like to have photos of everything we make to show the variety. I've just "upgraded" to a Nikon B500 after my old Olympus was burgled... we were at my father in law's funeral at the time! My question is, how would you photograph European charm beads? For Pandora style bracelets. Also, lobster claw charms like Thomas Sabo style dangle charms? Thank you so much!
@@lovelyletter7460 I have a nephew and niece that were that age still young. I understand what you were trying to say. But the same thing could happen with any small toy. Another question would be if the child was supervised or not?
Can’t win. If I don’t cover gear, all I get are questions about the gear. If I do cover the gear, people complain I spent too much time explaining the gear.
I stumbled upon this video today and instantly subscribed. This video was really helpful.
Good tips on making holder for necklace, bounce cards, and watching the video the distance to wall. Thanks.
Great detailed explanation, but wow did listening to that background music for 15min tested my patience
Thanks Tony! Beautiful shot
Thank you! Awesome video. So helpful.
I kinda find it crazy when it starts with a DIY situation and have a Phase one and Foba on set.
yeah but it scaleted quickly. =) greetings from Brazil buddy.
Exact!i that is no way a do it yourself lol
@@hippiechicksmomma8691 isn't the frame DIY though? A lot of photography even at the highest levels requires tape, pins and staplers. ;) Just the nature of the game.
No Phase One or Profoto required. Use whatever camera you got, but the setup is what’s important.
I like the idea of using clamps. Thanks 😊
perfect tutorial! Will be testing this method out.
What is the other white board you are using - you are calling it sintrum or cintrem?
This is so in-depth
Thank you Tony, so helpful!
How do you keep the movement on the chain that acts like a pendulum,caused by air currents and vibration?
concrete floors in the studio to help prevent things moving around when walking, and make sure we don't build the set near any air vents.
Really loving your videos, they do help a lot!
Thank you Tony, so helpful!
Great job what else can b used to stick the rings for straight photography, for fast an many items
Perfect hints... no question! But please give me one little answer: Why jewelry is NOT shot in front of BLACK background...??? (Almost 80% of jewelry has got WHITE background) I don't understand the reason or the effect.
I can answer that! I don't know how much light theory you know but I'll try to explain it as simple as possible. Light travels from a source (like the sun or a lamp) until it hits a surface. Then it bounces off said surface and reflects parts of it onto other surfaces. (Like sunrays casting a purple shadow through a vase or reflecting onto a car, casting a bright light inside a shadow.) It's not always visible to our eyes but when working with any reflective surface, like metal and gems, any color you have in the surrounding area will reflect and affect the object your taking a photo of - even more so when you zoom in. So if you f.e. have a colored curtain covering your window or painted an accent wall in the room, it will change the light and color of the object in the photo. When you work with something as small as jewelry, which is entirely reflective surfaces, it's very noticeable. So if you were to use a black background, it will effectively alter the color of the jewelry according to the camera. For example: A golden ring on a white piece of paper it will look gold but take that same ring and put it on a black or navy blue surface and the ring's color will look almost bronze because the metal "picks up" the color around it. This is also why photography studios are usually a giant empty room with only equipment in the middle - because you don't want exterior light sources and you don't want the light to bounce off the walls. Hope that helped!
@@Mitsu92 THX... perfect answer! I understand because I know handling of light BUT I DID NOT THINK ABOUT REFLECTION MYSELF :) (Although I'm using additional exterior light)
@@ulizarembach3747 I only learned about this recently myself. I didn't think reflections would "attract" color to that extent but it makes sense when you work with something so small. Glad I could be of assistance, have a wonderful day! :D
when moving the sled for focus stacking, are you moving closer to or farther from the subject piece please?
You can do it either way, just make sure if you’re moving toward the subject that you’re not losing any of it on the edges of the frame. I usually do a test run.
I just finished my first pieces and was 'just going to take some shots' then add them online haha but I see that jewelry photography is a bit more than average photography
Do you prefer Rosco over savage heavy? how thick the diffuser and how many stops it cuts? thanks...excellent video.
Keep Killing it!! Awesome video
Good tips. I'm trying to do this all on my own and learning as I go along. I can't afford all this equipment so I'm improvising a lot of things. I spent most of my cash on a Canon T6i (may not be a pro camera but I figure it's how one uses a camera), a new laptop because the old one died; the cheapy items were the two lamps from Target and two 500W lamps that last only 60hours. And lastly, a DIY lightbox from a nutribullet box.
Is it possible to avoid image stacking by finding the sweet spot between the ISO, apature opening and exposure time do the depth of field won't be that much of an issue? I imagine when there's a gain on one factor, there's a loss in another. But right now I feel that rail thing won't be in my budget.
lol you don't need all this ridiculous equipment. Jewelry photography ALWAYS requires post processing. You're better off learning to master that (since it's free to do and only requires a computer) and just get a decent sharp photo of the jewelry and use focus stacking to get it all perfectly in focus. Photoshop has an easy way to just load a bunch of photos and automatically focus stack them.
I loved the end results!! But for a guy like me who would like to get that kind of results in a "home studio" is pretty much impossible. Especially since I don't have that kind of equipment. I'm trying to photograph jewelry for online websites... Ebay, Etsy, etc. Using a Nikon D750 with light boxes and a photo tent. The issue is... keeping the whole subject in FOCUS with the proper lighting!! What a pain!!!
