How to Make a WiFi Repeater using ESP8266 NodeMCU | WiFi Router Range Extender esp8266 esp32 | 2022
Вставка
- Опубліковано 20 сер 2024
- In today's video we look at how to extend the range of an existing WiFi network by repeating the signal. This extension will be done using an ESP8266 NodeMCU. This process also works for ESP8285 but not ESP32
DIY WiFi Extender | DIY WiFi Repeater | DIY WiFi Booster with ESP8266 | 2022
--------------------------------------------------
Part Links (Affiliate)
AliExpress
ESP8266 NodeMCU: s.click.aliexp...
Amazon
ESP8266 NodeMCU: amzn.to/3ry7BHr
ESP with Dedicated Antenna(might work better) :amzn.to/328SMQX
--------------------------------------------------
Espressif Flash Tool: www.espressif....
Github Firmware: github.com/mar...
A similar basic NAT wifi range extender or wifi repeater using ESP32 can be found at: • How to Make a WiFi Rep...
----------------------------------------
Channel Gear and Equipment's (Affiliate)
Amazon : www.amazon.com...
AliExpress
~~~~ Multimeters ~~~~
UT61E Plus Multimeter
s.click.aliexp...
UT204 Plus Clamp Multimeter
s.click.aliexp...
~~~~ Lab Bench Power Supply ~~~~
RD6018W 60V 18A Bench Power Supply
s.click.aliexp...
~~~~ Oscilloscope ~~~~
DSO FNIRSI PRO Oscilloscope
s.click.aliexp...
~~~~ Soldering and Welding Kit ~~~~
KSGER T12 STM32 V3.1S Electric OLED Soldering Station
s.click.aliexp...
DH30 Max Portable Battery Spot Welder Kit
s.click.aliexp...
~~~~ Testers ~~~~
USB Adjustable Discharge Load
s.click.aliexp...
RD UM34C USB Tester
s.click.aliexp...
USB Tester with Current Voltage Indicator
s.click.aliexp...
Qualcomm QC2.0 & 3.0 | 5V / 9V / 12V / 15V / 20V Trigger
s.click.aliexp...
~~~~ Others Tools ~~~~
Xiaomi Mijia Screw Driver Kit
OLD Version s.click.aliexp...
NEW Version s.click.aliexp...
NEW Electric Version s.click.aliexp...
Non-slip Metal Scalpel Knife Set with 40 Blades
s.click.aliexp...
----------------------------------------
Kindly support us on patreon here: / delali
Don't forget to LIKE, SHARE and SUBSCRIBE
Cheers!!!
Follow us @diydelali on Facebook, Twitter and Instagram
Channel Theme Song: Entire by Quincas Moreira
#esp8266 #nodemcu #arduino #wifi #repeater #delali #design #innovation #maker #diy #science #technology #stem #designthinking #electronics #electricity #hobbyist #enthusiast #stayhome #staysafe #wifirepeater #hack #espressif #microcontroller #embedded #embeddedsystems #howto iot esp and arduino projects nodemcu esp8266
I would love for you to demonstrate how this is done on the esp32. I am new to this stuff and a detailed how to would be awesome, as I cannot find a how to video anywhere. You have a very good way of explaining things that even a noob like myself, can understand. thank for the videos!
Thanks for the kind words, I currently dont have an ESP32 available. I would make a video as soon as i can get my hands on one.
I have published the video for the ESP32, kindly see it below. Thanks for the patience.
ua-cam.com/video/BP1Dz66faf4/v-deo.html
Thank you so much
your code is working well
as others only post incomplete video without any explanation
but you explained that how the device will work after the execution
You are most welcome.
I glad i could be of help. Thanks so much for feedback
what was the option Automesh in STA Setting 6:34
@@Delali
Just downloaded 8266 flash tool v3.9.3 Noted DoNotChgBin is selected by default, no option for Flash Size. Worked perfectly. Great clear no BS video. Thumbs up!
Thanks for the feedback.
I'm glad you found this helpful.
Please don't forget to subscribe. Cheers!!
Great video but a little dated. I tried for several hours trying many different methods with no avail.
I searched for a more recent video on UA-cam with a blue background. That video had a link to the V3.8.5 flash tool. We able to get it working in a few minutes!
@@hmata3 i have the same problem but i cannot find the V3.8.5 Can you send it to me please?
Mine worked
Perfect but the through put seems to be extremely slow less than 2mb down. I have 3GB fiber
Thanks Man , Love From Bangladesh.
After Many attempts i get it.
Love You
Glad to hear that.
Please don't forget to subscribe! Cheers!!
Yo thank you, I was trying to figure this out. I missed that you have to check the boxes in the flashing program
You're welcome fam.
