This Hilti Demo Hammer Is Ridiculous
Вставка
- Опубліковано 7 тра 2020
- Thanks to Hilti for letting me borrow this one! Not a sponsored video (I just like trying new tools).
Here is the drill www.hilti.co.nz/c/CLS_POWER_T...
Music by Bonus Points, Track name "Cup of Joe" / bonuspoints
...
I am on Instagram scottbrownc...
You can support SBC on Patreon www.patreon.com/user?u=16545763
You can donate on Paypal if you would like to help the channel too
www.paypal.com/cgi-bin/webscr...
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
SEND STUFF TO HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer:
These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this UA-cam channel and shall not have any liability in respect of any injury or damage that may result.
To view full disclaimer, click here: www.scottbrowncarpentry.com/d... - Навчання та стиль
It never ceases to amaze me where you can find pipes and cables. You can take all the precautions you want but sometimes your number just comes up.
Hilti tools are probably the best on the market. Only trouble is they are expensive. I bought a Hilti TE10 drill in 1987 and still have it today, good as new.
Que bien el taladro más bonito en su diseño. Rendidor fuerte y sencillo de maniobrar. Lo felicito. Saludos cordiales desde Colombia 🇨🇴💖
They are valuable compared to a Milwaukee or Makita you’d have replaced by now in that amount of time.
@@clonewolffe4937 Yes very valuable to me, still going strong after 37 years.
Most builders I know are half a job Harry's - they NEVER clean up after themselves. No wonder customers come to hate them. You are like a breath of fresh air. You do a job properly, wear the PPE, dust extraction and clean up. Perfection.
If anyone asks that chisel shaped hole was there before you started.
LxñXñ,
Nobody:
My neighbors at 6AM: Hilti Te 744
I work at a foundation and structural repair company and when we're pressuring grouting under a slab we almost always avoid bathrooms to avoid pipes as much as possible. We use a bosch rotary hammer for demo and for drilling through slabs. Works great.
Scott is back! You and Lo-Fi beats have been sadly missed - Great to see you. Feels like it brings the easing of our lockdown closer. Good job.
гиттоллдд
I'm biased as I work for Hilti in GB - glad you enjoyed it! To be fair, this tool is overkill for the job. The TE 800 was designed and primarily used for removing the top half of pile foundations to add more rebar and extend. You would have been better with something a bit lighter such as the TE500
Rigt,
Had me laughing this Scott, simply because of how chilled you were about the pipe 😂 I enjoy watching your video for 2 reasons 1 because it's like being on site with one of the lads & 2 I always learn something. Cheers from the uk 🍻
Cheers Jack!
love your videos, the are Just chill and your inproving things every time and i think that is satisfying af. also the fact you do those kind of cinematic shots is really dope dude hahahaha
i like your spray bucket technique! Will be adding that to my list of things. I've used just a hole in a water bottle on basement floors to sweep up before. That worked wonders!
Hilti pricing is not that bad if you want a fleet of tools that are guaranteed to be serviced & maintained. Try arguing with any other tool manufacturer over the phone to get something fixed in a short turnaround time.
The point is that it's expensive because you're not just buying a tool, you're buying into the fleet & asset management system as well. This ain't yer tool deals section at Home Depot LMAO.
and virtually no one pays list price , at least in the uk in the larger companies I've done work for.
@@jonesconrad1 I own a small communications company and use Hilti along with Milwaukee. All of my Hilti tools have been absolutely solid and their customer service is great. They do give me a small discount
@@jonesconrad1 The in NZ the prices, of everything, is at least quadrupled and the difference to the cheaper stuff is at least doubled too.
@NickoLps LOOL I have an open account with Hilti despite not actually having bought anything from them before; when I asked my dealer if he could give me the same bro-deal that my friend gets at his construction company the Hilti rep laughed & just said, "Sorry mate."
