Anthem AVM 70 8K Review | This was the missing piece in my theater...
Вставка
- Опубліковано 15 лип 2024
- I review and give pretty much my full opinion on my new Anthem AVM 70 8K processor (sovrn.co/w5si050). Now that I have a full separates setup and I can give my full opinion on whether it's worth the cost/trouble. With this processor, I have almost enough channels of processing to implement my 17 channel home theater in my new theater build.
This is definitely one the best values in home theater processors on the market right now that process 15 channels or 9.2.6 home theater setups. If you're looking for a new processor for your home theater, this should be at the top of your list. This gives you very good performance and is relatively attainable for many enthusiasts.
RUIPRO HDMI Cables
amzn.to/3JbzOzo (Certified 50 feet/15 meter fiber optic) Used in video
amzn.to/3SOp7pr (10 feet/ 3 meter fiber optic)
amzn.to/3SSI3ng (16.5 feet/ 5 meter copper)
AC Infinity Fans
amzn.to/3T7tMSK
KabelDirekt - 6ft RCA/phono cable
amzn.to/3R5nDFt
Speaker Cables:
amzn.to/383ArHU
Subwoofer Cable:
amzn.to/3BbarXH
Center Speaker Wall Mount:
amzn.to/2XRPsdZ
Speaker Brackets:
amzn.to/3892RQA
/ upscaled_
Equipment list:
Speakers (Some models shown are updated equivalents)
1. Definitive Technology BP-8080ST Front/Main
amzn.to/3i2NG4g (Definitive Technology BP9080x)
2. Definitive Technology CS9080 (Replaced the CS8040HD) Center
amzn.to/3C9io2g (Definitive Technology CS-9060)
3. Definitive Technology SR-8080BP Surrounds
amzn.to/3WDUaWo (Definitive Technology SR9080)
4. Definitive Technology StudioMonitor 55 Height Front
amzn.to/3PYcfvD (Definitive Technology Demand Series D11)
5. Definitive Technology ProMonitor 1000 Rear Surrounds
amzn.to/3vpMB9v
6. Infinity CS60R In-ceiling height
7. SVS PB-3000 Subwoofers
amzn.to/3WNHqMm
Processor
Anthem AVM 70 8K
sovrn.co/w5si050 (Crutchfield)
Amplifiers
Emotiva XPA Gen3 7 Channel
Emotiva XPA Gen3 10 Channel
Screen
Elite Screens ER120WH1
amzn.to/3mwL4LT
Projector
Epson 5050UB
amzn.to/3Q2X1p7
Epson 4010
amzn.to/3YU82x3
Acoustic Panels
Acoustimac.com
Seats
Palliser Blade
Theater Seat Risers
SoundRight 7" Black Home Theater Riser Platform (4Seating Website)
bit.ly/3DwPSXr
AC Infinity Fans
amzn.to/3T7tMSK
AC Infinity Controller 1, Thermal Trigger (For Xbox Series Consoles)
amzn.to/3VtsmUm
Chapters:
00:00 Overview
1:46 Rear panel
3:04 Up close - Front panel
4:17 Up close - Rear panel
6:17 Remote control
6:45 The competition
10:45 What's in the box?
12:35 Installation
14:54 HDMI Test
16:58 Final thoughts - Наука та технологія
Great Pesntation My Son, From India
Enjoy the ride! Great find!
Thank you. It was just dumb luck I guess but I’m quite pleased.
Congratulations on your purchase. I look forward to hearing more about adjustments and fine tuning you make with ARC-g as you become more accustomed to what it does and how it sounds.
It is noteworthy that the outputs are hotter than popular brands, thus -0 is not the industry reference point of 85 db. You might use a SPL to find reference. Most people claim it is -17 to -15. Many listen comfortably at around -24 which still gives plenty of sonic power.
I’ve settled on -25ish and find it comfortable. I hope to be posting those videos in the coming weeks.
I just bought the AVM70 as well. Coming from the Marantz world, I was extremely impressed with the sound quality, even before running ARC, which brought it to an even better performance level. My general observations seem to mirror yours. I love its performance but my AV7702 mkII did do a better job with the menu and OSD. I had the same experience with both the bass and overall loudness. One other thing I had issues with was getting the unit to perform a firmware update. I finally got it done but it was anything but intuitive. The good news is Anthem could make this unit even better with future firmware updates. Great unit. Congrats!
