nice launch at 11:33 but they scraped the paint of the bottom of the boat 😆 I never would have believed it was possible to launch a boat of that size on such a awkward angel. I'm impressed with the confidence and expertise of these boat builders. 👌
Bapak. Imam. Muzamil. Masuk. Seragam. Dinas. PDH. Topih. Pelaut Sepatu hitam Pakaian. Sehari Hari Lengkap Lemari Plastik 6. Susun Besar Anggota ABK. 6. Orang. Pancinggan ikan 9. Orang Laut. Hitam. Laut. Lepas. Medan. Jember Janpan Korea Utara Korea Selatan Kapal Baru Nelayan Buat Bapak Imam Muzamil. THANS. You. Cheanjheah. Kapal. Baru. Nelayan.
I get the impression that these guys have done that a few times before!! I was biting my nails hoping for a good outcome, but they all knew what they were doing, even though to me, it looked a bit dangerous at times. However, I am no expert, and in she went without drama. Good job I was not on the team though, as I couldn't understand a word they were saying!!!
Perfect launching with extreeme accuracy involving minimum operational cost !!! Admirable workmanship and coordination. I would not be surpsised if the technology is centuries old...
Imagine this in the U.K. Health and safety 1/ no hard hats 2/ no safety boots 3/ no life jackets 4/ no protective specs 5/ no barriers 6/ working under the boat whilst moving 7/ no obligatory hi viz vests 8/ no method statement 9/ no toolbox talk 10/ no asbestos awareness God bless these workers for getting on with the job, maybe now we know why the British Shipbuilding industry has been lost to this country.
There are several ways of launching a vessel of that size, and that is obviously one of them. Although personally I think that if they are going to continue using a set up like that, I would maybe add another axle, on a little longer carriage, with a braking system set up so that it can be used to both steer, and stop it, yet still be able to be tilted at the seawall for launching. Great job, and I like the hull shape, with the added reserve buoyancy built into it. That is a great looking little sea boat. (You should add a link to the builder, or hull make/model).
I've been in japanese waters, crossing many times the Shimonoseki strait, the inner sea etc. All around the islands those fishermen in those sleek, fast boats were mindless of sea traffic: they just put the throttle full ahead and you had to blow the whistle like crazy to tell them to watch around!!!
Beautiful boat, it looks like a longline Tuna boat but the hull doesn’t seem deep enough for the below deck brine tank. It would be great to put a luxury cabin on that hull for a private boat
To all you experts out there full of criticism you probably want to take a few things into account. Look at the terrain, 50ft/20m away they've got a rock cliff or hill side to contend with. So turning the boat doesn't appear to be an option. Next, that's not a boat ramp but a road they're temporarily blocking. Look on the other side of the boat, it's a narrow road that winds along the bay at waters edge. That area is normally chained off and they've pulled the posts to launch the boat. They obviously chose high tide. The steel skid that swivels indicates this isn't their first launching. Although given the confines with the building and the obviously over loaded boat carriage this is likely one of the larger or largest boats they've launched, thus the reason for the video. Also they clearly appeared to be at the limit of their ability to control the boat easily, let alone at all plus you look around the harbor and this boat towers over the other fishing boats. Given the circumstances they did good. Yes the front keel scraped on the skid plate a bit, it wasn't the cement. Probably ran out of grease, but no significant damage and no one was hurt. There has been more than one huge professional ship building firm that have screwed the pouch during a launch. Beautiful boats guys!
I kept thinking "who here is going to die today". Looks like the boat had the greatest chance. Loved the tug of war as the boat tired to beach itself on the other shore. :0
Very dangerous practice, lucky that no one was hurt. Painful to watch the boat's bottom scratching and banging before entering the water. This is a boat building site, I cant believe that they dump it in like that.
@@alext9067 I and some friends have been thinking about the rudder and its apparent tab. If we could see up inside the hull, I think there would be a linkage to turn the "tab" in the appropriate direction. The link from the hull being a rod, that rod running in a tube on the tab. I tried looking at the website mentioned by the Poster but that is an angling site not the boat builder. An interesting arrangement however it works. Could be just the tab is used at higher speed or the tab give greater rudder effect at slow speed. The stern thruster would perhaps suggest the former rather than the latter.
