A buddy updated his MP1 and hasn’t been able to use for I think years. Asked me if I’d have a wack at it. He’s pretty savvy but a second pair of savvy eyes never hurts. Thank you for the content good sir!
I bought it from the original owner and I can't contact him to get the email associated with it, what should I do to delete the account of the original owner؟
Hello, if I start DJI assistant 2 for Mavic and connect DJI Mavic 2 Zoom to PC, I do not see the option RESTORE FACTORY DEFAULTS. Why? Do you have any advice? Thanks
The last time I used my mavic was two years ago and it just fell out of sky but long story short is I just took it out of case for first time and is it salvageable or time for trash?
@@WhirlyBloke I paid a good amount for the Mavic pro 4yrs ago and watching videos for new ones but I don't want to drop another $1k on a new one but your video is three years old and now Mavic pro seems to be obsolete🤔 but is there new updates and are you still using your Mavic pro?
Unfortunately this didn't work for my Mavic Pro, the 'DJI Assistant 2 for Mavic' on Mac shows the message 'Device Not Supported'. So I tried the older Assistant, but this application isn't compatible on the current version of MacOS. So unfortunately not the same experience as shown in your video. Thanks DJI!
I had that issue too. Solved it by installing trial of Parallels Desktop with Windows 11 in it, then go download the WIndows version and then the Assistant tool.
Hi there! I'm sorry to hear that you're having trouble connecting your DJI Mavic Pro drone to your computer via USB. There could be a number of reasons why your computer isn't recognizing the drone, such as an issue with the USB port or cable, or a software problem on your computer. One thing you could try is using a different USB cable to connect your drone to your computer. Sometimes, cables can become damaged or worn out over time, so using a new one might help. Additionally, you could try connecting the drone to a different USB port on your computer to see if that makes a difference. If none of these steps work, you might want to consider reaching out to DJI customer support for further assistance. They may be able to offer additional troubleshooting steps or advise you on how to resolve the issue. I hope this helps, and best of luck getting your DJI Mavic Pro connected to your computer!
@@WhirlyBloke I contacted DJI they said download their software which I did, however I can’t get it to work and they were no help, so now I have a drone I can’t sell and don’t use
@@AliceFordAdventures Maybe it's a MacOS version issue. DJI have a habit of not maintaining backwards compatibility to make sure you buy new stuff. Not good.
DJI are gradually restricting this type of behaviour. Later versions of the Mavic firmware have stopped this, so I suspect the Mavic Mini is the same. I'll check it out on my MM2.
I'm a bit behind on your vid. Does this only restore the flight history and your name and email and so on, or does it reset any updates to firmware back to factory also?
Nothing against this video, but I'm a bit mad at DJI because they removed the ability to reset drones to factory defaults with the Air 2... Just tried today and the new DJI Assistant doesn't have the Reset Factory Defaults option in the sidebar. It did on previous version for previous generation models (like the Mavic Pro, Original Air, etc). Found on some forums that this is either "not compatible" or "can't be done" according to the DJI forum (a response from a DJI rep) which is a bunch of B/S. Plus this is a privacy/security concern, particularly if you fly around your backyard or something. Plus I noticed the log data is HUGE, even for a simple 10 minute flight I had about 80 or 100MB of data in some cases.... I'm wondering if it's storing imagery in that log file too... anyway, thanks for the video though as it's helpful, but too bad it doesn't work with the newer DJI drones and that DJI removed this function out of their Assistant app.
So i am having this issue imu not calibrated and when i try to click on start it does not function. What should i do i did refresh the firmware from dji assistant app. Any help? Any suggestions??
Beautiful. I had to use a "quality" USB cable to connect to my laptop. Installed the app (don't approve firewall bypass - just close the window with the "X" or "cancel"). I was able to update the firmware and fly my drone. Thank you so much!!!
Thank you for a helpfull video! Please clarify - does this process REALLY erase ALL data from previous use of Mavic, including the black box and all activation information? The second question is - how to check if your Mavic has been activated before and has it been used - or how to check that you are buying an ABSOLUTELY new one? Thanks for your answer and advice!
@@khalodhMaybe contact the previous owner again. Other than brute force I don't know what you can do. I suspect it's a trap lots of people fall into these days with products you have to register before you can use them.