I should have been more clear about the loudness. It’s like reference on my receiver would be 0db and in the anthem I’m getting the same volume at -10db. I just need to mentally recalibrate my expectations.
@@Upscaled_Reviews
Just purchased agree sound excellent but remote horrible in controlling volume, response very slow and erratic.@@Upscaled_Reviews
i just bought an AVM70 8k from crutchfield also. This thing sounds excellent out of the box. I have not ran ARC just yet as im waiting my rear speaker amp to come in.
Enjoy!
I think you hit the nail on the head with law of diminishing returns, the AVM 70 is probably providing 90% of the experience a Trinnov would but for 20% of the price.
I love my Anthem MRX 740 but really would like to have an independent second sub output. That plus mine being HDMI 2.0 has me looking hard at an AVM70 or MRX1140.
With this current sale I am really fighting the urge to get the AVM 70 8K for $3400 or just getting the HDMI 2.0 version for $2600.
How many speakers are in your setup?
I own both, so I'd say an Anthem Pre-pro gets you about 75% to a Trinnov. 3D rempapping, the software processing power, and optimization on the latter is next level, although not worth its retail asking price. You need to shop secondhand like Upscaled to make it worth it. Keep your eye out for AVM 70 8ks. I just scooped up an open box 8k like the OP did for $2560. The outlet units will reflect the current sale price, which ends Mar 31st
@@nonametofame where did you get a avm 70 8k for $2560
@@derekhoshaw3072 On Audio Advice, I was able to combine a coupon and a cashback/credit card rebate. The open box price was around $3k because of the recent sale. It seemed that Audio Advice and Crutchfield were the best places to find an open box during a sale.
@@nonametofame dang missed that
That's a top notch processor congrats. Oh by the way did you trade your zappiti for the zidoo in your rack.
imax enhanced killer machine
I upgraded from a Yamaha a2a receiver to the anthem avm70 and what a difference I agree you have to play around with the bass setting to get the best out of your subs the anthem I found doesn't set your subs up as well as the Yamaha but like you said you can turn the subs up with a laptop or computer.great video.
Thank you! Tuning the bass was pretty painless.
@@Upscaled_Reviews thank you yeah its easy as long as have a computer or laptop near by as the Yamaha a2a does it easier with the remote control on the tv screen but the anthem you can beat it for sound.
you will be happy with the anthem and if you game my ps5 works fine on it.
Just paid 2600 for mine delivered. Freakin pumped!
That's a bargain! Enjoy!
Hey! I also just upgraded from a Pioneer elite to a AVM 70. :)
Great minds!
congrats on your purchase ..
Thank you!
Nice. I am the proud owner of an AVM20, and it's time....This is on my short list.
Considering I paid $3k 20 years ago for the AVM20, and current inflation, even at retail this unit is a bargain!
It really packs a lot of value.
Great explanation.Thank you.I have Anthem avm 70 my amp monoprice monolitch 7x200w onkyo pa-MC5500 9 channal THX.My speakers klipsch r28f center rc64iii all surround rs62ii (4x)and rp250(x2) polk audio r80i(4x).My question i want by wire or by amp connection to use for my LCR speakers becouse they have 4 terminals each I have extra amp Denon avr x 6500h.Can i used as by amp or by wire better sound for my LCR does not affect Anthem avm70.Thank you for your time.
Looks like a great processor for the money. Is that Elite screen you showed a 165"? Does your projector have enough light output for that?
6050ub has 2600 lumens. I may have to run at high power but it should be ok. Using a 1.3 gain screen too. It's another reason I didn't want to go for an acoustically transparent screen with speakers behind it because they tend to have lower gain.
I’m having hard time updating the firmware via Ethernet I’m trying the Wi-Fi route but that not working is there a quick tip how to upgrade firmware
Congratulation for your new equipment , a good big plus if you instead decide for a processor that included AURO 3D , which is way more better than Dolby Atmos and you can upmixing with any movie feature Dolby Atmos / surround or Dts /X
Thank you. I've heard a lot of good things about Auro 3D. I definitely need to experience that.
Anthem has a sell on AVM 70 for $3399 until the end of March 😁
Great deal!