The great art of everything.! Making Moving and launching Japanese always respectful talented people.! Love it.
She is a beautiful boat. I hope she has a long and happy life.
nice launch at 11:33 but they scraped the paint of the bottom of the boat 😆
I never would have believed it was possible to launch a boat of that size on such a awkward angel. I'm impressed with the confidence and expertise of these boat builders. 👌
Masuk Anggota Abk Perwira Kapal komandan 6 Reguh Anggota TNI AL Lantamal 9 Moscow Berlayar
LAUT LEPAS LAUT JAWAH OK RI
@@aqelalharbi5854 ...ok, I'm not sure what that means? 🤔
10:35でビール（？）をかけて船の安全を祈ってくれていますね、こういう細かい心配りは素晴らしいと思います。
この船のオーナーさんもこの造船所で良かったと思っているのではないでしょうか
That balancing act was absolutely scary! Amazing......
Apart from all those docking expert-comments, a very elegant boat....the whole community is watching and taking part, bless them
Thank you 🙏 maybe a big boat ⛵ 🚤🛥️🥁🪘 ceremony 🎑 and great 👍 Job 👋
Amazing craftsmanship! These Japaneses will survive after the 3rd World War. Congratulations!
I just couldn't believe it they did extremely well dedication n team work No injuries no boat damage thank God
11:33 The video camera🎥 should focus on the dockside to see if the rear of boat hitting the concrete.
E muito lindo demais
Bapak. Imam. Muzamil. Masuk. Seragam. Dinas. PDH. Topih. Pelaut
Sepatu hitam Pakaian. Sehari Hari
Lengkap Lemari Plastik 6. Susun Besar Anggota ABK. 6. Orang. Pancinggan ikan 9. Orang Laut. Hitam. Laut. Lepas. Medan. Jember
Janpan Korea Utara Korea Selatan
Kapal Baru Nelayan Buat Bapak Imam Muzamil. THANS. You. Cheanjheah. Kapal. Baru. Nelayan.
Work Health and Safety would have a hissy fit if this was done in Australia. Well done guys
I get the impression that these guys have done that a few times before!! I was biting my nails hoping for a good outcome, but they all knew what they were doing, even though to me, it looked a bit dangerous at times. However, I am no expert, and in she went without drama. Good job I was not on the team though, as I couldn't understand a word they were saying!!!
Yes beautiful ship sending support watching from Manila Philippines sulid ako gogogo 🇵🇭
Perfect launching with extreeme accuracy involving minimum operational cost !!!
Admirable workmanship and coordination.
I would not be surpsised if the technology is centuries old...
c adis - "minimum operational cost" that's true .
Very dangerous for the men!
These dumbasses managed to scrape their keel before ever touching the water and almost knocked off the bow on the ramp. May we nuke them again
@@joshlower1 - A serious topic, but must admit that I had to laugh at the comment.
คนนี้เก่งจริงๆ ทำได้ทุกอย่าง
おお！ベルデ号だ、お世話になってます、揺れが少なくて釣りやすいいい釣り船です！
Well done and I couldn't call that a ship looks more like a oil & gas field work boat like crew boats
Totally brilliant and amazing skill shown by the boat builders launching this vessel from belfast northern ireland
Amazing
What a terrific coordinated effort. Marvellous.
Who liked my reply ? No details are available.
Build a railroad ramp. No will get hurt, even though no one has been hurt. Nice boat!
Imagine this in the U.K.
Health and safety
1/ no hard hats
2/ no safety boots
3/ no life jackets
4/ no protective specs
5/ no barriers
6/ working under the boat whilst moving
7/ no obligatory hi viz vests
8/ no method statement
9/ no toolbox talk
10/ no asbestos awareness
God bless these workers for getting on with the job, maybe now we know why the British Shipbuilding industry has been lost to this country.
