TIPS TO REPAIR A RECORD WITH SKIP OR LOOP - Vinyl Community

Поділитися
Вставка
  • Опубліковано 27 лис 2024

КОМЕНТАРІ •

  • @gearhead388analogger3
    @gearhead388analogger3 5 років тому +69

    This man is a mad scientist maestro. Love all his brilliance

    • @XjunkieNL
      @XjunkieNL  5 років тому +5

      Haha, I would love to be a mad scientist. And have the hair that goes with it :) Like Doc from Back To The Future. Cheers. /Paul

  • @jamesreid9008
    @jamesreid9008 4 роки тому +7

    Was on the verge of returning my record player along with the scratched records. I watched your video and the fix WORKED. No longer returning it, thank god for the internet!

    • @XjunkieNL
      @XjunkieNL  4 роки тому

      Hey James. Great feedback! Happy to hear you could sort out things, and are back in the vinyl business :) This hobby can be so much fun, but nothing is worse as a skipping record ruining the experience. Cheers, /Paul

  • @BoshMind
    @BoshMind 6 років тому +67

    If it weren't for you, I would have bought another copy of the empire strikes back soundtrack for 70 dollars!
    THANK YOU!

    • @XjunkieNL
      @XjunkieNL  6 років тому +5

      That is awesome, man. Happy to hear you were able to save this copy. Cheers. /Paul

  • @Tivorl
    @Tivorl 6 років тому +12

    This is the first video on YT about this problems, that is so good explained, thank you, man!

    • @XjunkieNL
      @XjunkieNL  6 років тому

      Happy to share and show how I try to fix these kind of problems. Thanks for watching. Cheers. /Paul

  • @graydad5031
    @graydad5031 6 років тому +18

    Paul you are an absolute STAR Thanks to you i have just fixed my mono Beatles White Album that had two skips right at the beginning off USSR Now gone XXXXX i would kiss you if i could. Keep up the good work. STAR X

    • @XjunkieNL
      @XjunkieNL  6 років тому +2

      That is great to hear! Another record saved. And what a fantastic record to fix. Must have been a bit nervy to do it :) Thanks for the comment. Cheers. /Paul

  • @makkamccann
    @makkamccann 3 роки тому +4

    Found this video today. I have recovered 2 looping scratches on 2 LP's by using a secondary cartridge. Thanks mate! :)

    • @XjunkieNL
      @XjunkieNL  3 роки тому +1

      Hey Neil. Awesome to hear two more records are saved. Great job :) Must be satisfying to have them fix, Thanks for the comment. Cheers. /Paul

    • @makkamccann
      @makkamccann 3 роки тому

      @@XjunkieNL You have no idea how happy I was to save them. I have a couple of others to play with next. :)

  • @EdgarAndEdgar
    @EdgarAndEdgar 4 роки тому +1

    thank you so much for this advice. I waited two months for a record that I had been looking for forever to get to me from the other side of the world, but the seller took it out of its sleeve and put it on top inside the package... I scratched whilst cutting the tape on the package...... I was furious....... but this seems to be working now, thank you!!

    • @XjunkieNL
      @XjunkieNL  4 роки тому +1

      Sorry to hear it got scratched. That must have been a major bummer after waiting for it so long. Happy to hear this trick is working for you. It's great to hear these different comments. Another record saved :) Thanks for sharing and watchting. Cheers. /Paul

  • @stephenmkeer
    @stephenmkeer 5 років тому +23

    This video has taken record cleaning to a whole new level,amazing!👍

    • @XjunkieNL
      @XjunkieNL  5 років тому +2

      Thanks, man! We do any and everything to save vinyl :) Cheers. /Paul

  • @mikefinney423
    @mikefinney423 3 роки тому +4

    Decades ago, the owner of a record store where I worked showed me this technique with a small microscope, toothpick and sewing needle. Other than those items,, a steady hand and patience are all that's necessary to repair a skip or otherwise compromised groove.

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hi! Those old record store owners know all the tricks :) The best trick to remove price tags I learned from a record store owner. Thanks for watching. Cheers. /Paul

    • @wennerholmphoto9860
      @wennerholmphoto9860 2 роки тому

      @@XjunkieNL what was the trick?

    • @XjunkieNL
      @XjunkieNL  2 роки тому +1

      @@wennerholmphoto9860 You have to watch my video, 3 ways to remove price tags - quick and easy :) /Paul

  • @RobertsRecordCorner
    @RobertsRecordCorner 4 роки тому +3

    This was great. I was able to fix the "loop" in my recently acquired 1959 copy of Miles Davis' "Kind of Blue." Now it skips a bit, but is playable. Not a bad deal, $29 for a 61-year-old mono copy of the biggest-selling jazz album! Thank you.

    • @XjunkieNL
      @XjunkieNL  4 роки тому

      Hi Robert. Great to hear another success story! In a strange way nothing beats an original, crackles or not. Cool record to add to the collection. Thank for the comment. Cheers. /Paul

    • @themelodyman1
      @themelodyman1 4 роки тому

      I hve a single 45'..little split..so you can hear a bump noise for a few seconds.Ive heard it Can be fixed.Can u help????? Desperate...yep.

    • @XjunkieNL
      @XjunkieNL  4 роки тому +1

      Hey Adam. I've only little experience with fixing it. I used superglue at the edge, this after making the effect of the split minimal. It's still audiable. I you find something that works better, let me know. Good luck. Cheers. /Paul

  • @BlueSky...
    @BlueSky... 2 роки тому +1

    I have been able to fix 11 skips and 1 loop largely based on your technique using a DJ stylus. Every attempt on vinyl LPs has been successful thus far,.

    • @XjunkieNL
      @XjunkieNL  2 роки тому +2

      Awesome to hear, man! More vinyl saved :) Ones you get the hang of it, you can almost predict, if you will be successful. It seems you are getting pretty experienced. Thanks for the comment. Cheers. /Paul

    • @BlueSky...
      @BlueSky... 2 роки тому +2

      @@XjunkieNL I owe it all to you. Tnank you!

  • @cyclohexane9295
    @cyclohexane9295 4 роки тому +11

    I fix loops with a high percent of success by putting more weight on the stylus AND PLAYING THE RECORD BACKWARDS. For this you have to unmount the turntable's belt and push the platter backwards by hand. Also, increase the speed quite a lot. The reason why there's a loop is that the groove is actually broken and deformed-fused with the next groove. The way to straighten that out is to attack the grove from ahead with the stylus to separate the two grooves that have become fused together.

    • @XjunkieNL
      @XjunkieNL  4 роки тому +3

      Hi! Thanks for sharing your method. Great to hear you have success with it, and fix the loop. In a way it's similar to the one demonstrated, with force we try to separate the two groove again. I'm a little hesitant using much speed, well at least the start. But I guess it speeds things up. Thanks again for sharing an alternative way. Cheers. /Paul

    • @cyclohexane9295
      @cyclohexane9295 4 роки тому

      @@XjunkieNL. You're welcome. And if that fails, then magnifying glass and sowing needle is the last resort.

    • @KakanSarkar
      @KakanSarkar Рік тому +1

      Hi Cyclo Hexane, I too use the method that you mentioned and find it with high rate of success and ease.

  • @coolcat1813
    @coolcat1813 4 роки тому +3

    good to see folks using the Nagaoka MP110 cartridge. Great sound, great value.