Great Video ;) One question: Is the Mavic Pro still bound to the remote controller after the factory reset? I am just selling mine and want to make it easy for the next owner. Thx for any reply
There is no factory reset on the Mavic Mini 1 or 2 regardless of what other websites may say. The simple reason is it has no internal storage and all data is stored in the DJI Fly app, so there's nothing to do if you plan to sell it on. Any data is stored on your phone.
@@WhirlyBloke Hi! Thank you for the video, great explanation. I have a Mavic Pro Platinum 1, i just sold it and can't reset it or unlink my account, is this because it's old? Te same explanation you gave up here? Thank you.
Great video mate! Thank you>>> Question: I already sold my Mavic and gave it to the new owner and didn't know I needed to do this!!! Stupid me, I know. Any Ideas what to do? Can I restore the factory settings without physically having the drone with me? If not Should I tell the new owner to do it? I don't think he can fly it without my DJI account or resorting factory settings and starting his own, new DJI account. Any help or suggestions is much appreciated :)
There's nothing you can do. But in all likely hood, the new owner will have reinitialised it. As a precaution, it's probably a good idea to change your DJI account password. I do that anyway when I sell gear even if I've reset it. Trust no one.
@@WhirlyBloke so what exactly should I tell the new owner to do? he has the DJI go 4 app but it won't connect to the Mavic is what he is telling me... I guess he has not yet made an account but needs too?
@@AdventrureforAlan He needs to read the instructions. He needs to create a DJI account and register the Mavic just as he would do if bought a new one. And he should do a factory reset if that doesn't work.
hi ,u make a easy instruction,than you can u help me ,,i just upgrade the newest software and now i cannot see live streaming video on my phone screen is black..i can see the setting but no video at all...
@@WhirlyBloke Ok thank you, now my drone have a bad signal if the 2GHz is activate, but I need to change the default dual signal to 5GHz every fly. How to fix it please?
Does this also resets the data of how many hours it has been used? I want to buy one and was wondering if I logged in as a new owner if those records are still going to be available.
Hello my internal storage is full in the smart controller I have deleted as much as I can and still don't have enough room to update should I do a factory reset I don't know what too do
Unfortunately DJI have put measures in place to prevent this now if you have subsequently updated to a later firmware version. However, with newer drones, including the Air 2, all you need to do is remove your account from the DJI Fly app.
@@herremir8559 Power on your DJI Mavic Air 2 and ensure it is connected to the remote controller. Open the DJI Fly app on your mobile device and log in to your DJI account. Once logged in, tap on the top-right profile icon to access the account settings. In the account settings, look for the "Connected Devices" or "Device Management" option. The exact name may vary depending on the app version. Under the connected devices section, you should see your DJI Mavic Air 2 listed. Tap on it to access the device settings. Inside the device settings, you should find an option to "Remove" or "Disconnect" the device from your DJI account. Tap on that option. A confirmation prompt may appear asking you to confirm the removal or disconnection. Confirm your action to proceed. Once you have successfully disconnected the Mavic Air 2 from your DJI account, you can proceed to reset the drone to its factory settings to remove any personal data and settings. It's important to note that disconnecting the drone from your DJI account will remove any flight records associated with that account from the DJI servers. However, it's still recommended to perform a factory reset to ensure all personal data is removed from the drone before selling it. The exact procedure for a factory reset can be found in the DJI Mavic Air 2 user manual or by contacting DJI support.
I turned off the drone and turned it back on the power button doesn't work I waited 6 hours I restarted and it turned on and when I turned it off it didn't work Mavic mini 2
Probably driver related. Catalina is full of issues so I'm keeping well away and upgrading the OS on a Mac is usually a bear trap. Let me know if you find a fix.
@@WhirlyBloke UPDATED: You have to go into settings and unlock security and privacy settings. You also have to DL the general assistant 2 (if you do the mavic one, it will not let you run it).
@@JamesClarke01 Thanks for sharing. I have the same issue on MacOS Monterey and haven't been able to find a solution for my Mavic Pro. The current 'Assistant 2 for Mavic' V2.0.14 isn't compatible with the Mavic Pro, go figure, and the old Assistant V1.2.4 isn't compatible with the current version of MacOS. You would think DJI would make the 'for Mavic' Assistant compatible with their whole Mavic range. Seriously DJI!