Con tàu của tương lai🌾🙏🇻🇳👍
Selamat🎊🎉 peluncuran perdana kapal 🚢 nelayan nya 👍
There are several ways of launching a vessel of that size, and that is obviously one of them. Although personally I think that if they are going to continue using a set up like that, I would maybe add another axle, on a little longer carriage, with a braking system set up so that it can be used to both steer, and stop it, yet still be able to be tilted at the seawall for launching. Great job, and I like the hull shape, with the added reserve buoyancy built into it. That is a great looking little sea boat. (You should add a link to the builder, or hull make/model).
超改善の余地があり過ぎて笑える！
好有趣的下水仪式呀，激动人心的时刻呢
Buen trabajo de los calafateadores y buena botadura.....larga vida
吊り荷の下に入るな！！って書こうと思ったら、吊ってさえ居なかった・・・
台車ごと進水させるとか、キールの下に丸太のコロでも敷くとか、いくらでも摺らずに済む方法が有ると思うが。。
いつか死人が出そうな作業風景。
I guess this factory never heard of the amazing capabilities of a winch. And possibly a roller to be put there onto the edge.
LOL
Wow greetings from Ireland.
Most probably a centuries old practice that still works today. Good to see before this too is filed in the big old box of history. Thank you.
I've been in japanese waters, crossing many times the Shimonoseki strait, the inner sea etc. All around the islands those fishermen in those sleek, fast boats were mindless of sea traffic: they just put the throttle full ahead and you had to blow the whistle like crazy to tell them to watch around!!!
Бойся в море рыбака..., но рыбакам по правилам международным всё уступают дорогу. Также они снуют и в Северном море.
見るからに 美しい カッコいい大きな 漁船ですね 惚れボレして 観てました。
産まれ故郷の石巻市の西山造船所を思い出します。もう６０年前のことですが当時は陸から海の中へレールが長く伸びていました。子供時代はよくそのレール付近でみんなで遊んだものです。レールも使用しないで昔ながらの船の進水させるのを初めてみました。
自分も石巻出身ですが、山西造船所では？
.
Thank you for sharring this.
すごい迫力ですね
せっかくの新造船が(°_°)
Che cosa non si fà per un regime! Pura sicurezza sul lavoro 😱 me lo aspettavo da qesto video cinese
Beautiful boat, fantastic teem work . I would like to see more of the company that built it .
in U.S. OSHA would fine you forever. Nice boat.
Great work for launching of boat
I respect this people! Team Work and discipline.Our chalenge in Brasil.
11:28の グッシャ！ はマズいでしょ～
11:35 思いっきり擦ってるし
Beautiful boat. Hello from Texas.
Very beautiful ship 👏👏👏👏👏👏👏👍👍👍👍✌️💕🍻🍻🍻🍻🍻⛄🎄🏖️💕
Un trabajo Artesanal digno de lo mejores Maestros
What in the hashitaki mushrooms is going on here.😂
Ingenious idea and minimalistic tools.
Beautiful boat, it looks like a longline Tuna boat but the hull doesn’t seem deep enough for the below deck brine tank. It would be great to put a luxury cabin on that hull for a private boat
Worker beautiful..
To all you experts out there full of criticism you probably want to take a few things into account. Look at the terrain, 50ft/20m away they've got a rock cliff or hill side to contend with. So turning the boat doesn't appear to be an option. Next, that's not a boat ramp but a road they're temporarily blocking. Look on the other side of the boat, it's a narrow road that winds along the bay at waters edge. That area is normally chained off and they've pulled the posts to launch the boat. They obviously chose high tide. The steel skid that swivels indicates this isn't their first launching. Although given the confines with the building and the obviously over loaded boat carriage this is likely one of the larger or largest boats they've launched, thus the reason for the video. Also they clearly appeared to be at the limit of their ability to control the boat easily, let alone at all plus you look around the harbor and this boat towers over the other fishing boats. Given the circumstances they did good. Yes the front keel scraped on the skid plate a bit, it wasn't the cement. Probably ran out of grease, but no significant damage and no one was hurt. There has been more than one huge professional ship building firm that have screwed the pouch during a launch. Beautiful boats guys!
What a Beautiful piece of Works
Bravo bravo
Very strange way to launch a ship, but they got it done finally in the end.
She's stylish looking vessel !
