McDonell RF-101C Voodoo USAF 1/72 Valom scale model Full Video Build

Поділитися
Вставка
  • Опубліковано 4 гру 2024

КОМЕНТАРІ • 58

  • @antoeknee4511
    @antoeknee4511 4 роки тому +4

    Good build! I like the fact you have enough confidence to freehand the camo pattern instead of using any type of masks, except where necessary.

    • @doctormig2709
      @doctormig2709  4 роки тому +1

      Thanks.I do enjoy the freehand painting a lot.I find it much more realistic than masking.

  • @mitzyismad
    @mitzyismad 4 роки тому +1

    Nice build of an iconic aircraft.

  • @chancerNW
    @chancerNW 4 роки тому +1

    An utterly excellent build of a reccy Voodoo well done

  • @lesthiele4921
    @lesthiele4921 4 роки тому +1

    Hello Doc, another great kit exceptional job well done, hope you and your family are keeping safe and well.

    • @doctormig2709
      @doctormig2709  4 роки тому

      Hello and thanks.We are and try to remain that way.Take care and atay safe.

  • @billscott1601
    @billscott1601 4 роки тому +2

    Dr. Mig, another great model! Glad to see short run kits built instead of the main line brands.

    • @doctormig2709
      @doctormig2709  4 роки тому

      Thank you Bill ;) I will try to make more shortruns in the future and post the videos here ;) take care

  • @ashpitcher3
    @ashpitcher3 4 роки тому +1

    Another fantastic build. Well done, she looks great.

  • @The_Modeling_Underdog
    @The_Modeling_Underdog 4 роки тому +1

    What a beast. Looks great!

  • @SprueFascinationChannel
    @SprueFascinationChannel 4 роки тому +1

    Excellent workflow & result 👍

  • @henrysanchez4810
    @henrysanchez4810 4 роки тому +1

    Another great build Doc, excellent work...

  • @ИгорьДевяткин-х6э
    @ИгорьДевяткин-х6э 4 роки тому +1

    Замечательная работа!
    Буду собирать F-101A.

  • @sandrozeb
    @sandrozeb 4 роки тому +1

    I like the attention in making the front canopy seamless with the Fuselage. Even accomplished modellers often overlook that detail. However watching real plane photos it is clear that there is no gap between the front canopy and the fuselage. May be the a slight improvement in restoring the front canopy to crystal clear conditions would be great. Well done. First class free hand airbrush. And nice choice of models.

  • @sultanofswing8270
    @sultanofswing8270 4 роки тому +1

    Great models as always and by far the best music in any build videos !!

    • @doctormig2709
      @doctormig2709  4 роки тому

      Thank you very muchmI am glad you like it :)

  • @swing.wing_singh
    @swing.wing_singh 4 роки тому +1

    Excellent work as usual. The camo is fantastic

  • @laMoort
    @laMoort 4 роки тому +1

    great build!

  • @mhos6940
    @mhos6940 3 роки тому +1

    I have the same kit. Can't wait to build it but I have many more to build before I get to it. Nice job! Hope mine turns out as well as yours.👍

    • @doctormig2709
      @doctormig2709  3 роки тому

      It is a bit difficult kit to work with but totally worthed.

  • @marcosgarcia4467
    @marcosgarcia4467 4 роки тому +1

    Very cool!

  • @tjbach8213
    @tjbach8213 4 роки тому +1

    What perfect timing for me as always:)

  • @Ralle1968
    @Ralle1968 4 роки тому +1

    Top Job!👍👍👍

  • @greenheartjg54
    @greenheartjg54 2 роки тому +1

    I would really like to know what airbrush you used here as well as your compressor suggestions.

    • @doctormig2709
      @doctormig2709  2 роки тому +1

      0.2mm chineese cheap airbrush.I use a home handmade co.pressor using an old coocking gas tank and refrigerator motor.a friend od mine made it for me.

  • @foreverplastickits138
    @foreverplastickits138 4 роки тому +2

    *Very nice result 🤩👏👏, i'm jealous, you can freehand paint with an airbrush, i've to use tons of masking tape to do the same! 👍*

    • @doctormig2709
      @doctormig2709  4 роки тому +2

      Thank you.Everyone can do freehand camos.It just requires a 0.2mm aibrush properly diluted paints and low air preassure and of course a lot of practice.

  • @bobbob4652
    @bobbob4652 4 роки тому +1

    Not bad. Get a better brush for the small details and you will get better results.