Great tutorial! Unfortunately, DJI said not possible to hard reset Mavic MINI to factory settings. The other mistake I made was downloaded the incorrect Assistant 2 for Phantom, instead of Assistant 2 for Mavic. Hope this helps someone else out there! ps-Mavic mini returned because controller was defective and couldn't hold a battery charge, took forever to charge.
I just bought a used Mavic Pro and have access to both the sellers and my own DJI accounts. The problem is when following your video my Mavic Pro doesn't show up, hence I cannot factory reset it? Any idea what I can do now?
@@WhirlyBloke Thanks for replying and pointing this out! I will check it out and update drivers if needed. This was on my Windows computer, but I will also try it on my wife's Mac Book Air.
@@WhirlyBloke Now I tested on the Mac and all problems solved. It found my Mavic Pro and I could Factory Reset it, and now I also have access to all the features! So again, thanks for pointing this out to me :)
If you purchase a DJI Mini Pro 3 that is already bound to another account, you can reset it to factory settings and then bind it to your own DJI account. To reset the drone to factory settings, follow these steps: Turn on the drone and remote control. Connect your phone to the remote control and launch the DJI Fly app. In the app, go to the "Me" tab and select "Settings." Under "Settings," select "General" and then "Reset Settings." Select "Reset to Factory Settings" and confirm the action. After resetting the drone, you will need to go through the setup process again, including connecting to your phone and creating a new DJI account if you don't already have one. During the setup process, the DJI Fly app will guide you through the steps to bind the drone to your account. It's important to note that resetting the drone to factory settings will erase all data on the drone, including flight records, camera settings, and other preferences. So, make sure you have backed up any important data before resetting the drone.
did anyone had a clue on factory reset there MAVIC PRO yet? its 2023 of april an i cant either do it. anybody kindly asist me , before i sell it to a new owner.. thankx in advance
To perform a factory reset on your Mavic Pro, you can follow these steps: Turn on your drone and remote controller. Connect your mobile device to the remote controller and launch the DJI GO 4 app. In the DJI GO 4 app, tap on the three dots icon in the top-right corner and select "Remote Controller Settings". Under the "Advanced Settings" section, select "Reset to Default". Tap "Reset" to confirm the factory reset. Please note that this process will erase all of your drone and remote controller settings, including your flight logs and other personalized settings. Therefore, be sure to back up any important data before performing the factory reset. If you are still having trouble with the process or the drone does not respond as expected, you may need to contact DJI customer support for further assistance.
Wow, selling your DJI Mavic Pro with a factory reset is a smart move. It ensures that the new owner can start fresh, and it also protects your data. Great job on mentioning this important step.
![DJI Remote Not Connecting To Drone [Fixed]](http://i.ytimg.com/vi/Rec2qhWxdjo/mqdefault.jpg)
Lovely mate. Thank you Kindly. Brilliant execution!
@@ericfrederickson555 my pleasure.
A buddy updated his MP1 and hasn’t been able to use for I think years. Asked me if I’d have a wack at it. He’s pretty savvy but a second pair of savvy eyes never hurts. Thank you for the content good sir!
You saved me! Just was about to sell my Mavic 2 Zoom, glad I found your video first! Cheers
It's really important to don't give your DJI account details away. Simple but important. Glad it helped.
I bought it from the original owner and I can't contact him to get the email associated with it, what should I do to delete the account of the original owner؟
You definitely earned a new subscriber and thank you for such a quick response
Thanks loads.
can i reset it , using now owner login credential on dji assistant software ?
I'm sending my drone out today and almost forgot to do this! Thanks for your tutorial.
Hello, if I start DJI assistant 2 for Mavic and connect DJI Mavic 2 Zoom to PC, I do not see the option RESTORE FACTORY DEFAULTS. Why? Do you have any advice? Thanks
The last time I used my mavic was two years ago and it just fell out of sky but long story short is I just took it out of case for first time and is it salvageable or time for trash?
You'll always someone who'll buy it for spares of you don't plan to repair it.
@@WhirlyBloke I paid a good amount for the Mavic pro 4yrs ago and watching videos for new ones but I don't want to drop another $1k on a new one but your video is three years old and now Mavic pro seems to be obsolete🤔 but is there new updates and are you still using your Mavic pro?
A really informative video. Thanks for the info.
No problem. Thanks for watching.