I use a few Hilti products and love them. In particular one of my Hilti drills is amazing to use. The rest of my power tools are Makita. Honestly, from a cost/benefit point of view, I’d happily just go with the Makita ( or even Milwaukee, Hitachi/Hikoki etc.) as at least in Australia, the “fleet care” is non existent.
You have brought a bazooka to a water pistol fight there mate.
It was exactly the right tool. Anything smaller would work but would be more tedious, and take longer. I used the Bosch jackhammer the same size as his, and it was the perfect tool most of the time. I literally used it daily for two years. I had the same chore every day. Chop out a recess for a Rixson on every floor for new doors. (in fully cured old concrete)
www.rixson.com/en/products/closers-accessories/floor/
@@firesurfer I agree. exactly the tool.
@@firesurfer Hilti TE-700 would have been better to do such Job. lighter, faster and efficient as it seems to be just a screed.
@@sehruddinkhan8835 Hindsight is always 20/20. You don't know that until you do it.
He did have a hard area in the corner. It could have been much worse.
I have a corded Bosch SDS+ that’s drills and chisels. It’s great for removing failed screed. The only time I needed something bigger was breaking out a concrete base. On this job I’d have started with the hollow areas and hired a bigger tool if the stuck areas were too solid.
When renovating my own house I hit an unexpected waterpipe too. To make it worse I hit it right at a 45° bend, which made fixing it more complicated. Pretty cool that the plummer could come by so quickly. Like the Hilti!
Worked for a company that only used hilti tools (Unless it was a tool that hilti didn't have) and those things never broke down even when the guys gave them severe poundings and me dropping a battery that skid at full speed down a roof and flew into the railing on the scaffolding. Barely even had a dent.
I didn't really think much of them as I was an apprentice when working with them but after having worked different tools like Makita and DeWalt afterwards, had I dropped one of their hard-shell batteries down that roof they would've cracked into a million pieces. I feel the Hilti, is an investment. It costs you an arm and a leg when first buying it but then it lasts for a lifetime.
Even if buying it as a home-gamer, would be overkill but I feel like if I bought one for my home use It would probably outlive me.
Well done Scott, you handled that emergency well, nothing worse than hitting a pipe or a wire ,in fairness to you it was in a very bad location youd never expect a pipe to be there. Great video thanks
You would think each apartment would have a cutoff, maybe that is one of the planned upgrades.
Yeah who puts pipes in bathrooms? How inconsiderate of them!
We all, I'm sure know and expect that pipes will be in bathrooms, but the pipe wasn't in a location you'd expect it to be, running parallel to a stud wall about 4 to 5 inches away from the stud wall
Hi Scott. Thanks for sharing.
I once did a laundry room remodel. Where after we'd put up the gyprock, the client asked for one more outlet to be added into where a future cupboard would be. I believe we had to make 3-4 of 5" cupsaw holes to drag the wire (as it went around an inside corner). Never had i seen a wall section more loaded with plumbing and electrical. Two main drain stacks, with offshoot, and multiple hot and cold supplies right (2mm) behind the gyp. Every time i cut a hole, i narrowly missed something.
While fixing the patching pieces for the holes i made an inexperienced decision and decided to fix plywood strips across the holes to secure my patches. It gives a more solid job bit given the busy state of what was behind, i should have opted for leaving the paper wide on the patching gyprock and sticking it with the mud. It was behind cabinets anyways.
So, as im screwing on one of the plywood scabs, I felt a drain pipe right behind. I aim above to avoid it and set the screw. Screw goes into something but to my dismay it isn't the ply, it was a water line tucked right in behind the drain that i could feel because of that.
I do know my own plumbing but it was still a pain because i had to undo a lot of drain pipe that was in proximity to do my sodder joint.