    • @XjunkieNL
      @XjunkieNL  4 роки тому +1

      It's amazing value for the money, especially if you consider only a needle change is needed to make it new again. Thanks for watching. Cheers. /Paul

    • @coolcat1813
      @coolcat1813 4 роки тому +1

      @@XjunkieNL Indeed, I am also very pleased with the MP110, after Shure discontinued its cartridge business. Cheers

    • @XjunkieNL
      @XjunkieNL  4 роки тому +1

      Still puzzles me what Shure was thinking. It had the right mix of features. /Paul

    • @CharlesTonkin-v1w
      @CharlesTonkin-v1w 4 місяці тому

      Same here, I haven't broken out the AT440Mla after watching HiViNWYS opinion

  • @ricefieldrecords
    @ricefieldrecords 2 роки тому +4

    I use a “Kenko Do Nature STV-120M” pocket microscope from Japan. It is 60X - 120X, has a bright LED, and has a base opening that will allow for a sharpened wooden toothpick to enter the working area. It is completely counter-intuitive experience because through the scope, you are viewing the problem area upside down and right is left. It takes a lot of practice to do. I put a black mark on the toothpick approximately 1 cm from the tip, as this shows me the approximate area the tip will hit the working area. A metal needle is impossible to use because of hand shaking. A wooden toothpick is gentler and more forgiving because you often have to go over the area repeatedly. Often times, I am able to remove a piece of foreign matter that hand record washing was unable to remove. Perhaps if I had an ultrasonic washer, it would have removed all water soluble debris. I agree sometimes it is simply impossible to locate the area of a loopback and only using a different stylus as Paul shows in this video can repair the loopback. Many people just say, “replace the record”, but some pressings are irreplaceable, so this is a last resort. Note: UA-cam is not allowing me to post a link to the item on Amazon.

    • @XjunkieNL
      @XjunkieNL  2 роки тому

      Hi Michael. Sorry for my late response. I had completely missed your comment. Thank you for sharing your experience. I look up the mini microscope. Looks good, expecially with the little cut out. The way you are doing it, sounds as a very controlled way to remove dirt. My personal experience with ultrasonic record cleaning, it's not strong enough to remove dirt that is stuck in the groove. I love to rescue a record this way. Even if a replacement is maybe easily available, the feeling of fixing it, is the best :) Have a sunny Sunday. Cheers. /Paul

    • @marcb8874
      @marcb8874 Рік тому +1

      merci de votre experience , j'ai une ultra son mais je n'ai pas eu le temps de faire du nettoyage , vu la largeur d'un sillon je suis très surpris qu'on arrive avec un cure dent a enlever les grosses rayures plus

  • @leon9021
    @leon9021 5 років тому +5

    What ive used is also a microscope and a sweing needle attached to a toothbrush.
    I try to not only repair loops and skips but also pops. Depending on how deep the scratch is this can work. But it takes a lot of time.

    • @XjunkieNL
      @XjunkieNL  5 років тому +2

      Hey hey. You are one step ahead of me, Leon. That will be part II :) At the moment I experimenting with different ways to see what works best. It's very satisfying fixing a pop. As you wrote it takes time and a little bit of luck. Cheers. /Paul

    • @leon9021
      @leon9021 5 років тому +1

      @@XjunkieNL Will await the video, looking forward to it!

  • @Muzik_head
    @Muzik_head 2 роки тому +2

    Peace Paul... thanks for this one. I was able to fix a loop today by carefully guiding the stylus at the skip point. Stay solid.

    • @XjunkieNL
      @XjunkieNL  2 роки тому

      Hi! Great to hear it worked. Another record saved :) Easy does it when trying to fix a skip. Thanks for the comment. Cheers. /Paul

  • @MetalTheologian
    @MetalTheologian 4 роки тому +1

    Dude. You're a god. I got a rare record in the mail today (from Argentina) and was super bummed about a loop... until I took your advice. Thank you!!

    • @XjunkieNL
      @XjunkieNL  4 роки тому

      Hey Aaron. Success! Cool to hear it worked. Always great to see another record saved. You didn't try the sandpaper trick again :) Cheers. /Paul

    • @MetalTheologian
      @MetalTheologian 4 роки тому +1

      @@XjunkieNL Oh man, the record I tried the "sandpaper trick" on was *hopeless* !

    • @XjunkieNL
      @XjunkieNL  4 роки тому

      @@MetalTheologian I remember thinking, that could work, makes sense to remove the top layer. Good thing you warned to not do it :)

    • @manuelmoy4797
      @manuelmoy4797 3 роки тому

      Which record you got?
      I got one from argentina too a new record and is skipping in every song

    • @MetalTheologian
      @MetalTheologian 3 роки тому

      @@manuelmoy4797 It was a copy of the first Rata Blanca LP.

  • @davidjohnson-io6kp
    @davidjohnson-io6kp 5 років тому +12

    Excellent tutorial am ordering my clip on microscope now ....many thanks

    • @XjunkieNL
      @XjunkieNL  5 років тому

      Hi David. Thanks for the feedback. Hope the microscope arrives soon. Although it usually takes a little time to arrive. Good luck :) Cheers. /Paul

  • @mikefinney423
    @mikefinney423 3 роки тому +1

    It got better with each subsequent play on the DJ needle. I also use the wooden toothpick and sewing needle method with great success.

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hi Mike. Thanks for the comment. I can imagine it getting better each time you play the record. The extra weight must certainly help to fix the damage to the groove a little. Have a nice Sunday. Stay safe, stay funky. Cheers. /Paul

  • @Amberstargazerofearth
    @Amberstargazerofearth 2 роки тому +1

    Nice work! I agree, the toothpick/needle must go backwards only to fix the looped groove. And yes, microscope is very necessary for inspection

    • @XjunkieNL
      @XjunkieNL  2 роки тому

      Hi! Thanks for the comment. If you're left handed, makes it more easy :) Cheers. /Paul

    • @Amberstargazerofearth
      @Amberstargazerofearth 2 роки тому +1

      @@XjunkieNL You wouldn't believe me, but I'm really left handed )

    • @XjunkieNL
      @XjunkieNL  2 роки тому

      Hahah, great! :)

  • @1977raider
    @1977raider Рік тому

    He's a record humanitarian! Thank you friend!

    • @XjunkieNL
      @XjunkieNL  Рік тому +1

      Hey John. Thanks! The more records we can save, the better the world will be :) Cheers. /Paul

  • @johnbellamy3406
    @johnbellamy3406 6 років тому +1

    Paul, you should wright a book. Tips like this are fantastic. I have never tried using a wooden tooth pick before but instead a metal needle.... and made the problem worse. In this day and age I think someone could/should invent a device or machine to solve these problems. It was almost painful watching you use your expensive turntable and fine motor skills to manually fix the loop. If I were an entrepreneur, I would develop a Precision machine that could fix these type of glitches and install them in every library or used record shop and charge 2 Euros per fix. Thanks for making this video. Cheers

    • @XjunkieNL
      @XjunkieNL  6 років тому

      Hey John! If I wasn't listening to vinyl all the time, I probably had the time to write a Haynes Workshop Manual on vinyl repair :) Working with a metal needle you're definitely taking a higher risk. If you are going to give the tooth pick a try, only use light pressure. To be honest I've been thinking if it is possible to make a mechanical device. Not an easy task. Great to hear you like the video. Cheers. /Paul

  • @larryshaver3568
    @larryshaver3568 6 років тому +1

    This is an excellent suggestion . looking at the groooves in question is something I have done several times

    • @XjunkieNL
      @XjunkieNL  6 років тому

      Hey Larry. Thanks for the comment. First thing is, like you did, look at the groove and try to get an idea what is happening in the groove. I often change my tactic on what I see. Sometimes, for example as in the video, the tooth pick method would make the problem worse. Good luck if you are going to try it. Cheers. /Paul

  • @blackmore1030
    @blackmore1030 Рік тому +2

    If your turntable is capable of switching directions, you can fix skips by playing that section backwards. The reason is that sometimes a particle can be swept away only from the opposite direction.

    • @XjunkieNL
      @XjunkieNL  Рік тому +1

      Hi! Thanks for the comment. It is a great tip and I wished I included it in the video. Sometimes the simple back and forth movement can solve the problem. Cheers. /Paul

  • @clutchnshift1
    @clutchnshift1 Рік тому

    Paul, very nice demo on loop removal.
    Thank you!