Unfortunately this didn't work for my Mavic Pro, the 'DJI Assistant 2 for Mavic' on Mac shows the message 'Device Not Supported'. So I tried the older Assistant, but this application isn't compatible on the current version of MacOS. So unfortunately not the same experience as shown in your video. Thanks DJI!
I had that issue too. Solved it by installing trial of Parallels Desktop with Windows 11 in it, then go download the WIndows version and then the Assistant tool.
When one BOUGHT a not reseted drone, what can he she it do if there is no account and pwd delivered?
Unfortunately you need the seller do this. Even DJI can't help which is a big problem.
Is there a way of resetting the controller to factory settings?
Thanks for this video, I'm actually selling my Mavic air, but I'm guessing the process is exactly the same yes?
Yes it will be similar. The important thing is just doing it whatever the process. It's about personal data protection. Thanks for watching.
Do you have to factory reset the actual controller also?
That's what you're reseting. The M2P doesn't store any DJI account information.
I can't get my computer to recognize the drone using USB any bypass for this?
Hi there! I'm sorry to hear that you're having trouble connecting your DJI Mavic Pro drone to your computer via USB. There could be a number of reasons why your computer isn't recognizing the drone, such as an issue with the USB port or cable, or a software problem on your computer.
One thing you could try is using a different USB cable to connect your drone to your computer. Sometimes, cables can become damaged or worn out over time, so using a new one might help. Additionally, you could try connecting the drone to a different USB port on your computer to see if that makes a difference.
If none of these steps work, you might want to consider reaching out to DJI customer support for further assistance. They may be able to offer additional troubleshooting steps or advise you on how to resolve the issue.
I hope this helps, and best of luck getting your DJI Mavic Pro connected to your computer!
@@WhirlyBloke I contacted DJI they said download their software which I did, however I can’t get it to work and they were no help, so now I have a drone I can’t sell and don’t use
@@AliceFordAdventures Maybe try a Mac. I've never had any USB issues.
@@WhirlyBloke that’s what I was using
@@AliceFordAdventures Maybe it's a MacOS version issue. DJI have a habit of not maintaining backwards compatibility to make sure you buy new stuff. Not good.
Hello sir. Thank you for the video.
Will it work for Mavic 3?
I'm afraid not. DJI plugged the hole pretty fast.
Hi. Have subscribed now. Thanks, great tutorial. Does this technique work with the Mavic mini?
Thanks, Dave
DJI are gradually restricting this type of behaviour. Later versions of the Mavic firmware have stopped this, so I suspect the Mavic Mini is the same. I'll check it out on my MM2.
I'm a bit behind on your vid. Does this only restore the flight history and your name and email and so on, or does it reset any updates to firmware back to factory also?
It just resets the Mavic settings to factory and disconnects it from your DJI account.
Nothing against this video, but I'm a bit mad at DJI because they removed the ability to reset drones to factory defaults with the Air 2... Just tried today and the new DJI Assistant doesn't have the Reset Factory Defaults option in the sidebar. It did on previous version for previous generation models (like the Mavic Pro, Original Air, etc). Found on some forums that this is either "not compatible" or "can't be done" according to the DJI forum (a response from a DJI rep) which is a bunch of B/S. Plus this is a privacy/security concern, particularly if you fly around your backyard or something. Plus I noticed the log data is HUGE, even for a simple 10 minute flight I had about 80 or 100MB of data in some cases.... I'm wondering if it's storing imagery in that log file too... anyway, thanks for the video though as it's helpful, but too bad it doesn't work with the newer DJI drones and that DJI removed this function out of their Assistant app.
That's DJI for you. Like Apple.
So i am having this issue imu not calibrated and when i try to click on start it does not function.
What should i do i did refresh the firmware from dji assistant app.
Any help?
Any suggestions??
Thank you, clear and concise
I just got My zoom 2 yesterday, did as you say, but I do not have the option to do a factory reset. I dont see the 2 blue boxes
Can you factory reset my magic pro
Beautiful. I had to use a "quality" USB cable to connect to my laptop. Installed the app (don't approve firewall bypass - just close the window with the "X" or "cancel"). I was able to update the firmware and fly my drone. Thank you so much!!!
Thanks for watching and the feedback.
Thank you for a helpfull video! Please clarify - does this process REALLY erase ALL data from previous use of Mavic, including the black box and all activation information? The second question is - how to check if your Mavic has been activated before and has it been used - or how to check that you are buying an ABSOLUTELY new one? Thanks for your answer and advice!