Those check boxes are quiet easy to miss..hihi😊
Hello Delali,
great movie, you perfectly explain step by step for this kind of fresh guys like me. I followed your instruction, had a few issues in the meantime, I had to start 5-6 time from the beggining, but finally works!!!
On my ESP8266 ping is 8ms, download 4,6Mbps, upload 5,5Mbps.
One remarks - on your movie baud is 1152000 (time in movie 3:45), it doesn't work in my case and I had to set 115200.
Sorry you had to try a few times but am glad it worked finally. Thanks for the comment and kind words. Have a Merry Christmas and a Happy New Year.
Please don't forget to subscribe. cheers!!
Thank you very much. It works. Merry Christmas to everyone
Wow... I always wondered how to extend the signal. Thank You McBishop
you're welcome buddy
Thankyou is working for me perfect . Great project
Glad to hear. Thanks fam.
Please don't forget to subscribe. Cheers!!
Great explain with a simply method... Thanks a lot👌👌
So nice of you.
Thanks for the feedback.
Please don't forget to subscribe! Cheers!!
Good job! Worked Flawlessly! I need to read about that other board you showed... im intrigued!
Thanks for the kind words. Please do!
Please dont forget to subscribe. Cheers!!
is the netspeed worth it, how max is the mbs transfer ?
Great tutorial! Easy to follow, and worked!
Great to hear!
Thanks so much for the feedback.
Please dont forget to subscribe. Cheers!!
@@Delali i am not aware about this flash button at that time , so I upload the firmware not holding flash button , now when I connect to PC it couldn't show any com port , I checked device manager It show nothing in there , how to get node mcu to normal use kindly help me with this pls
Okay, thanks for the knowledge shared, kudos
My pleasure!
You are the best! Thanks for this video!
Glad it was helpful!
Thanks so much for the kind words. Cheers!!
Please dont forget to subscribe!
Good instructional video. Easy to follow. Thanks. Subscribed!
Awesome, thank you fam!
Thank you it worked for me so well
Awesome.
Thanks for the feedback. I'm glad it worked.
Please dont forget to subscribe. Cheers!!
Dope I'll try this someday 🔥
Please do!
thank you for giving us such a beautiful and informative video.
any suggestion for having better speed .... it's showing only less than 1mbps
Thanks for the kind words brother. For better speed you could probably get the version of the ESP board with dedicated antenna with IPEX connector.
Truely inpressive project😊😊
Thank you so much.
Please dont forget to subscribe. Cheers!!
@@Delali ✌️
WORK WELL USE %20 AS SPACE IF YOUR WIFI NAME HAVE SPACE CHARACTER
Thanks for sharing fam.
Much appreciated.
You save me
Thank you so SO much !!
part is Best !
Thank You!
Thank you too!
Please don't forget to subscribe. Cheers!!
Nice one.. learnt something new. very educative.
Am glad we could be of help.
Hello bro
First of all thank you for giving us such a beautiful and informative video.
I had some questions about ESP8266 NodeMCU v3. If I want to make a repeater with it. So my question is
1 / What will be the maximum range of NodeMCU repeater?
2 / What is the maximum data speed of NodeMCU WiFi?
3 / NodeMCU repeater maximum number of people can use together?
1. I haven't extensively tested that but while connected i could move into different rooms with a gap of about 10m.
2. I had 2.14Mbps download and 0.76Mbps upload speed on testing, i have seen some people who apparently have had up to 5Mbps Upload
3. I haven't tested the maximum number of people, i just had my fone and laptop connected
This was really great - I cant wait to try!
Awesome. Kindly let me know how it goes. I will be uploading the video for esp32 next week.
NOTE: Use "%20" if your main SSID name needs a space. Example "WIFI%20GUN" will result with "WIFI GUN".
Thanks for the insight Batang Batibot
Please if the wifi AP source doesn't have a password (open AP) what should we write in the password label?
Hey Delali,
First of all, thanks a lot for this informative video.
I wanted to know, "Does it work as a repeater mode or access point mode ?"
I mean, does it have its own DHCP server or IP assignment is handled by the main router?
My objective is to create Access point and manage devices connected to it from this access point only, not the main router. The main router should show this extender connected to it, not all the devices connected to this extender.
Thanks again
Your welcome buddy.
It works as repeater but its actually an access point to your actual Wi-Fi router. I believe it has its own DHCP independent of the routers'
Managing devices solely on the ESP may be tricky as the software/firmware isn't very flexible or have many options available.
Happy new year buddy.
Thanks a lot it worked for me
I’m so happy it worked.
Have a good one. Please don’t forget to subscribe. Cheers!!
Wow thank you for this video 🙂
My pleasure 😊
Happy new year fam.
Put %20 space Hex representation work very well to SSID names
Exactly.
Thanks fam.
Up and working, however the web page displays lots of garbage mixed in with the normal things that should show up. odd.