    • @XjunkieNL
      @XjunkieNL  Рік тому

      Hi! Hope it helped and saved another record :) Cheers. /Paul

  • @Genghis-Khan121
    @Genghis-Khan121 4 роки тому +1

    Well worth watching , seen this procedure done a few times now with fancier magnification gadgets but the phone and the scope he uses here are just as good as expensive gadgets as you can see it’s mainly down to know how , i personally have learned all this a little late as I have just sent some expensive records to be cleaned and fixed and now I realise hoe they are doing it all but unfortunately I paid a tidy Sumerian’s of money , but at least I know now how to do this my self , big thanks to this guy , ps, I used to live and work in Amsterdam great city from U.K. myself 👍

    • @XjunkieNL
      @XjunkieNL  4 роки тому +1

      Hi Paul. Thanks for the comment. Always nice to get positive feedback. As you said, a little know how gets you a long way. For sure next time you can look into doing it yourself. Or at least check what is the root cause and decide what you're going to do. If so, most important is to do it slow and take your time. Amsterdam is a crazy city :) Great city for finding obscure second hand vinyl. Cheers. /Paul

    • @Genghis-Khan121
      @Genghis-Khan121 4 роки тому +1

      @@XjunkieNL your welcome my friend , I got my records delivered back home the guy who did the work explained how he managed to get 3 out of four records sounding good enough again , but also said sometimes you can get a loud pop and crackle to sound very low compared to how loud it was before he did the work and also that you can never really get rid of it completely got to say though I really had to listen hard to notice it after he repaired the records as you say it’s patience and time that can determine the outcome!!

    • @XjunkieNL
      @XjunkieNL  4 роки тому

      Sounds as he did a great job, getting 3 out of 4 good again. I myself am already happy with 1 out of 2 :) It's a though job, especially doing it for others, as you don't know at the start if it will work out okay. /Paul

  • @sup3rmahn583
    @sup3rmahn583 6 місяців тому

    THANK YOU FOR THIS!!! i fixed one of my black sabbaths loop problems with adding the weight to the stylus!!!!

    • @XjunkieNL
      @XjunkieNL  2 місяці тому +1

      Hi! That is great news. Another vinyl record saved. Now play it loud! :) Cheers. /Paul

  • @vinylrichie007
    @vinylrichie007 6 років тому +2

    Good video. I've been able to fix skips and loops but not always successful. I will try your hints.

    • @XjunkieNL
      @XjunkieNL  6 років тому +1

      Thanks! Yeah, there is probably not one golden method. Also with this method the succes rate isn't 100%. What I like about it, it usually doesn't make the problem worse. With my previous method I sometimes destroyed a record. Hope you have success when you try it out. Cheers. /Paul

  • @helmutdiggy6874
    @helmutdiggy6874 6 років тому +3

    Great work ! I was hoping you would switch out the cart !
    I do the same thing but I never adjusted the tracking weight.
    I will definitely pick up one of those lighted scopes

    • @XjunkieNL
      @XjunkieNL  6 років тому

      Nice to see you dropping by. Switching the cart makes the job much easier. Fun to hear you have the same tactics. Tracking at maximum and anti skate at minimum helps, especially at the start. All the best. /Paul

  •  5 років тому

    I discovered using Bamboo skewers a few years ago and the technique I developed works 100% of the time for both types of skips or any other type of groove wall damage. I started with hard material such as steel pins..they do work but they cause further visual damage.

    • @XjunkieNL
      @XjunkieNL  5 років тому +1

      Thanks for the comment. I also have a strong preference for the bamboo skewers. The chances of damaging the vinyl are limited. Hahah, finally I know they are called bamboo skewers, I had no clue ;) Cheers. /Paul

    •  5 років тому

      @@XjunkieNL Yeah tons of folks in Canada use them for barbequing stacks of veggies and meat ..also called "Shish Kabob" haha They are less expensive to buy than a pack of toothpicks..ironically.

    • @XjunkieNL
      @XjunkieNL  5 років тому

      One on one translation we call them Satay Stick. And, yes, we also use them for bbq :)

  • @DJbernardo1320
    @DJbernardo1320 2 роки тому

    I have previously used a needle to break the loop as well. 😊 I took the risk without using magnifying glass. I am jus lucky that it works 😊

    • @XjunkieNL
      @XjunkieNL  2 роки тому +1

      Hello Bernard. Sometimes you need to be lucky :) I have had mixed results. Cheap records it works, more expensive records it doesn't. Could also be I'm shaking more with expensive records ;) Thanks for watching. Cheers. /Paul

  • @Paneeks1960
    @Paneeks1960 6 років тому +8

    Hi Paul,
    I think that I understand what you did here. You kind of forced the tracking so it undo's the skip part. Then you play it again a few times until it smooths out? Sorry but sometimes it takes me a little explanation because I do not always catch it while watching the video portions. Thanks for sharing this trick. You are always thinking outside the audiophile box and I think that it is wonderful that you do so~
    Rob/Boston

    • @XjunkieNL
      @XjunkieNL  6 років тому

      You got it, Rob. Basically I'm making a second scratch that will bypass the first. Next, as you wrote, I try to smooth it out a little. If you are lucky the second scratch is very close to the original groove and won't give a skip. Happy to share these little tips and save some vinyl records from being trashed. All the best. /Paul

  • @FlipSideCT
    @FlipSideCT 6 років тому +1

    Excellent job Paul......very informative and interesting. So you are still manually forcing to realign the groove.....but that heavy duty DJ is the trick. Thanks Steve

    • @XjunkieNL
      @XjunkieNL  6 років тому

      Hey Steve. I don't exactly know what is happening in groove, but indeed I'm manually forcing a new groove. First with max force, and slowly going back to normal. As you state the DJ cartridge makes the job more easy. All the best. /Paul

  • @professorabronsius
    @professorabronsius 8 місяців тому

    I did the toothpick trick and worked smoothly!!! Gracias from Chile 🇨🇱

    • @XjunkieNL
      @XjunkieNL  8 місяців тому

      Hi! Great to hear from Chile. Happy to see you had success with this trick. Greetings from the Netherlands :) Cheers. /Paul

  • @GW00d5
    @GW00d5 Рік тому

    You’re a legend, just fixed my first pressing SGT. Pepper!!! ❤

    • @XjunkieNL
      @XjunkieNL  Рік тому

      Hi Gareth. Thanks, man! Happy to hear another record is saved. And what a record to fix. Enjoy the music. Cheers. /Paul

  • @thestevestandardanthinggoe4170
    @thestevestandardanthinggoe4170 5 років тому +3

    So I've been doing this to my records and it gets better each time and I've actually perfected one and I'm glad i was in the right direction

    • @XjunkieNL
      @XjunkieNL  5 років тому +2

      That's awesome. Got already some comments were people have successfully rescued a record. It's a great feeling getting perfect again. Thanks for the comment. Cheers. /Paul

  • @allenholdway8683
    @allenholdway8683 4 роки тому +1

    Okay I’m going to have to tryout this great idea, all though I need a DJ cartridge needle. I try the other ways first. Thanks again.

    • @XjunkieNL
      @XjunkieNL  4 роки тому

      Hi again Allen. You can use any cartridge, but you have to be aware that the high tracking force can damage the suspension and stylus of the cartridge you use. In general DJ cartrigdes are more robust. Good luck. Cheers. /Paul

  • @robertglover3911
    @robertglover3911 3 роки тому

    Brilliant, I have a copy of Jimmy Witherspoon "Hey Mrs Jones" that jumps horribly with a scratch. Will give this method a go. Thank you

    • @XjunkieNL
      @XjunkieNL  3 роки тому +1

      Hi Robert. Hope the video helped and you could save the record. And Mrs Jones is spinning jump free :) Cheers. /Paul

    • @robertglover3911
      @robertglover3911 3 роки тому

      @@XjunkieNL Thanks pal

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Does this mean you were able to fix the record? That would be great news :) /Paul

  • @dixielandfarm
    @dixielandfarm 6 років тому +1

    Great demo, Paul. I have had moderate success with a toothpick, but only once with a sewing needle fixing a deformed groove. If I had a DJ cart setup, I think I would do much better! I'd even say putting a penny or a quarter on the headshell may help with that downward force.