As far as I know, yes.
@@WhirlyBloke ok, but how to check if your Mavic has been activated before and has it been used?
Thanks I am buying a used drone and your video popped up good info
i bought mavic 3 online and the first owner refused to unlink the drone from his account!
what can i do?
Maybe contact DJI support.
@@WhirlyBloke i did and they said we can't do nothing as the police said same thing
@@khalodhMaybe contact the previous owner again. Other than brute force I don't know what you can do. I suspect it's a trap lots of people fall into these days with products you have to register before you can use them.
This applies to all dji drones right? Looking to do this to my mavic air
Correct, it does apply to allDJI drones.
The factory reset does not show up on my screen
Depends on the drone and firmware you've installed. DJI disable or hide the button as they please - unfortunately.
Great Video ;)
One question: Is the Mavic Pro still bound to the remote controller after the factory reset? I am just selling mine and want to make it easy for the next owner.
Thx for any reply
Yes, it is
@@WhirlyBloke Great - thx for the quick answer
Do you need to be "registered" as the owner in order to reset to factory settings?
You need a DJI accoynt to activate the Mavic.
@@WhirlyBloke I have that, but I guess you need to be the former owner in order to reset the drone. The factory reset button isn't available to me
Hi, how are you?, im about to buy a drone but i dont know if is registered, today work the reset for this models? Like mini or se? Thanks!!
Is this the same process for de-registering a DJI Mavic Mini ? Any info would be greatly appreciated. Kindest regards :)
There is no factory reset on the Mavic Mini 1 or 2 regardless of what other websites may say. The simple reason is it has no internal storage and all data is stored in the DJI Fly app, so there's nothing to do if you plan to sell it on. Any data is stored on your phone.
@@WhirlyBloke Hi! Thank you for the video, great explanation. I have a Mavic Pro Platinum 1, i just sold it and can't reset it or unlink my account, is this because it's old? Te same explanation you gave up here? Thank you.
is it going to be the same method if i wana sell away my mavic mini sir?
IS THERE ANY WAY TO DO THIS FOR THE MINI 2? :/ This is absurd for a $400 drone. My drone app says it's already bound to another email.
The Mini 2 works differently and you just disconnect it from the DJI account in the Fly app.
@@WhirlyBloke Yes, the original owner can. If they don't, then it stays bound and you cannot remove it.
Hi, how are you?, im about to buy an used mini or an se, today its abaible to reset and bound new account?!!
@@X3MUruguayHD not that I found, just have the owner unbound it if you can first. The original owner has to.
I can’t delete my mavic 2 pro. I have the options to upgrade the software but not for restore factory
Unfortunately, DJI seem to be locking down and removing these features.
Great video mate! Thank you>>> Question: I already sold my Mavic and gave it to the new owner and didn't know I needed to do this!!! Stupid me, I know. Any Ideas what to do? Can I restore the factory settings without physically having the drone with me? If not Should I tell the new owner to do it? I don't think he can fly it without my DJI account or resorting factory settings and starting his own, new DJI account. Any help or suggestions is much appreciated :)
There's nothing you can do. But in all likely hood, the new owner will have reinitialised it. As a precaution, it's probably a good idea to change your DJI account password. I do that anyway when I sell gear even if I've reset it. Trust no one.
@@WhirlyBloke so what exactly should I tell the new owner to do? he has the DJI go 4 app but it won't connect to the Mavic is what he is telling me... I guess he has not yet made an account but needs too?
@@AdventrureforAlan He needs to read the instructions. He needs to create a DJI account and register the Mavic just as he would do if bought a new one. And he should do a factory reset if that doesn't work.
appreciate the help
hi ,u make a easy instruction,than you can u help me ,,i just upgrade the newest software and now i cannot see live streaming video on my phone screen is black..i can see the setting but no video at all...
Try rolling back to a previous version.
Beautiful. But I doesn't have the buton Factory reset in my software
It looks like DJI have removed it in later versions of the Assistant.
@@WhirlyBloke Ok thank you, now my drone have a bad signal if the 2GHz is activate, but I need to change the default dual signal to 5GHz every fly. How to fix it please?
Does this also resets the data of how many hours it has been used? I want to buy one and was wondering if I logged in as a new owner if those records are still going to be available.
No, you won't see the previous owners flight data.
@@WhirlyBloke so there is no way to find out how many hours it has been used?