You might have the volume processing on. It might be Dolby volume. It makes things sound louder
I’ll try that. Thank you!
I haven’t made the plunge into a separate pre/pro yet, I’m using a receiver with all external amps, but I too am using def tech speakers (STL and cs9080). Have you been eyeing the new line that was just announced?
The new bipolar ones. They’re a slight upgrade. Extra driver in the rear and an upgraded tweeter. I think it has a built Dsp for the powered sub. I won’t be upgrading but I bet they sound good. Def tech is the sole company keeping up bipolar speakers from disappearing. I for one like the increased soundstage they provide.
@@Upscaled_Reviews Do you find your ARC-G speaker distance being inflated due to the bipolar feature set (30ft)?
@@robo3412 All the distances I have seen are reasonable and nothing out out of the ordinary.
@@Upscaled_Reviews Ok. From a sound perspective…things are great. I just wonder why my distances look wacky.
@@robo3412 did you re-run Arc and get the same results?
using RCA preout do you get white noise or static noise from LCR speakers?
Not that I can hear.
How are you able to duplicate channels? You said you were going to add more speakers then 15 in your room. How is this possible with a 15 channel processor?
You use a rca or Xlr cable splitter.
Did ARC kill your bass? I have the AVM 90 and after arc I have lost all my bass output. The vocals and surrounds are way better though.
I didn’t even try without arc but yeah it does kill bass.
There are a few things that contribute to this.. correct setup before running ARC can help prevent "losing bass", but need to know more about your setups to better advise.
Pioneer Receiver model is what?
No interest in selling?
Not at this time. Will probably use it my new office home theater.
@@Upscaled_ReviewsGood luck with the new theater build. Genesis Arc is wonderful tech as you stated but I had the same initial reaction to it as you. Coming from mid tier Denon and Yamaha receivers I was so accustomed to doing on the fly changes via remote and corresponding apps. Purchased a gently used AVM60 last summer and had to get used to using laptop to run Genesis. It's worth the time and adjustment to master. The information via Anthem website is a trove of information along with the product manual that was included with my purchase. There are some very good YTers as well who have covered the Anthem products and software as well. I personally enjoy @Techthusiasm.
It’s such a great unit but it’s missing auro 3d
Agreed. A lot of people attest that it’s the best upmixer.
Hi all, wondering if anyone is aware of a new or recently new processor or receiver that supports 3D video. Emotiva's recievers do not according to the literature and then an email response from them. It would seem 3D support is being phased out, I get it, but there are plenty of folks out there with a number of 3D titles. I have a Pioneer Elite whose manual says 3D ready but would not pass it from my 3D capable player to my capable projector. My HDMI cables are the correct version. Purchased an Onkyo TX-RZ820 and been enjoying 3D when I'm in the mood. But that receiver will not support a full on Atmos speaker config. So been looking for a possible upgrade. Looked at the Onkyo RZ50 but no indication in the manual that it supports 3D vid.
I’m going to make a video specifically about 3-D movies in the coming weeks. I might be able to address some things in there. My anthem avm70 8k plays back 3d no problem. I think Support for 3-D is embedded within the HDMI standard starting with version 1.4. My guess is that most modern receivers would support it.
I'll keep an eye out for your vid. I hope you're correct. I was surprised the Emotiva's wouldnt support it. Good to hear about the Anthem. Thanks.@@Upscaled_Reviews
big monster receiver
That Pioneer is really good!
@@Upscaled_Reviews yes but i talk about anthen
Who is the idiot that doesn't like an athem😅unless they went up to the 90avm😢
Beats me. Avm 70 rules!
Does it has Dirac?? No, HARD PASS ...
My goal is to get my system sounding as good as possible without room correction and then use arc or whatever your device has.
Anthems are very weak and of poor quality, the 7 series can reach 70 watts in 8 ohms, 7 channels in 5 channels, which means it drops to 35 or even 30 watts in 4 ohms, if a 4 ohm speaker is connected or 6 ohms, the minimum impedance of this speaker drops to 2.5 or 3 if it falls, then this is the best possibility, the sudden sound will turn on at high volume
This a pretty useless comment for this video as this is a preamp/processor, no amplification.
What 8k content are u accessing and do u have an 8k projector???
No 8k and faux k projector.