    • @XjunkieNL
      @XjunkieNL  6 років тому

      Hey Kris! Good to hear you like it. Being able to simply switch cartridges is a real benefit for doing this. Tracking force is something to play with. A penny could work for sure. Although I give the preference of pushing the headshell a little to the inside. Me too, very little success with a sewing needle. All the best. /Paul

    • @CharlesTonkin-v1w
      @CharlesTonkin-v1w 4 місяці тому

      @@XjunkieNL I used a BSR mini TT to play loop or skipping records on, I put force near the pivot gimbal lot of manual AS before the skip and opposite for loop

  • @f3rfra
    @f3rfra 4 роки тому +1

    Thanks for the thorough explanation! I have yet to try these methods, doing my research first, but I feel confident after watching your video. Also thanks to your video I've discovered and I'm now listening to Ofege :) I'll come back and edit the comment to share my experience after cleaning the record.

    • @XjunkieNL
      @XjunkieNL  4 роки тому +1

      Hi! Thanks for stopping by. Maybe the best tip is to do it slowly. Take your time fixing it. Ofege did some great albums in the seventies. Hope you dig the music and good luck :) Cheers. /Paul

    • @Camiliostation
      @Camiliostation 3 роки тому

      Found out that the song is: Ofege - Contraband. Suprisingly not to find on spotify and a hard record to come by. Thanks for sharing anyways!

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hahah, Camiel. Very good! Best way to not get in trouble with copyright infringement is to use a song nobody knows, but still sounds cool :) Cheers. /Paul

  • @nicksvinylbutty5488
    @nicksvinylbutty5488 5 місяців тому

    Very well demonstrated/explained,it all looks easy enough to do 👍👍👍

    • @XjunkieNL
      @XjunkieNL  2 місяці тому

      Hi Nick! For sure you can try it yourself. Not much risk it goes wrong. Although be aware vinyl can be fragile. Best of luck. Cheers. /Paul

  • @strangelysatisfying1085
    @strangelysatisfying1085 3 роки тому

    Yes all the techniques here work well. Another great reason to have a 1200 - you can do this type of repair easily on it.

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hi. The SL1200 is a legend! Thanks for watching. Cheers. /Paul

  • @Lesliereyes671
    @Lesliereyes671 3 роки тому

    Thanks for tip about the stylus pressure, change my mat (cork) that was a tad thicker and it did the job, loop is gone from that but a bit sound of impurities but I'd rather have that than looping 👍

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hey Leslie. Great to hear another record is saved. Good job! :) Hahah, I know the feeling, you always want more, but for sure this beats a loop. Maybe over time it will get a little better. Thanks for the comment. Cheers. /Paul

  • @hippydjkit9913
    @hippydjkit9913 6 років тому

    Eureka Paul........... You are our modern VC Archimedes ...........thanks for the tips............ Much appreciated..............ohh the Hendrix inspired guitar solo is stellar........... Great find..........

    • @XjunkieNL
      @XjunkieNL  6 років тому

      Hahah, I will put that on my business card :) Luckily I could fix, would have been annoying to have the loop in the middle of the guitar solo. All the best. /Paul

  • @paulc5358
    @paulc5358 5 років тому

    Paul Another good video I bought a pocket scope a little bigger then yours from I think another video of yours & that carbon fiber cleaning brush you talked about, One think I'ed be careful about is pushing on the head shell the diamond tips are just glued in there & they could come off. so I would use one that you don't care about that is just my opinion> But, I do like that tooth pick used that's an Idea. I recently bought an ultrasonic cleaning machine it seems to be doing ok I want to try and build Loricraft record cleaner this summer. From one Paul to another & from 1 invented to another Nice work!!!

    • @XjunkieNL
      @XjunkieNL  5 років тому

      Hey Paul! Nice to hear again from you. Cool to hear you also got a little microscope. Handy little toy! Thanks for the warning. It's part of the reason I use a DJ needle. They seem very sturdy, and if something goes wrong it's possible to exchange only the cantilever with stylus. An ultrasonic cleaner is the way to go. Till now the best way I've found to clean records. My past record cleaner was a DIY Loricraft, but it can't compete with the results I get from the ultrasonic cleaner. Or it must be very dirty records. All the best. Cheers. /Paul2

  • @Biosintech67
    @Biosintech67 5 років тому +1

    You are very passionate of your hobby and I respect that. Thank you for your tutorial it was very useful.

    • @XjunkieNL
      @XjunkieNL  5 років тому +1

      Thanks for the comment. Hope this video is helpful for you. Vinyl is forever :) All the best. Cheers. /Paul

  • @Ting33s
    @Ting33s 3 роки тому

    I once fixed a loop by gently pressing down on the tonearm a little before the spot and it worked.

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hey! I can image that works. But be careful not to overload the suspension of your cartridge. Others have been also succesful adding a penny to the headshell to increase the weight. Thanks for the comment and sharing your experience. Cheers. /Paul

  • @mschool
    @mschool 4 роки тому +2

    I tried this method today. I used a used an MM cart with elliptical stylus. I set the weight at 3 grams, and increased the weight with some coins. The track played successfully with the weighted stylus. I tried it a few times. Thinking I had the problem solved, I switched to my AT VM540ML microline cartridge at 2 grams, and the loop reappeared as if nothing changed. I'm discouraged.

    • @XjunkieNL
      @XjunkieNL  4 роки тому +4

      Hi Michael. Sorry to hear it didn't work out. It sounds as if you were very close to fixing it. I would suggest to give it at least ten more spins with the MM cartridge. Then reduce the wait and see if it is fixed with MM at 3 grams. It's best to do this method slow and in steps. Take your time. Good luck. Cheers. /Paul

  • @justinhughes4119
    @justinhughes4119 3 роки тому

    A lot of great info in your video. Much appreciated

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hi Justin. Thanks! Hope it helps to fix a record :) All the best. Cheers. /Paul

  • @FatCityVinyl
    @FatCityVinyl 6 років тому

    Another great demonstration from the science instructor of the VC ;-) That's a technique I've not seen or heard of before - think I have heard the toothpick method mentioned before. Those African records are definitely worth rescuing. All the best, take care!

    • @XjunkieNL
      @XjunkieNL  6 років тому +1

      Hahah, yes, the science dude talking vinyl or the vinyl dude talking science ;) Probably the last one fits me best :) Would be great if we can save a few records from being trashed. Especially true for all those records that had a hard life in Africa, Jamaica or India. All the best. /Paul

  • @jakemurphy9536
    @jakemurphy9536 4 місяці тому

    Excellent! Many thanks for a really useful video. Much appreciated.

    • @XjunkieNL
      @XjunkieNL  2 місяці тому

      Hi Jake! Thanks for the comment. Always nice to get positve feedback. All the best. Cheers. /Paul

  • @greenebear2267
    @greenebear2267 3 роки тому

    well i have a LZ2 robert ludwig hotmix,,i used a sledgehammer to fix the scratches

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      LOL...yes, that's the onlyway to fix it :) Or I've read so, get another turntable to play this hot record. Thanks for watching. Cheers. /Paul

  • @BlueSky...
    @BlueSky... 3 роки тому +1

    Outstanding! I will be buying a DJ cartridge for this very purpose.

    • @XjunkieNL
      @XjunkieNL  3 роки тому +1

      Thanks! I tried different cartridges, but for some reason a DJ cartridge works the best. If you get one with a conical tip, you can move the record back and forth. Thanks for watching. Cheers. /Paul

    • @BlueSky...
      @BlueSky... 2 роки тому

      @@XjunkieNL Thanks again for this! I was able to use your technique to fix a loop on an expensive jazz record. The stick was very stubborn, so I had to increase the stylus pressure from 4 to 6 grams and that did the trick. For a bit more control, I used a piece of wire in stead of my thumb to nudge the stylus toward the center.