It actually got worse after that. While doing that fix, we had to drain the lines. The Housekeeper reopened (because we'd shut then off after draining) a handheld shower fixture for the upstairs clawfoot tub, meaning to clean it and left it pointed towards the floor. She didn't realise it was on because the shutoff was still turned off. So when i put the water back on from the main shutoff in the basement i listened to it continue to run for a moment, and then beyond what it should have to fill any empty toilets. I shut it back off but the mess was already made. The previous installer had not closed the openings where the water lines passed through the tile floor for the clawfoot and all that water went into the newly finished kitchen below. What a day I tell you!
We kept our cool. Opened all the pot light holes and mopped that ceiling space with sponges like nobodies business! Saved the ceiling and ther kitchen. Set a fan and vacuum to move air through the space and had only minor plaster and paint repairs.
That being said, you should roll with a push-to-fit shutoff valve in your case. Open the shutoff, jam it on the broken/ cut end of a pipe and then close the valve. It could be a real lifesaver.
Kiwi living in Denmark! Loving the videos, I've watched them all during quarantine, and love the fact your using a hilti tool I use them every day at my job here and I swear by them!
leetzy1 🇩🇰🇩🇰🇩🇰🇩🇰🇩🇰
Dougie?
That Hilti hammer is a beast. I rented one last year when my medium Makita wasn't cutting it on a basement job I was doing. Hilti made me look sideways at my trusty Makita hammer.
I'm a flooring installer and I use those flexible buckets to they are awesome, specially for mixing our floor repair or leveling compounds.
Clever how you got some constant water flowing from that pipe to help control the dust. ;)
I oil,.
Kkkj,k,
,,KY,kkkk
Klkkklklkkkkkook
Qqaaa
@@pavitraarunabiq
pqqql
Great to see you back on working. Greetings from Estonia 🤘🤘🤘🤘
Hilti is tops for masonry buildings. I've cut grooves on old brickwork for new cables with one of them. Pure joy.
Another great video looks like a nice little project to be working on at the moment with level 3 restrictions, saw you driving the other day on Remuera road you waved back to me, I knew I would bump into you one day! Thanks Scott Brown Carpentry!
I was on a viaduct job once and we bought in a bunch of TE-6a’s. somebody dropped one about 30-40 metres into a river at the bottom and it was in there a couple of days until the river went down enough to go and fish it out. Took the case off banged all the grit out, left it on a radiator overnight and it fired up no problem with a fresh battery. Awesome tools.
Informative SBC. The concrete cutter looks like a heavy beast!😎
Love this guys videos. Hes honest and true and love the way he keeps his mistakes in, we ALL make them
Man, your really treating us well this week👍
As a homeowner, I've actually found that my 26 lb demo hammer (roughly equivalent to this one) has proven to be one of the more useful tools in my garage. I live in a place where the soil is pretty dense hardpan clay, so using my hammer with a space bit just makes digging super easy. I also had to remove half my concrete driveway, which was pretty thick and reinforced, and found that my little demo hammer did nearly as good a job as the jackhammer I rented, and with way less fatigue (26 lbs < 70 lbs, who knew). While some jobs can be handled with a variety of tools, some more efficient than others, the kinds of things a demo hammer can do generally don't have great alternatives.
Love your videos so much Scott! Much love from Melbourne 🇦🇺🇦🇺 
He didn't really use the Hilti, the concrete just jumped out of fear that might really use it.
Lmao
Brilliant.
I love Hilti products!
All the best from Norway :-)
Good to see someone using a rotary hammer the way it's meant to be used. See lots of people on the internet reefing on it and even putting full body weight on it when chopping up a floor like you do here. For anyone that doesn't know: you want the weight of the hammer itself to smack against the chisel. When you put your weight onto it it essentially divides the power between hammering the floor and hammering you.
Hilti makes the best commercial tools hands down!!
Great video.... love sitting here in America and watching tips and tricks from New Zealand....
I was just going to suggest that you learn to do emergency plumbing repairs, but then you said it yourself. Lol, you're awesome man.