Excellently wonderful
I kept thinking "who here is going to die today". Looks like the boat had the greatest chance. Loved the tug of war as the boat tired to beach itself on the other shore. :0
that certainly didn't sound good when it hit the other side.
For me absolutely brilliant!
Sounds a little crunchy.😂😳
ยอดเยี่ยมเป็นภูมิปัญญาของแต่ละที่
สิ่งที่จะคอมเม้นท์คือความปลอดภัย แคร่รับเรือใช้ล้อยางสูบลมน่าจะเสี่ยงกับอาการยางระเบิดน่ะ
These ships have such beautifull lines!!!!
Well done 👍 great respect!
Mantap kapal nelayan kawan luar biasah
The launch starts at 11:20, nice!
Mantap sunggu luar biasa.
Is this simply traditional way ??? Why not more modern lauching with incline and rollers ? Was amazing but scary to watch...:))
This was aperfect and smooth launch good job これは完璧で滑らかな打ち上げの良い仕事でした
Well done, guys!👍
Simply Genius !
仕事で使う道具を放り投げている時点で、この造船所の仕事のやり方がわかりますね。
Good job and a good launch
大型船の進水式よりも緊張感がありますね。無事で何よりでした。私も子供のころよく父の船がドックに上がってましたので、このような動画を見ると大変懐かしく思います。夏場素潜りで船底の掃除アルバイトしてました。高知県中村市の下田と言う港です。
岡田義輝 m
3 men stopping a roll like that. God bless them for the thoughts
They did a good job of stopping it. Cool boat.
Good Job
Good looking boat
Makes you wonder if they ever did this before? Beautiful big boat! Doesn't seem like enough do!lies/wheels underneath.
Good one.
Large fishing boat compare with other boats 😁👍🙏🇲🇾
Nice boat, the launch is kind of sketchy
Using the space you have, and the materials at hand, well coordinated group working together, well done
They made it look easy.
!!! Muito bem organizado. Belo trabalho!
いろんな意味ですげえ。
Very dangerous practice, lucky that no one was hurt. Painful to watch the boat's bottom scratching and banging before entering the water. This is a boat building site, I cant believe that they dump it in like that.
Certainly an interesting way to launch a boat.
睇見都開心😄😄😄😄
Ha thủy tàu wa good 👍
外国人が指摘されているようにお粗末で危険極まりない進水作業です。ハラハラ・ドキドキでした。事故防止の早急な改善方策が必要。
@@sushiromifune7096 いっぱいあって草
Lindo!
Sangat menghibur chanelnya bos..!
Semoga terus semangat.!
Salam dari Chanel Pur Y🙂🤝
no hesitation at all they knew exactly what they were doing, perfect launch!
Tàu đẹp 👍👍👍🇻🇳
MUITO TRABALHOSO. BELO HORIZONTE MG BRASIL
The rudder looks interesting. Can anyone post any information about the rudder arrangement please? Thanks if you can.
A friend and I were looking at that. I can't dope it out. That's why I did a word search for "rudder". You're the only one I found.
@@alext9067 I and some friends have been thinking about the rudder and its apparent tab. If we could see up inside the hull, I think there would be a linkage to turn the "tab" in the appropriate direction. The link from the hull being a rod, that rod running in a tube on the tab.
I tried looking at the website mentioned by the Poster but that is an angling site not the boat builder.
An interesting arrangement however it works. Could be just the tab is used at higher speed or the tab give greater rudder effect at slow speed. The stern thruster would perhaps suggest the former rather than the latter.
Fantastic men.
Japanese men 🧡
Beautiful boat and creative launch.
Greasing that plate......flicking hilarious.....there is so much weight combined with momentum who needs grease LOL.
Jab a sail on it I'll take it!🧐🏴☠️⚔️
Backing music: ua-cam.com/video/MK6TXMsvgQg/v-deo.html
WELL DONE !! A GREAT TEAM !!
Bot untukdibeli
中央の防舷材まで型抜きしてるんでしょうか。もしそうなら接触する度に船体が直に傷付いてしまうと思うのですが。それにしても大変な船降ろしですね。造船所の周りが埋め立てられてこんな形になったのでしょうか…