  • @PCFixer
    @PCFixer 4 роки тому +1

    The DJ needle with its high tracking force is pushing DEEP into the 'virgin' unscratched part of the record and yes, effectively cutting or recutting the groove, negating the scratch. Be very careful, though...

    • @XjunkieNL
      @XjunkieNL  4 роки тому

      Hi David. Thanks for the warning. You're right, best to do it slowly and don't rush. It's easy to make things worse. Thanks for the comment. Cheers. /Paul

  • @ianocon1211
    @ianocon1211 6 років тому +2

    Great advice... I have a dark side otm pic disc from the pink floyd first xii box set with exactly same loop issue. I'll give your methodology a try. Fingers crossed 👍🏼✅

    • @XjunkieNL
      @XjunkieNL  6 років тому

      Hope it works for you. If you have the possibility try it first on a cheap records. Just to get the feel for things. Would be cool to know if you're are able to fix it. Good luck. /Paul

  • @DutchNostalgia
    @DutchNostalgia 9 місяців тому

    Je spreekt het engels wel op een zeer nederlandse manier uit. Maar dat wil niks zeggen, deze video‘s zijn supertips en ik zie in de comments dat het geweldig helpt bij de engelse kijkers. 😊

    • @XjunkieNL
      @XjunkieNL  9 місяців тому

      Waarschijnlijk niet genoeg opgelet op school ;) Gelukkig komen de tips door de vertaalslag heen. Nog een fijne zondag. Groet. /Paul

    • @DutchNostalgia
      @DutchNostalgia 9 місяців тому

      @@XjunkieNL hetzelfde gewenst. Ik ga zeker volgen!

  • @randyj420
    @randyj420 2 місяці тому

    Great tips and vid. I could use a microscope! I have used toothpicks and have tried reversing over a groove - but I was usually guessing the actual reason for the skip.

    • @XjunkieNL
      @XjunkieNL  2 місяці тому

      Hi Randy! Thanks for the comment. The miscoscope for sure helps to understand what is happening a little better. Also it helps to select the right tactic to acttack the probem :) Cheers. /Paul

  • @TapesNstuffS
    @TapesNstuffS 3 роки тому

    I had a deeper gouge and I was able to fix it but using a sewing needle and going over it manually.

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hi! Cool to hear you had success fixing it that way. For me it is still hit and miss. Thanks for watching. Cheers. /Paul

  • @marcotobadj6707
    @marcotobadj6707 3 роки тому

    When I find record that skips or loops, i use a old Stanton AL 500 (dj cart) at maximum weight and do as you do in the video; I also play backward the record several Times in the point of the issue

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hi Marco. Good to hear you're using successful the same methods I demonstrate. In the video I have forgotten to show the reserve play. Maybe next time :) Thanks for watching. All the best. /Paul

  • @triggertunes6392
    @triggertunes6392 6 років тому

    Hey Paul, cool info, I bought one of those light magnifying glass which really shows up how much is on the wax-it's amazing, I agree a Skip is much better than a loop(or stuck I call it), I'll give u technique a go with much care, I have used a rubber to rub over the problem spot which has worked couple times( but creates a scuff which leads to a small area of noise when needle passes but the main goal is the play thru) but this technique has worked less times than been successful🎯✌🏼️

    • @XjunkieNL
      @XjunkieNL  6 років тому

      Thanks for stopping by. Nice to hear you already have the magnifying glass. First step is to know what is going on in the groove. My experience with the rubber is similar. You can't use any pressure or risk damaging the other grooves. It's one of the reason I prefer to use a wet tooth pick. Let me know if you're more successful this way. Ok, next time I will call it a stuck :) Cheers. /Paul

    • @triggertunes6392
      @triggertunes6392 6 років тому

      👌, all good loop is great way to say it👌

    • @XjunkieNL
      @XjunkieNL  6 років тому +1

      Hahah, how about...it's stuck, mate ;) /Paul

  • @Henry_Crun
    @Henry_Crun 3 роки тому

    Great, great video!. Do you have any links for the telescope attachment and the DJ cartridge?

    • @XjunkieNL
      @XjunkieNL  3 роки тому +1

      Hi Henry. Thanks for watching! For the microscope you can check amazon or ebay and search "mini microscope". Several will pop up :) The DJ cartridge I'm using is a Ortofon Concorde Pro. For fixing scratches I think you can use any DJ cartridge that's available and cheap. Cheers. /Paul

  • @Sbradiganz
    @Sbradiganz 6 років тому

    Hi Paul! I’ve got a first japan press of Pink Floyd’s Wish You Were Here with a loop just after the intro of Shine on you crazy diamond part 1. I hope I’ll be able to fix it following what you showed in the video! Thank you for sharing your knowledge!

    • @XjunkieNL
      @XjunkieNL  6 років тому +2

      Hahah, you missed the disclaimer, don't try it first on an expensive record. Although I don't think much can go wrong. Just give the technique a try on a cheap record. This to get a feel how it goes. A mistake is sometimes quickly made, and with vinyl it can be permanent. Let know if you could fix the loop. Good luck. /Paul

    • @Sbradiganz
      @Sbradiganz 6 років тому

      X junkie NL thanks for the reply Paul, you’re very kind! I have a very strange issue with that record. Today I observed it with the microscope (the exact one you have, I bought it because of your videos lol) and it doesn’t look damaged but just mega dirty, so I’ll try to wash it. A very strange thing I noticed is if I bring my turntable’s anti skid to 0 (Dual CS 505-4 first gen from the 90s) it doesn’t loop and goes on perfectly. Do you have any idea why it does it?
      Greetings from Scotland,
      Simon

    • @XjunkieNL
      @XjunkieNL  6 років тому +1

      That sounds promising, Simon. Smart move to inspect the groove first. Most probably the dirt lifts the needle a little. Together with the anti skate, that forces the needle to the outer edge, makes the record loop. Setting the anti skate to zero is just what it needs to continue. /Paul

    • @wizardofdoom
      @wizardofdoom 5 років тому

      Its weird how we have the exact same LP and problem with looping on the first song

    • @XjunkieNL
      @XjunkieNL  5 років тому

      That's indeed a little weird, Matthew. This would almost suggest there was something wrong with the stamper. What a coincidence you guys have a record almost pressed at the same time. Cheers. /Paul

  • @sonja5596
    @sonja5596 3 роки тому

    hi, amazing procedure! please where to buy the microscope with the attached device at 1'20 ? thanks (please use simple english!)

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hello! Best to search on Ebay for "mini microscope". You will find many. Get the cheapest ;) Have a nice weekend. /Paul

  • @WBell-2000
    @WBell-2000 3 місяці тому +1

    Thank you so much!! It worked perfectly... TT

    • @XjunkieNL
      @XjunkieNL  2 місяці тому

      Hi! Always a pleasure to hear it worked. Another record saved! Thanks for the comment. Cheers. /Paul

  • @domingoleija3436
    @domingoleija3436 Рік тому

    Very Interesting...dear Watson

    • @XjunkieNL
      @XjunkieNL  Рік тому

      Hi again. Thanks for watching. Hope is helps to save more records :) Cheers. /Paul

  • @bubble-and-scrape
    @bubble-and-scrape 5 років тому +7

    Skips can frequently be solved by manually turning the record in the opposite direction with the needle in place. Sometimes this can even solve loops.

    • @XjunkieNL
      @XjunkieNL  5 років тому +3

      It's all about saving vinyl records :) Sometimes a simple trick can go a long way. Thanks for the comment. Have a great weekend. Cheers. /Paul

    • @tiborosz1825
      @tiborosz1825 6 місяців тому +1

      Only with a CONICAL stylus!!!!

  • @robfriedrich2822
    @robfriedrich2822 5 років тому +1

    I've seen a method yet, editing the groove and you work on a very very small groove.