Man, i should learn how to keep calm like you. Because once I do a mistake during work i just freaks out.
Now that was an exciting episode!
as a DIY'er I find the right tool really makes the job much easier....that being said I am forever buying hand tools for "one off" jobs...
Nothin wrong with a large collection of unused tools that you bought for one off jobs. One day your livelihood might rely on what tools you have, especially considering this virus has the world leaders crashing every economy.
DdfxcxdsdddsAdddxzAasxč
Nice to see you back at work Scott.
The smaller Hilti Rotary Hammer is amazing too. Way less heavy and perfect for jobs like this, as well as securing bottom plates to concrete.
On the odd occasion where major concrete demolition is required I have hired jackhammers to do the job. Some time ago ALDI had a big jackhammer for $200. I picked one up just to have one at the ready. I am amazed at just how good it is for the price. If I was using one weekly I would get a quality brand, but for the couple of times a year I need it, the ALDI jackhammer is awesome.
Yeah I got a reasonably cheap one myself and it does the trick. Wouldn’t want to be using it all the time though.
That tool looks like a beast!
Dude, you handled that so well.
I've got the Makita one which is a 20lb impact VS the 15.5lb impact on the hilti. IT'S A LIFE SAVER.
I demo'd an ensuite bathroom that had 2 inches of concrete behind floor to ceiling tile, on every wall and floor, plus 5 inch thick concrete shower pan.
There was nearly 4000lbs of concrete and tile removed. I wouldnt have been able to do it without that tool!
Hilti is nice, but a nice air-powered hammer blows those things away. It's the same jump btwn residential to commercial as it is commercial to public works. Fire up the tow-behind compressor, grab a hammer and a hose and start blasting away. Used to set up venturi air blowers to push all the dust out.
Hilti is the real deal! And if you're a pro... The service is great. At least it is here in NL. If you need them they will be there the same day mostly 😬
Hilti is the best by far, but damn you need to pay the price aswell
Nl present!!!
That’s how it was in Canada. Now because of the situation they can’t come in person.
@paso fino Netherlands
There is a relatebel brand to hilti called duss, same quality as well
Your videos are relaxing to watch
Aye, always something happens eh? Sods law, expect the unexpected, and aye, learn some plumbing skills Scotty boy! Lovin' the vids, I've learnt loads fella, thank you from Scotland!
I'm kind of an old guy, @1:30 I just remembered the Val Kilmer scene at "Top Secret" movie....OH geezuz....
Greetings from Lockdown Hemel Hempstead All the Best Scott
We use the bigger Hilti jackhammer at work and that things a beast, hits twice as hard as the makita and weighs so much less
Wait, the plumber came? Wow, this is diffrent from germany.
"Imma come somewhere inbetween 5 am and 11 pm"
Try In California when they show up in two days
That's because he's a South African!
No, you don't get a plumber this quick in Australia/NZ. Try a few weeks. :D If you are lucky. :D This is yutube video. The guy is obviously affiliated with this plumber.
@@julianpetkov8320 It's more of the fact that Scott is subcontracting that exact same plumber for work in this very bathroom at a later date.
And I'm sure all tradies prefer doing contract work as opposed to house calls. On a jobsite you know you'll be paid in full and on time 9/10 times.
Ridiculous how that concrete pad just lifted like that - spent a week breaking up a concrete carport pad with a sledgehammer and could have done with that Hilti breaker!
@16JAM77 Good luck getting cement mosaic when it is properly done tho! That would have been fun to watch. :D
It is refreshing to see someone using quality tools, not milwauke or dewalt like everyone else.
I spent the first 3 years of my apprenticeship behind a hilti breaker most days. over the duration of that time i got to use a wide variety of models from the TE-1 through to the TE-3000.
After a while, the firm allowed me to hang onto my preferred tools, a 20 year old TE-706 and a rusty old barrel wet vac.