    • @doctormig2709
      @doctormig2709  4 роки тому

      Thanks.it is long overdue but I have to order some soon :D

  • @jozeffrantisek4578
    @jozeffrantisek4578 4 роки тому +1

    Fin rad! Odličan South East Asia!
    Oduvek sam hteo da uradim jednog takvog.... Doduše, mene bi zadovoljila i stara Hasegawa, bez obzira na (ne)tačnost. Bilo bi jako lepo, ako bi, kao suma sumarum, napisao u jednom komentaru sve sta treba da znamo o ovoj maketi (koje su koske, sta se uklapa katastrofa, da li je potrebna bilo kakva hirurgija....). Ti jesi naveo ukratko da fit nije baš najbolji, ali opet.
    I da, gde su ti brojevi, baza, stencili? 😃

    • @doctormig2709
      @doctormig2709  4 роки тому +1

      Hvala ti Jozefe.I ja sam jednom hteo da nabavin hasegawu ali odustao sam.Maketa se sklapa ocajno.Spoj krila trup je uzasan.Takodje i spoj donjeg dela krila/trup u cnrtralnom delu je takodje ocajan sto se vidi i na samom snimku.Tu se stvori strpenik od 1-2mm i mora se popuniti superlepkom plastikom ili bilo sta slicnom.Trup i nos se sklapaju ok.Prednje staklo mora da se lepo namesti da bi mogao da ga uopste zalepis jer na samom pocetku ispred samog stakla javi se rupa od 1mm.Rezinski izduvi ne nalezu bas najbolje i to se mora malo posvetiti paznje ali to je nista strasno kad se uporedi sa spoj krilo trup.Stensile baza i broj nisam stavio jer je to bio zahtev musterije za koga sam maketu i radio.Takodje rondel na trupu je na vecinu aviona odma ispred usisnika a ne ovako napred.Ali opet kako musterija kaze tako i uradim ;)

    • @jozeffrantisek4578
      @jozeffrantisek4578 4 роки тому +1

      @@doctormig2709 uh.... Deluje bas haotično, dakle ne preporučuje se ova maketa za neko uživanje u hobiju.... Dobro je da znam, da ga ne uzimam...

    • @doctormig2709
      @doctormig2709  4 роки тому +1

      Pazi ako bas hoces rf101c onda nemas drugi izbor.Ovo je najbolje sto postoji.Ali da bi se uradila pristojna maketa mora se raditi bas muski.

    • @jozeffrantisek4578
      @jozeffrantisek4578 4 роки тому +1

      @@doctormig2709 To je situacija, u glavnom, sa svim limited run maketama.... Na ramu to sve izgleda jako fino, verovatno, kad se sklopi, bude ozbiljan model, ali iskasljes krv dok ga sklopis.....Radije bih izbegao plaćanje makete ako cu se nervirati oko nje..... Iskreno se nadam da ce neka alternativa isplivati, u narednih nekoliko godina, a ako se pojavi Hasegawa, sta god ljudi pričali, nije tačan, pozitiv.... Meni to liči na Vudua, i sigurno se neuporedivo bolje sklapa od Valoma..... Ali dobro, sve ima svoje, i nisu sve makete za svakoga! Neko voli da radi hirurgiju....

    • @doctormig2709
      @doctormig2709  4 роки тому

      Potpuno se slazem.Sve sto si napisao je tacno.

  • @laszlonemeth3703
    @laszlonemeth3703 4 роки тому +1

    Hello, what happened to the tail codes?

  • @pacimini
    @pacimini 4 роки тому

    Dei veri cani. Meglio non farli vedere certi tutorial

    • @doctormig2709
      @doctormig2709  4 роки тому

      I dont understand what you mean.

    • @pacimini
      @pacimini 4 роки тому

      @@doctormig2709 in this tutorial you made a bad work.

    • @doctormig2709
      @doctormig2709  4 роки тому

      Oh well ok ;) thanks for the comment :)

  • @kennyraicherter1264
    @kennyraicherter1264 4 роки тому

    I'm so sick of you super detailers you ruined the industry of not putting in pilots now these company's follow suit shameful I will take the old kits over these new ones any day

    • @doctormig2709
      @doctormig2709  4 роки тому

      What super details you see on this kit.This is a OOB build.I did not add anything not used any aftermarket stuff to super detail the kit.I really do not understand your comment.

    • @Flynnster-qu1gw
      @Flynnster-qu1gw 4 роки тому +1

      The point of this hobby is for people to do what they please with their model and make them different and more interesting, that's what makes this hobby wonderful. Its all down to your personal preference, what Doctor MiG has done here is a exquisite example of that. Building models the way you describe seems boring and un-interesting to be honest but if you like it then go ahead and I respect that.