    • @XjunkieNL
      @XjunkieNL  5 років тому

      Hi Rob. It's a miracle that all the music is coming from this one groove. And with a little luck it's sometimes possible to fix. Cheers. /Paul

  • @L.E.55472
    @L.E.55472 6 років тому

    OMG I LOVE THESE......hey Paul you know I do........you are just awesome........Lisa. I am a lefty

    • @XjunkieNL
      @XjunkieNL  6 років тому +1

      Hahah, great to hear you enjoy these videos, Lis. Big advantage being a lefty in the vinyl hobby :) Although it makes me wonder with which hand do you put the needle in the groove? Take care. /Paul

    • @johnbellamy3406
      @johnbellamy3406 6 років тому

      I had to smile when I read this Lis. Just heard an interview with Madeleine Albright on the radio talking about her latest book. You may want to say "I am a lefty" while you still can, if her concerns are correct. Lets hope she is not.

    • @johnbellamy3406
      @johnbellamy3406 6 років тому

      Here is the interview: www.bbc.co.uk/programmes/p06c99pt

    • @L.E.55472
      @L.E.55472 6 років тому

      X junkie NL heehee I use the right index finger 😎👋🏻

  • @simonreeves2017
    @simonreeves2017 5 років тому +1

    I spy a top combination in use here - Technics SL-1200GR with Nagaoka MP-110 😍

    • @XjunkieNL
      @XjunkieNL  5 років тому +1

      Well spotted :) You have it almost right. Cheers. /Paul

    • @CharlesTonkin-v1w
      @CharlesTonkin-v1w 4 місяці тому

      I have LP140XP with 110

  • @ChristopherClause
    @ChristopherClause 2 місяці тому

    I know this is an older video, but could you post links for the magnifying glass with the clip, please? Sorry if this link is buried in the comments!

    • @XjunkieNL
      @XjunkieNL  2 місяці тому

      Hi Christopher. No problem to ask. Easiest way is to search for "mini microscope" on Ebay. Several will will show up. Take the cheapest with a clip. Thanks for watching. Cheers. /Paul

  • @user-ug4xw7ji3b
    @user-ug4xw7ji3b 7 місяців тому

    mooie kast waar heb je die gehaald, verkoop je ook platen ben een reggae liefheber..thanks voor de youtube clip..

    • @XjunkieNL
      @XjunkieNL  7 місяців тому +1

      Hoi! De kast is van Ikea met een paar modificaties. Wie anders ;) Hij is helaas al een tijd niet meer beschikbaar. Ik zit ook op Discogs. Zelfde gebruiksnaam, alleen zonder spaties. Alleen niet veel reggae voor je. Groet, /Paul

  • @superheroj11
    @superheroj11 4 роки тому

    the trick with the toothpick helped! thanx a lot!!!

    • @XjunkieNL
      @XjunkieNL  4 роки тому

      That's fantastic to hear! Another record saved :) Thanks for the comment. Cheers. /Paul

  • @DougMcDave
    @DougMcDave Рік тому

    Could a slight warping cause a skip? I have an older record with skip on the same spot.

    • @XjunkieNL
      @XjunkieNL  Рік тому +1

      Hi Douglas. It could be. Sometimes it can be fixed with increasing the tracking force. That way the needle has a bit more weight to stay in the groove. Otherwise keep the record a week under a big pile of books. That might lessen the warp of the record. Hope it helps. Cheers. /Paul

  • @nealsausen4651
    @nealsausen4651 3 роки тому

    If I have a record that skips I just put a quarter and a nickel on the operating end of the tone arm and that does kind a grind through any skips in the grills always works for me????!!!!????!!!!????

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hi Neal. Thanks for the tip. Very similar to my approach. Probably you also noticed that after a few spins, the record gets better and better. Have a nice Sunday. Stay safe, stay funky. Cheers. /Paul

  • @Vinylly_Found
    @Vinylly_Found 6 років тому

    Hi Paul. Great video. I saw this when you posted but came back to find out where to buy the magnifying glass. Do you have a link you can send me where to buy this. I am watching on my phone so maybe that is why I cant find it. I am just starting to try and seriously fix some of my records. I recently started using wood glue and it has been working well to fix some of the pops and surface noise. Have you done this? Any negative consequences from doing this? I am guessing it is some dirt that is wedged in the groove that the glue picks up. I have an ultrasonic cleaner that a lot of times doesnt seem to help. But if i do the wood glue clean before the ultrasonic it seems to help. But my last effort will be what you showed in this video. Looking forward to clean up a few of my gems. Cheers! Jason.

    • @XjunkieNL
      @XjunkieNL  6 років тому

      Hey Jason! You can use any magnifying glass. Preferably something big,
      Sherlock Holmes style :) Cool to hear you have been using the wood glue
      method. Have been tempted to use it on my African records. Till now for
      really dirty records I use some hand scrubbing, following it up with
      ultrasonic cleaning. I'm getting good results, although I still use some
      of the tricks in the video to get even better results. Good luck
      cleaning up your records. /Paul

  • @CD-pi8xq
    @CD-pi8xq 2 роки тому

    Hi, thanks for your contribution. Couldn't find the link for the magnoscope
    Can u help?

    • @XjunkieNL
      @XjunkieNL  2 роки тому

      Hi. Easiest is to look on Ebay and search for Mini Microscope. You will find many. I choose the cheapest one :) Have a nce weekend. Cheers. /Paul

    • @CD-pi8xq
      @CD-pi8xq 2 роки тому +1

      @@XjunkieNL Cheers Paul. Be well yourself.

  • @DanteTimberwolf
    @DanteTimberwolf 3 роки тому

    Would you this work for old 78rpm records? I never thought it would happen and it finally happened... I accidentally scratched it.

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hi Dante. Sorry to hear you accidentally scratched your record. It happens to everyone. I'm pretty confident this also works on a 78rpm record. When using something like a toothpick, make sure the tip is not too sharp. Preferably it should not be able to enter the groove. Hope you get it fixed. Cheers. /Paul

  • @monster4kciliegiesullatort725
    @monster4kciliegiesullatort725 6 місяців тому

    hi, my English is not good and from Italy I wanted to ask you how you managed to solve the loop problem. Thank you very much :)

    • @XjunkieNL
      @XjunkieNL  2 місяці тому +1

      Hi! Sorry my Italian is really bad. Hope the demonstration in the video helped. Good luck. Ciao Paul (only Italian I know :)

  • @grayhalf1854
    @grayhalf1854 4 місяці тому

    I've got a record that was poorly mastered and two grooves actually touch, so it skips. I might try to fix it, not entirely sure how though! 🤪

    • @XjunkieNL
      @XjunkieNL  2 місяці тому

      Hi! That sucks. I've never been able to fix something like that. Only could turn a loop in a skip. At least the record played to the end that way. Good luck. Cheers. /Paul

  • @jlmdx
    @jlmdx 3 місяці тому

    Worked like a champ!👏

    • @XjunkieNL
      @XjunkieNL  2 місяці тому

      HI! Great to hear it worked. Another record saved! Enjoy the music without a skip :) Cheers. /Paul

  • @mymixture965
    @mymixture965 5 років тому +1

    I like your videos, great infos, thank you

    • @XjunkieNL
      @XjunkieNL  5 років тому

      Hello Wolfgang. Appreciate the positive feedback. Hope that some tips are helpful for you. Thanks for the comment. /Paul

  • @collectormk
    @collectormk 4 роки тому

    Ah shit. Ik heb weer 2 LP's waarmee de naald oversloeg of herhaald. Gelukkig dankzij jou Tutorial weet mijn vader nu hoe je deze kromme groefen kan repareren.

    • @XjunkieNL
      @XjunkieNL  4 роки тому

      Dat is pech! Maar kan gebeuren. Je pa heeft het er maar druk mee :) Succes! Groet. /Paul

    • @collectormk
      @collectormk 4 роки тому

      @@XjunkieNL Ja dat klopt. Maar het komt goed. Morgen kan Pap er even naar kijken.