The secret to these awesome tools is weekly maintenance and warming it up before use. I'll let it warm up for 15 mins before before use.
Really miss using Hilti tools, the new firm i work for use makita, which makes me feel like im hitting my head against the wall every time i use them.
You don't think Makita is good quality or are you saying that compared to Hilti, everything else just seems 2nd class?
Are u a head banger aka into heavy metal
Used a hilti te 800 avr to make space for some heavy af copper pipes. The thing went through concrete, specifically 10cm thickness, like nothing. The only thing is that they gave it to us without the handle, so my forearms were tired af after the whole deal, so make sure they have the handle for it before doing any heavy work with it.
My Team love Hilti here in London.
I've broke out 100's of concrete floors in bathrooms doing walk in showers. Always Check where stop tap is, gas meter and consumer unit. I've hit a few pipes over the years. gas and water. Not so bad when you know where to isolate. I'm a plumber so could fix myself.definitely worth learning basic plumbing skills and electrical.
I use that set up with he Hepavac to do over headchipping on Columns and on the core. Love them they making strong I chip 8 hours almost everyday then I do patch work or pour concrete
It’s helpful to see you make mistakes and handle them well.
The hilti wsc85 circular saw is a dream if you ever need the 85mm cut depth, and I have a TE52 HAMMER OF GOD drill and a DD100 corer that are both about as old as you and simply refuse to die 👀 they were old before I got them! I'll replace them one day, maybe when I replace all my teeth for falsers, but probably not before!
Nice work Scott, keep it up!
the Makita HR4013C 1100W 40mm SDS Max Rotary Hammer
Is really good for light work.
I was using there 16-40kg Hilti Jack hammer the other day it's a beast
Went through the concrete like butter, will do Upto 300 mm thick concrete.
Literally have no idea who I just watched!? No introduction!? This video has clearly been uploaded to the wrong channel!?
Richard Hibbs - 🤣 A lot of us miss that introduction!
I have the bosch gsh 11e, i have a older type it hits with 20 joule.
They even have a newer one that hits with 23 joule.
The Hilti you have there is fast pace pound, going off on the sound and what i see i think the 21 joule is lab based under perfect circumstances.
The Bosch pounds in a different pace its slower, what a beast.
I always bring in my Atlas Copco diesel 160 c.f.m compressor then link to A.p.t, Atlas-Copco, Sandvik and Ingersoll Rand hammers from my library. Electric its Makita and Atlas-Copco and recently just got a Bosch.
Hey Scott, what‘s you camera and mic setup? Anything good you could recommend for filming in workshops?
I have a Hilti Te-17, it is older than I am and still works awesome but is heavy compared to the newer hammer drills. I wonder how that stacks up to my big Hitachi and Makita SDS-MAX.
The best deal I have ever gotten was at a yardsale, Hilti 2x23 inch SDS-MAX hammer drill bit still sealed in the tube for $10!
From a demo perspective (which this chippy works in), the TE800 is a brilliant tool, just saying...it fits in well for floor and wall demo, where the 1000 & 1500 are too cumbersome (especially for o'head work)...and the TE60 for wall tiles and the like. HILTI are on to a winner with the TE800 👍🏼👍🏼👍🏼 I'd consider one Scotty if I were you 😁😁😁
The video shows an ultra light job for a heavy monster hammer drill.More powerful from this one are only the compessed air hammerdrills.This opens a hole to the down floor rapidly if working in full power.
Shark Bite caps are great to have on hand to quickly cap a pipe without soldering.
HILTI Made in Germany Tell me, was that a German plumber? So quick and thorough and fun! "I'll be back, Asta La Fista!"
In Sweden there are companies where you can rent machines like that, so if you have a rare job in need of the heavy atillery, there is no need to go on with the small everyday tools wasting time. You can also rent them as a private home owner. I've rented a rock drill powered with a diesel compressor on a trailer. Made all holes i needed in one day. Drove it back. Popular by small contractors, but also used by larger companies. Machines not used in every project just cost money. And if you take on a larger job than your machine park can handle, you rent the rest. They have about everything you might need.