That shouldn't happen. Can you kindly flash it again! or restart your main router if possible.
For those who get errors please change the baud rate to 115200
Also press and hold the flash button on the esp before you click start. Hold the flash button till the flash is done
You just saved me... 🎉😊
@@niyazkhan1207 i am not aware about this flash button at that time , so I upload the firmware not holding flash button , now when I connect to PC it couldn't show any com port , I checked device manager It show nothing in there , how to get node mcu to normal use kindly help me with this pls
it works fine, and the mesh feature is great, unfortunately speed is drasticaly decreased, from 22mbps to 1.4mbps.
So no go for me, better to use a cheap commercial repeater.
Okay. Glad you tried it atleast.
Please let me know if you come across anything on how to improve this or a cooler approach.
Please dont forget to subscribe. Cheers!!
wow thanks sir i can move on again
Always welcome
Thanks for the tutorial really easy to follow i have an issue where my esp8266 does not show up on the flash tool can i solve this issue and how?
i can't get this to work becuz my antivirus keeps quarantining the flash tool, so i can't flash it. pls reply with a solution. btw this video is excellent
when I connect nodemcu to pc light blinks but not shown in device manager and I tried to install drivers still it is not showing in device manager
Which USB chip does your Node MCU have? CH340? OR CP21XX?
when repluging the node
its blink blink bliink and stop
but flashed without any errors
I hope it worked atleast. Were you able to connect and use it?
I did everything like you but even after connecting at last it shows no internet connection in my phone? can you help me?
Please make sure the router whose internet you're trying to share is stable or good, else it wont work well.
Fantastic, thank you! I would love to se a video on just using the esp8266. I assume it is the same bin files flashed.
You're welcome.
Everything is working but at the end, when it starts working as a repeater it is showing no internet connected?... please help me... it's not working properly...i have tried several times.
In my tests, i noticed the router whose network you're trying to repeat must have good interent. else the repeater doesnt work work
@Delali thank you for your response 😊
great tutorial man
Glad you liked it!
I appreciate your feedback.
Please dont forget to subscribe. Cheers!!
i did exact the way u mentioned but after flashing i the board did not flash blue light and the board did not turn on wifi
Cool man
Thanks fam.
great video, my network shows limited connectivity. don't know wy??
Perhaps your internet isn't very good from the router.
Happy new year fam.
how would i do this with a ESP8266 esp-01s borad
I believe the firmware is just available for ESP8266 12E and ESP32....
I dont think this would work on esp-01s but in order to flash you'd need an FTDI to interface with the esp-01 to be able to flash
If nodemcu does not show constant led light after flashing or MyAP does not show up...try DIO mode
Thanks for the insight Sayan. Cheers!!
Nice video. And it works on my ESP8266, however on ESP8285 it loads, but nothing happens. Strange.
The firmware is for the esp8266 I believe.
That will explain why it doesn't work with esp8285.
Hi friend, would you please advise how to deal with the SSID with space (for example "My Router"). I tried to changed space into %20 but it only turns space into a plus sign (+). Did you encounter this? Please help. thank you.
Hello fam,
Thanks for reaching out. If you Wifi name is xxxx yyy use xxxx%20yyy as your ssid while configuring your repeater. Please is this what you did?
Also If your wifi SSID is a whole paragraph then use %20 instead of spaces and same goes for when you want to name the NODEMCU WIFI with spaces.
Perfect. Thanks for the insight.
Merry Christmas and happy new year in advance. Cheers!!
@@Delali hey.. thanks for the tutorial… I am planning to buy an esp8266 for an iot microwave sensor based motion detector…. But after digging I have found that there are more things to do with an esp… I was thinking to order 2 to 3..
Do you have any recommendations… also I live in India so I can’t buy from internationally based shops
i have a esp12s, the myap network doesnt show up. Any idea why this is happening? I followed every step but when i click "start" the green bar doesnt appear and change from "downloading" to "Finish" in about five seconds. What could it be?
Perhaps the firmware is not written correctly to your esp. delete the flash tool and all files associated. flash your esp with the original esp firmware and then try the process in the video again. maybe something went wrong the first time
I was not able to flash with tool version 3.9.3. but 3.8.5 was ok.
Im glad it worked for you.
Happy new year fam. Cheers!!
Awesome, thanks for share
Glad it could be of help. Thanks for watching!
Please dont forget to subscribe. Merry Christmas. Cheers!
30 mbps to 2 mbps almost %90 speed loss. It seems not very suitable to use as a wifi extender, right?
It depends on the device you connect to the network or what your are doing.
I easily played clash of clans while connected to the repeater and I could also watch UA-cam videos even though I had to wait a little for loading.
thank you
You're welcome.
Please dont forget to subscribe. Cheers!!