    • @collectormk
      @collectormk 4 роки тому +1

      Heey Paul, Het is gelukt, de 2 LP's zijn gerepareerd, Er zat teveel stof in waardoor de naald niet goed naar alle nummers doorheen komt, 1 LP van zat een broodkruimel precies op de hoek waar 1 nummer zat, Mijn vader had die broodkruimel weggehaald waardoor de groef rechtstond, Dus dankzij mijn vader is het weer opgelost,

    • @XjunkieNL
      @XjunkieNL  4 роки тому

      Dat is goed nieuws! Fijn dat alles weer is opgelost. Kan je de platen weer draaien :) Soms zijn het de kleinste dingetjes die er voor zorgen dat de naald overslaat. Fijn weekend! /Paul

  • @dsonyay
    @dsonyay 5 років тому

    Is that a Nagaoka 110? I have same one. What do you think of this cartridge? Mine is on a Rega P2.. sounds very good

    • @XjunkieNL
      @XjunkieNL  5 років тому

      It's a fantastic cartridge. I really like the sound. No weak spots. And it's affordable. Hope you're also enjoying yours. Cheers. /Paul

  • @marcb8874
    @marcb8874 Рік тому

    Merci pour cette video , bien qu'avec la traduction ce n'est pas facile de tout comprendre , si je comprends vous employez un stylet de DJ AVEC 5 GR ? quelle style de pointe exactement svp , merci pour une réponse avec 5 ans

    • @XjunkieNL
      @XjunkieNL  Рік тому

      Hi Marc! J'espère que cette traduction google fonctionnera. Le poids est en effet de 5 grammes. S'il peut le supporter, vous pouvez augmenter le poids. La pointe de l'aiguille est conique. Pour moi, cela fonctionne le mieux. Succès. Et bonne chance. /Paul

  • @mikevieira8583
    @mikevieira8583 Рік тому

    Love the microscope idea!

    • @XjunkieNL
      @XjunkieNL  Рік тому

      Hi Mike. It does make the job a lot easier. Thanks for watching. Cheers. /Paul

  • @paulomontero12
    @paulomontero12 Рік тому +1

    Try a dac or even a cd player! Vinyl is better sounding in my experience but it’s such a pain in the arsh to get it right! One scratch there goes your enjoyment out the window.

    • @XjunkieNL
      @XjunkieNL  Рік тому

      Hi Paolo! Hahah, somehow, we have to deal and accept that life has surface noise. Or follow your suggestion and go digital all the way. For sure analog can be a huge pain in the *ss :) Cheers. /Paul

  • @domingoleija3436
    @domingoleija3436 Рік тому

    This is like surgery gentleman. Worth a shot for favorite record.

    • @XjunkieNL
      @XjunkieNL  Рік тому

      Hi! The vinyl doctor ;) Every record is worth to be saved :) Cheers. /Paul

  • @mistr_d
    @mistr_d 4 роки тому

    Question, I have a really old vinyl copy of Jimi Hendrix Gloria on both sides (Van Morrison) that is starting to tear, is there any way to repair it? Thank you in advance.

    • @XjunkieNL
      @XjunkieNL  4 роки тому +2

      Hi! Just looked it up. That is great unique single to have in the collection. What do you mean with tear? Is it starting to crack on the edge? If a little bit of super glue on the outer edge can help to stop it crack any further. Cheers. /Paul

  • @xavierrosas2825
    @xavierrosas2825 3 роки тому

    THANK YOU SO MUCHHHHHHH. YOUR AN ABSOLUTE GENIUS.

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hi Xavier! Many thanks :) Does this mean you were able to save a record? Happy to have been able to help. Cheers. /Paul

  • @ALADDIN9999
    @ALADDIN9999 Рік тому

    Nice video !! what is the name of the track and of the band ?? sound like Santana

    • @XjunkieNL
      @XjunkieNL  Рік тому +1

      Hi! The album that is playing is Higher Plane Breeze by Ofege. A Funk band from Nigeria. For sure there are some Santana elements. Happy holiday! Cheers. /Paul

    • @ALADDIN9999
      @ALADDIN9999 Рік тому +1

      @@XjunkieNL Thanks a lot !!

  • @mukeshrajput3141
    @mukeshrajput3141 2 роки тому

    Hi
    I saw your vidéo clip for cleaning grooves can you please give me référence for the product magnifying glass with clip.
    As i want to buy it.
    Thnx

    • @XjunkieNL
      @XjunkieNL  2 роки тому

      Hi. Easiest way is to search Ebay for "mini pocket microscope". Several will pop up. Don't think there much difference between the different models. I like the one with the clip. Thanks for watching. /Paul

  • @bubble-and-scrape
    @bubble-and-scrape 6 років тому

    Hi Paul, wat was dat voor apparaatje waarmee je het gewicht van de arm woog?

    • @XjunkieNL
      @XjunkieNL  6 років тому

      Hi! Het is een digitale weegschaal. Werkt eenvoudig en makkelijk. Dit is een goedkope Chinese versie en verrassend nauwkeurig. Heb er een aparte video over gemaakt. Zie ook ua-cam.com/video/Ky6fYQRSe2Q/v-deo.html Groet. /Paul

  • @sjt66
    @sjt66 4 роки тому +2

    I fixed my first scratch in a record when I was eight years old by doing the same thing replaying it with a penny on the needle

    • @XjunkieNL
      @XjunkieNL  4 роки тому +1

      Cool! That's very similar to what I'm doing. And it works! A skill every eight year old should learn ;) Cheers. /Paul

  • @EdwardKerr-k3j
    @EdwardKerr-k3j 7 місяців тому

    Is it normal to see white reflections on top of grooves or could it be a buildup of calcium carbonate?thanks

    • @XjunkieNL
      @XjunkieNL  7 місяців тому

      Hi. Perfectly normal :) I've got the same. Most probably it's the leds reflecting on the flat part of the record. All the best. Cheers. /Paul

  • @RedVynil
    @RedVynil 2 роки тому

    What is a loop? I've been collecting for 63 years and have at least 60,000 records and have never heard of a loop.
    As for digging a piece of junk out of the groove. I think it'd be best to go at it the reverse direction of the needle because the needle going over it the normal way is probably what shoved it into that groove, in the first place! I've also found that, if I spin a record backwards, the needle will actually plow a lot of those dust specs back out. Sometimes it has to be done a few times but, usually, the first attempt will do it. I've never tried it before but, I guess it's possible that a little water left on the effected area might soften the dust spec and make it easier to get out.
    Okay, I call that, "sticking" or, "a stick'. If it jumps a groove forward, it skips, if it skips backwards, it sticks because it's stuck in the same groove.
    Top fix those, I just put the needle past the stick and spin it backwards. Doing it that way, the needle, basically, closes the "door" that WAS open so it can't go through the skip again.

    • @XjunkieNL
      @XjunkieNL  2 роки тому

      Hi! Thanks for sharing your experience. You collected a lot of records over time. There must be quite a few that needed to be fixed. I call it a loop, when the needle keeps repeating the same bit of music. It sounds as if the music is stuck in a loop. I wished I mentioned spinning the record backwards in the video. It can be effective to fix a skip. Form experience I find it less effective at fixing a loop. All the best. Cheers. /Paul

    • @RedVynil
      @RedVynil 2 роки тому

      @@XjunkieNL Even though I was a LITTLE rough on my records until I was about 14, I never had too many problems with them I don't think I've ever had to fix more than a handful (5 or 6). Some of the skipping ones can be tricky, though because running it backwards might just make it skip backwards so, you HAVE to see to it the needle is ONLY going to through groove 1 backwards to close the 'door' to keep it from skipping over into groove 3 when playing forward.
      I just had a thought for an experiment to follow this up with: if you're successful in closing that "door", in order to keep it closed, I wonder if it'd be a good idea do do the warp flattening trick with it, too in hopes that once the vinyl has cooled off, the "door" will have sealed itself shut?
      I heard you mention the loop and then paused the video to type the question. Had I left it run another 5 seconds, I would've found out what you were talking about.
      I THINK the first record I ever got was a Christmas present when I was 2. I was already into records by then but I'm not sure if I ever owned one, just yet. I still have a picture of me holding it the night I got it! Christmas 1959. as it was most likely a few days or so AFTER Christmas, it could've actually been very early Jan. `60! Christmas day, we'd always spend with the family, over then next week or two, we''d go visit my parents' friends and one of them gave me that record. Some woman singing and telling the story of a sleepyhead squirrel. The record vanished over the years. Most likely, mom threw it and some of my other kids records away when I got a little older.
      I'd have at least another 2000 records but, my ex-sisters really screwed me over 2 years ago and I lot at least 2000 78's!!
      Take care, Paul!!