Isn't it the same in NZ?
thats funny bro.i said yes to doing a bathroom reno and expected my little kanga to jackhammer up some old solid 80 - 100mm screed and realized we were going nowhere fast.i shot off to get a bigger weapon from Sydney tools.ended up purchasing the hikoki 1400 watt demo jackhammer and breezed through it.the downfall is i haven't had to use it for over a year.the thing cost $1200 bucks at the time but at least i have it aey daaahaha
HI Scott great to see you back up and running! Where is Paerau! :-)
Got to use one of these yesterday. It is ridiculous.
I got a Bauer one from harbor freight with a coupon for 160 and it’s great! Took a three story high concrete chimney down with it. It’s an sds max
Ah, taking out the concrete for a more "Open Concept"
-Randy Marsh
Finally he's got some HILTI gear 😍
In the show Arrested Development, the city of Reno's motto is, "Make The Biggest Little Mistake Of Your Life"
If you're intersted I used the counterpart of Makita. The biggest portable Hammer they have. It's impressive how those machines goes through reinforced concrete with lots of metal rods.
4:30
I use the same basket for my laundry 😁
Me too !!
Great tool. Use the 500 and 1500 and both are beasts for the relevant work. Wouldn't go back to air tools now!
Hilti make the best electric demo hammers, hands down. They are just ridiculously expensive.
Hook up the hilly shop vac a few inches from the blade of the jack hammer. We did that alot to help cut down on dust and clogging up our respirators.
You're right Hilti tools are expensive. They generally are a leader in developing tools and fasteners. They do work, they do last and the company supports them, all good things. I often use other less expensive but well made brands of tools that are also very efficient. Tool economics is important. That was a minor job for that heavy a tool. But an electric jackhammer does needs to be heavy to be effective.
All this great tools you can use for our European houses. In the USA, with their cartboard houses, you could use "Parkside" from LIDL. They`d do that too!
Worst feeling ever that. I keep finding them with the multi tool. Keep up the hard work man 👍🏻
I hit my first pipe year before last... under a wobbly floorboard where I screwed down into an end corner, thinking it would be fine because what kind of plumber puts pipes under the corners... well that was a day down the drain.
The best set up for any a great building team - Hilti lazer, concrete remset gun and a concrete breaker.
What are your thoughts?
Absolute legend
It would be nice to see how well the vacuum works on that Hilti We saw you working with the vacuum, too bad we didn't see a short example of working without it, just to show the difference.
Mr.Brown, I'm Freak of Tools like You & Hilti Tools Are my Crush
What do you use to record with ?
When reframing a room is it easier to just cut the previous frames at the nails between seams or prying the nails apart with a crowbar?
This is the perfect job for an ozito rotary hammer drill, $150nzd, the right price point for something you don't use every day and they just keep going(great with a scoop attachment for chasing walls/floors). You'll still want to hire a full size kango for the big jobs.
This machine was way bigger than it would have needed. But I like big machines so thumb up !
Hilti is good but very expensive here in the UK. I know a lot of tradesmen that actually lease tools from them and pay a monthly fee which is pretty cool if your starting out and don't have tools. We have some hilti tools,in particular the old nail gun with the cartridges,bloody powerful thing. Has to be at least 20 years old and still works great
i bought an old primary school to convert to live in and had a lot of demo. to do so i bought two spare and repair hilti 706 breakers from e-bay, and i sent them to hilti for a service repair for £165.00 each they fixed them and i had a 6 month warranty 5 months later one started making funny noises sent it back, and one new motor later got it back no bill, that was 8 years ago and they're still going strong, hilti has a well earned reputation but like everything else the older models will last longer than their modern tools
Hasta la vista amigo !! 👋👍😁