Hello my internal storage is full in the smart controller I have deleted as much as I can and still don't have enough room to update should I do a factory reset I don't know what too do
Back it up, delete everything to make space, install the update and restore whatever you need to.
@@WhirlyBloke Thanks for the advice I have been looking everywhere just to get this info thanks mate👍
i do not have a restor factory and i can not restor my mavic air 2 and i need a help? how can i set up new sistem on joystick,thank you
Unfortunately DJI have put measures in place to prevent this now if you have subsequently updated to a later firmware version. However, with newer drones, including the Air 2, all you need to do is remove your account from the DJI Fly app.
@@WhirlyBloke thank you very much,i must see now in app ;)
@@WhirlyBloke i truy now but do not work all same set up(fuck)
@@herremir8559 Power on your DJI Mavic Air 2 and ensure it is connected to the remote controller.
Open the DJI Fly app on your mobile device and log in to your DJI account.
Once logged in, tap on the top-right profile icon to access the account settings.
In the account settings, look for the "Connected Devices" or "Device Management" option. The exact name may vary depending on the app version.
Under the connected devices section, you should see your DJI Mavic Air 2 listed. Tap on it to access the device settings.
Inside the device settings, you should find an option to "Remove" or "Disconnect" the device from your DJI account. Tap on that option.
A confirmation prompt may appear asking you to confirm the removal or disconnection. Confirm your action to proceed.
Once you have successfully disconnected the Mavic Air 2 from your DJI account, you can proceed to reset the drone to its factory settings to remove any personal data and settings.
It's important to note that disconnecting the drone from your DJI account will remove any flight records associated with that account from the DJI servers. However, it's still recommended to perform a factory reset to ensure all personal data is removed from the drone before selling it. The exact procedure for a factory reset can be found in the DJI Mavic Air 2 user manual or by contacting DJI support.
pretty awesome video and thanks
Glad you liked it!
super useful thank you sir!
I turned off the drone and turned it back on the power button doesn't work I waited 6 hours I restarted and it turned on and when I turned it off it didn't work
Mavic mini 2
Try another battery.
Thank for your help but it is impossible to open it on MAC IOS. It refuse to open it as it is not approved by Apple!!
Not impossible. You need to go into your settings, security and privacy, general tab and allow DJI as a developer
Do you have to re-bind to the controller after the reset?
and how to do that?help me please 🙏🏼
sir my mavic pro is not connected with laptop so please help me.
Thank you for this video
No worries!
This does not work for Magic 2 Pro
What do you do if you do not have a USB connector in your laptop?
Time travel to the 21st century.😀
turns out DJI don't allow the factory reset you have shown in the 21st century.
Mr. Whirly Bloke Can I use this software to my SG907 Drone ? please help me :(
Sorry, no. Its DJI Mavic only.
just updated macOS to Catalina, and now the assistant says it's not working with this version of Mac. anyone else having issues with this??
Probably driver related. Catalina is full of issues so I'm keeping well away and upgrading the OS on a Mac is usually a bear trap. Let me know if you find a fix.
@@WhirlyBloke UPDATED: You have to go into settings and unlock security and privacy settings. You also have to DL the general assistant 2 (if you do the mavic one, it will not let you run it).
@@JamesClarke01 Good find.
@@JamesClarke01 Thanks for sharing. I have the same issue on MacOS Monterey and haven't been able to find a solution for my Mavic Pro. The current 'Assistant 2 for Mavic' V2.0.14 isn't compatible with the Mavic Pro, go figure, and the old Assistant V1.2.4 isn't compatible with the current version of MacOS. You would think DJI would make the 'for Mavic' Assistant compatible with their whole Mavic range. Seriously DJI!
It did not work as there no more reset button 😑
hello can go to fly in nfz can you help ??
have nice helpfull many thanks
Thanks for watching.
how do you reset the mavic 2 zoom
Doesn’t deactivate the mavic pro.
Just resets all settings to default.
Thanks anyway
same happened to me
Cerberus new friend here 🤝 fellow Mavic owner 👍😊💯
I did this but I wasn’t able to factory reset my mavic mini ?? Please help
Maybe your USB drivers.
I downloaded the app for the Mavic Mini but there is no factory reset on my screen?
Unfortunately I sold my original Mavic Pro ages ago so I can't check it for you.
It's a différent app for new mavic in France. Maybe the same for you...