    • @XjunkieNL
      @XjunkieNL  2 роки тому

      When growing up I was really not careful with vinyl records. Mostly because me and my friends played our records at small house parties. Although many are scratched or have damaged sleeves, I keep them, as memories are attached to them. Nice idea to see if heating and cooling would make the fix more permanent. At some point I have try it. Till now I haven't been successful. Sorry to hear about the 78's. Most have been some rare ones in that stack. /Paul

    • @RedVynil
      @RedVynil 2 роки тому

      @@XjunkieNL Same here. Records help me remember things. One record was played during this one time in my life so, if I forget when something happened, I remember that record being played and that tells me when that thing happened.
      I still have most of my records from when I was a kid. In some cases, if I listen to new copies of them, I can tell you where the pops and clicks (from scratches) are on my old copy, even though I haven't heard it in decades.
      Here's a strange one! I started getting into The Firesign Theatre back in `73, I think. From the very first time I heard their second album up to about 20, 25 years ago, no matter what record player I heard it on, it ALWAYS skipped over one revolution about 3:00 into the Nick Danger side and I never even knew it!! There was NEVER a pop or a click and it was in NM condition, or better, the whole time!! it even did that on my friend's copy!!! And, it happened right when the adjoining grooves were silent so, there was no way I could tell it kept missing a spot until, one day, I was playing it for someone and, suddenly, there was a new bit added that I'd never heard before!! It was "Nick Danger" saying, "Pyramid Patchouli". And, ever since then, that groove has been played when I play that record!!
      Thank you! I even had one with Glenn Miller's autograph on it!! On the other side were the autographs of two of his singers, ray Eberle and Marion (Hmmm, I can't think of her last name! Hutton?)! Luckily, I still have a LOT of them on cassette tapes. I archived them back in the late `70's. Probably 50 to 70 hours worth. I picked up at least 2000 more 78's since then.

    • @RedVynil
      @RedVynil 2 роки тому

      @@XjunkieNL Forgot to mention, I used to work at Jerry's Records and he would often have me clean used albums he'd just picked up. I used to know the recipe but, it's something like a 50/50 solution of distilled water and 7th Nature dish washing liquid. Mix it together, put it in a spray bottle and when you need to clean a record, lay it on a counter top with a sleeve under it, spritz a few spots on the playing surface, get a lint-free paper towel (I think he would use Brawny or Bounty, not sure which) and use the towel to smear the stuff around on that side of the record, then another towel to clean off the excess. Flip it over and do the other side. I've seen dirty records become almost near mint doing that! Sadly, Jerry died 3 months ago but I think he left the recipe for that stuff with the guy that bought his store from him.
      Here's Jerry. ua-cam.com/video/uKHoF0_S_D0/v-deo.html
      ua-cam.com/video/iHTnj50NVJg/v-deo.html

  • @stevenkearns424
    @stevenkearns424 4 роки тому

    I have a relatively expensive record that got glue from the inner sleeve on one of the tracks..I cleaned it up as best as my cleaning agent would do... Unfortunately it affects that track ( my favourite one).... any ideas on how I can get it cleaner?

    • @stevenkearns424
      @stevenkearns424 4 роки тому

      The reverse side is etch painted also..

    • @XjunkieNL
      @XjunkieNL  4 роки тому

      Hi Steven. Sorry to hear your troubles with the glue. Removing glue is patient job. Till now I haven't found a one step cleaning method. The way I've had success is by not forcing it, and just keep repeating the cleaning. Let the cleaning solution for example a few minutes on the record. Every clean you take a little off. As soon as you force it, you can easily damage the vinyl. Let me know if you did get it cleaner. Good luck. /Paul

    • @stevenkearns424
      @stevenkearns424 4 роки тому

      @@XjunkieNL Cheers Paul... in my haste I rubbed the hell out of it...

    • @XjunkieNL
      @XjunkieNL  4 роки тому

      Do you think you damaged the groove with the rubbing? You could be lucky if you just smeared it across the vinyl. See what happens if you leave the cleaning solution 5 minutes on. If it helps a little, try again. /Paul

    • @stevenkearns424
      @stevenkearns424 4 роки тому

      @@XjunkieNL Hopefully not. It still plays. I've probably smudged it in there deep. I will try out leaving g solution on like you say.. Will let you know

  • @carbonidsolo5479
    @carbonidsolo5479 3 роки тому

    I can't find the link to the microscope. can somebody help? How high is the magnifying factor of your micrscope?

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Hi! Best to search on Ebay for "mini microscope". You will find many. Get the cheapest ;) Have a nice weekend. /Paul

  • @andyshirley1204
    @andyshirley1204 4 роки тому

    Top advice thanks my man

    • @XjunkieNL
      @XjunkieNL  3 роки тому

      Thanks, Andy! Hope it helps you to save some records. Cheers. /Paul

  • @QoraxAudio
    @QoraxAudio 5 років тому

    That awesome microscope, what brand/type is it?
    Btw, nice SL1200G, I have one too!
    Second best direct drive TT on the market, only the modern SL1000R can beat it, but that one's way outta my league haha

    • @XjunkieNL
      @XjunkieNL  5 років тому

      The microscope is the cheapest you can find on ebay. No brand name. It's a handy little toy. Wow, cool to hear you also got a SL1200G. It is a BEAST, right? Amazing turntable. Maybe when I win the lottery, I will think about the SL1000R ;) Have a great weekend. /Paul

    • @QoraxAudio
      @QoraxAudio 5 років тому

      @@XjunkieNL Yeah, I am a 'Technics nerd', I have owned, repaired and modded many models of the original 1200 series (series before the oktober 2010 closedown). But this modern model is even better indeed! Especially the heavy brass platter, cogging free motor and the magnesium tonearm are amazing. However, I'm planning on retrofitting it with an SME V tonearm as soon as I have the money for the SME V with all the extra options.
      The only downside of the 1200G is the home serviceability. It's mainly operated by a microcontroller, so there's not much to see about it 'under the bonnet', in contrary to the full and semi analogue electronic MK2 up to M5G.
      However, most of the mechanisms have been kept more or less the same, especially the insides of the tonearm assembly.

    • @XjunkieNL
      @XjunkieNL  5 років тому

      That's cool to hear. No matter what anybody says the original 1200 started a revolution. A legend! Perhaps a stupid question: are you unhappy with the arm? Hahah, I got the 1200G, because I no longer wanted to mod a turntable. It never stops :) /Paul

    • @QoraxAudio
      @QoraxAudio 5 років тому

      @@XjunkieNL You're right on both topics, upgrading my system is like a neverending hobby coming closer to perfection every year, but never actually reaching it.
      The Technics SL-1200 series has even become the 'industry standard' and there is even a pair of SL-1210 MK2 at the London Science museum (a reputable museum)!
      So yeah, it's a legend already :)

  • @cruzingrsx4484
    @cruzingrsx4484 6 років тому

    Thanks for the tips!

    • @XjunkieNL
      @XjunkieNL  6 років тому

      Thanks for the comment. Happy to share. Cheers. /Paul