TONY... how about a video for guys like me???
thanks...
Get yourself a light box with a strong LED light in 5600k or more (cardboard box whited out on the inside) get yourself photoshop, use the curve pen tool to cut out the product, place onto a perfectly white background. If you want I can show you my set up and my results. This video is overkill and expensive when compared to the high quality results one can get for a catalog shop page for a website.
Tony Does the hot glue hurt the jewelry at all? Does it leave a residue?
2 year olds and marbles dont mix!
What do you call that , when you cut a hole for your camera on the paper so no black comes out
It’s commonly called camera side diffusion. I refer to it as a glory hole.
Could you please list the softwares you used for retouching? Thank you.
Please spell the name of the white board you are using to bounce light onto the product. I cannot tell from your pronunciation. Thanks
Sintra
this is fantastic
Do you take lots of different shot of the piece, at a different focus and mix it together after to have to all thigs sharp?
Great video, top class work!
one imp Q , are you using any continuous lighting during this shoot ? or all flashes
These were strobes.
Hey Tony,
My name is Tony :) I've been shooting catalog jewelry for about a year and a half now for 5 jewelry stores.. I work directly for the company, not freelance, but I'm looking to break off on my own very soon.
Everything I've learned has been trail and error.. You seem very proficient and knowledgeable in shooting jewelry photography. I just bought your course from RGGEDU but I need more specific information regarding jewelry.
I saw a course from Photigy and they seem to a wonderful job, but honestly your work blows me away, and I love the way you teach! Are there any courses you have coming out or are you willing to teach/mentor?
Regardless of the answer, I love your work and I look forwards to seeing more from you!
Beauty Embraced b
If you had only 2 lights instead of 3, which one would you not use?
Well, I guess that depends on the look you’re after. But you can always use silver bounce cards or mirrors in place of one of the lights if you needed.
Oh, sorry one last question. What is the minimum wattage/second on the flash heads you would recommend and still have a great picture via focus stacking?
@@tonyroslund Thank you so much Tony - very helpful.
does the glue come off easily? I can't scratch or damage my clients jewelry
Hi Tony great vids. What light source do you use in the overhead soft box? Also, doesn't the Helicon Soft have an automatic method now for focus stacking? Thanks !!
@@tonyroslund Thank you so much, Profoto flash heads all the way then, and yes, I believe the Helicon Pro software does it automatically.
Some of this is Greek to me but I'm very grateful. Taking in what I can for now. I make cremation ash jewellery and don't have a budget to hire pros, plus every piece we make is custom so I like to have photos of everything we make to show the variety. I've just "upgraded" to a Nikon B500 after my old Olympus was burgled... we were at my father in law's funeral at the time! My question is, how would you photograph European charm beads? For Pandora style bracelets. Also, lobster claw charms like Thomas Sabo style dangle charms? Thank you so much!
What Camera do you use?
Hey Tony. This is fantastic! Thank you!! Do you have any tips on how to photograph rings please?
+Tony Roslund Photography + Motion that's awesome! Thanks so much! 💪👍😍
Hi Tony
Thanks for the hard work
i was wondering about the price for taking pictures to jelwelry stores??
nice👏🏻👏🏻👏🏻
What was the name of the small boards you were using for bounce? The ones you said were whiter than foam core? Sounded like censure?
Not even youtube's auto-generated captions, or 15 google searches could answer this question. Censure, Sentra, Century, Center ? Who knows
Sintra PVC board!
Thank you, Tony!
Thank you for this helpful video.
Thank you
so much info.. thank u .. but that music on the loop ( woooo woooo woooo) is hard to bear
Monstro!
Hey Tony, really good stuff! But..what's the hurry? You said too much within one breath......
gold
thanks a lot
Thanks much....
Hold up! Why is a 2 year old playing with marbles?!
It’s cool. Those are the ones she didn’t swallow.
Marbles are awesome why not? 🤷🏼♀️
Facebook Queen - have a 2 year old much?
@@lovelyletter7460 I have a nephew and niece that were that age still young. I understand what you were trying to say. But the same thing could happen with any small toy. Another question would be if the child was supervised or not?
YOU KNOW NOTHING JON SNOW
This is a WASTE OF TIME YOU HAVE THOUSANDS WORTHEQUIPMENT. YOU DON'T NEED THE FANCY CAMERA TO TAKE A
GOOD SHO
Agreed. So why is it a waste of time? The technique I show doesn’t require the equipment I use.
Apologizes for daughter making noise playing in the background and then proceeds to play very annoying music throughout the entire video. 🙄
Omg ditch the music. Great otherwise
background music is totally bs
Glad you like it! LMK if you want a link to download it!
This is just advertising.
Roslund | MacKenzie For all the products he just happened to mention.
Roslund | MacKenzie I understand what you are saying. If it wasn’t intentional to promote these products then I got it wrong. Jeff
Too much time on too expensive gear, too little time on technique.
Can’t win. If I don’t cover gear, all I get are questions about the gear. If I do cover the gear, people complain I spent too much time explaining the gear.