Great tutorial! Unfortunately, DJI said not possible to hard reset Mavic MINI to factory settings. The other mistake I made was downloaded the incorrect Assistant 2 for Phantom, instead of Assistant 2 for Mavic. Hope this helps someone else out there! ps-Mavic mini returned because controller was defective and couldn't hold a battery charge, took forever to charge.
It's good to hear others experience. DJI confuse things by having multiple apps that can be confused with each other.
Do you have to factory reset the actual controller also?
I just bought a used Mavic Pro and have access to both the sellers and my own DJI accounts. The problem is when following your video my Mavic Pro doesn't show up, hence I cannot factory reset it? Any idea what I can do now?
It may be your USB drivers.
@@WhirlyBloke Thanks for replying and pointing this out! I will check it out and update drivers if needed. This was on my Windows computer, but I will also try it on my wife's Mac Book Air.
@@StefanFahlberg Macs are generally trouble free when it comes to USB and Bluetooth.
@@WhirlyBloke Now I tested on the Mac and all problems solved. It found my Mavic Pro and I could Factory Reset it, and now I also have access to all the features! So again, thanks for pointing this out to me :)
@@StefanFahlberg I'm not an Apple fanboy by any means , but using USB on a Mac is so much easier than Windows. Glad you've got it sorted.
If I bye a dji mini pro 3 that is bound to another account I can reset factory setting. And put it on my account
If you purchase a DJI Mini Pro 3 that is already bound to another account, you can reset it to factory settings and then bind it to your own DJI account.
To reset the drone to factory settings, follow these steps:
Turn on the drone and remote control.
Connect your phone to the remote control and launch the DJI Fly app.
In the app, go to the "Me" tab and select "Settings."
Under "Settings," select "General" and then "Reset Settings."
Select "Reset to Factory Settings" and confirm the action.
After resetting the drone, you will need to go through the setup process again, including connecting to your phone and creating a new DJI account if you don't already have one. During the setup process, the DJI Fly app will guide you through the steps to bind the drone to your account.
It's important to note that resetting the drone to factory settings will erase all data on the drone, including flight records, camera settings, and other preferences. So, make sure you have backed up any important data before resetting the drone.
Will this work for all Dji drones
@@mikegregory8917 Things have changed on newer DJI drone. You just need to unlink your account in the controller.
No longer available for factory reset.
How do i reset begginners guide? On a inspire 2?
That's available in the DJI GO 4 app.
Somebody’s going around UA-cam sending scammer massages as you
Super. Thanks
Thankyou
You’re welcome 😊
Thankyou sir
No problem. Thanks for watching.
did anyone had a clue on factory reset there MAVIC PRO yet? its 2023 of april an i cant either do it. anybody kindly asist me , before i sell it to a new owner.. thankx in advance
To perform a factory reset on your Mavic Pro, you can follow these steps:
Turn on your drone and remote controller.
Connect your mobile device to the remote controller and launch the DJI GO 4 app.
In the DJI GO 4 app, tap on the three dots icon in the top-right corner and select "Remote Controller Settings".
Under the "Advanced Settings" section, select "Reset to Default".
Tap "Reset" to confirm the factory reset.
Please note that this process will erase all of your drone and remote controller settings, including your flight logs and other personalized settings. Therefore, be sure to back up any important data before performing the factory reset.
If you are still having trouble with the process or the drone does not respond as expected, you may need to contact DJI customer support for further assistance.
I try this method but drone is still in my account. Can you help me?
the bench listening to all transcripts.
Wow, selling your DJI Mavic Pro with a factory reset is a smart move. It ensures that the new owner can start fresh, and it also protects your data. Great job on mentioning this important step.
no longer gives you these options on the app :(
I don't believe it was ever an option in the app, only the Assistant desktop app.
@@WhirlyBloke that's what i meant. Desktop APPlication 😂
@@KylePieri It worked for me today so lol
Hi . I have same problem with my drone . Can I contact you in some why please ? Maybe on messanger ? Please
This may help. ua-cam.com/video/1AOmfud88Tc/v-deo.html
What if I already sold the drone?
Unfortunately, you're a bit stuck.
Waaaaayy too long. That video could have been 20 seconds.
Thaaaaaanks for the feedback.
If you sell your Mavic Pro Your an Idiot
Thanks for the info much Appreciated....😉