What if i write same name to both STA and AP Settings. Please reply 😅
It will work I guess. If your wifi name is the same😂
hi thumbs up for the video mate u didn't tell that we need to switch the chip to the programming mode ?? first??? coz u directly started flashing it please explain what are those small buttons on the chip??
Thanks for the kind words brother. In some cases, flashing without switching to programmable/flash mode works, as seen in mine. But in most cases it wouldn't. That's what I forgot to mention.
The buttons on the chip are FLASH and RESET. Flash puts the chip in programable mode and Reset reboots the chip.
Please dont forget to subscribe. Cheers!!
HI;Thanks for this tutorial.I'm trying to connect a nodmecu tasmotized from my IOT network to extender on a esp8266 and it didn't connect .Any idea about what is the problem? Rgds
Thanks for the kind words...
Not sure what the problem could be but try first connecting perhaps your phone or computer to the repeater to be sure it works first before trying your IoT devices.
Please dont forget to subscribe. Cheers!!
Is it possible to program from phone i don't have laptop or desktop?
Yes
I believe it could be possible. However i havent tried it myself.
hi sir , i have done for the flashtool . but wifi myAp doesn’t appear . can you help me ?
Kindly unplug the ESP and plug it back. You need to do that after flashing.
Delali hi. First of all, thank you for this beautiful video. But i had a problem when the flash finish i cant saw MY app at my wifi settings. Can you help me?
Thanks for reaching out.
Did you unplug the esp and plug it back?
Also sometimes you need to refresh your WIFI settings by turning it off and back on again to see new WIFI's.
bor flash tool not opening. open and and close within 4-5sec. help me.
Sorry about the challenges...I'm not sure why the flash tool keeps closing but can you delete the whole folder of the flash tool, download a new one and run again?
Perhaps some files are corrupted.
Can I use my esp8266 nodemcu for other projects after flashing it with the wifi repeater firmware?
Yes you can reuse it for other projects.
Hi delali, Thank You very much for this nicely detailed video. Is there such a device like the ESP8266 with support for 802.11ac/ 5.8gz ? Am wanting to setup as a repeater on top of drone which requires 5.8ghz wifi for FPV. Thanks again.
I haven't come across a devboard that can be used in 5 GHz band range but i will surely update you if i do.
I got out
1.5 / 1.6 upload/download.
so 15mbit?? cant see it happening
You can get one of those esp's with dedicated antenna's. That might improve things a bit.
I follow your all step. then i configure my nodemcu repeater. but problem is i see repeater is no internet connection. please help to solve my problem.
If the internet content of the WiFi you are trying to repeat isn't very good, the repeater would appear to have no internet access.
After device connected, it says no internet access?
In my experience this happens when the internet you're trying to extend is not that good/stable to begin with.
Delali hi. First of all, thank you for this beautiful video. No matter what I did, the name wifi did not come out, but thanks to you I succeeded. But as you showed I couldn't manage the internet connection. I want to do it again, but automantic connects to the wifi name that I did before and failed. How can I repeat the next steps after seeing the name of nodemcu on wireless networks?
Thanks for the kind words Neslihan Yangin. Kind re-flash your esp with the binary files again so it completely reset. Then connect to the wifi name and visit 192.168.4.1 to configure. Am available if you need any help
Hi!.
I have a problem; i did all the steps correctly, but, i dont have internet connection, i dont know why.
I tried flash my esp but it doesnt work, i still having the same problem, no conection.
Can you help me?
Pleaes does your target router have a stable internet connection?
How can you download the flash tool if you have a Mac? Great vid though!
I need help to make a dongle with esp8266, if you know a suitable site or can guide me, I need help!
Hello again, is there a cheap diy board like this that can plug into Ethernet cable ? many thanks
do you mean a board you can connect to a router via ethernet to serve as a repeater?
@@Delali Yes correct....
can you tell how to do this in kali
Unfortunately not. I think the flash tool is for windows.
It works perfectly fine. I am able to connect my laptop using this repeater, but the problem is I am not able to connect to Android phone. It says "check password and try again". I have entered same SSID and password in laptop where i am able to connect. But in Andoid phone is not able to conect. I tried even only one device (Andoid phone alone) still the problem persist. Can anyone help me.
Thanks for reaching out. I connected using an iPhone as I dont have an Android at the moment. It works fine on the iPhone.
I would try and get my hands on an Android and let you know if I encounter the same issue and how I solved it.
When i try to connect with main router the esp wifi disappares and doesn't work
Does your router have a space in the name? for example "Delali Router"
love u soooooooooo much brooo
Love you too brother.
Please dont forget to subscribe. Cheers!
is it possible to do it without flashing the firmware?
Hi thank you very much for this great tutorial. I have follow all the steps, but when i unplug and plug it again to laptop, the light on the ESP8266 was turned off and i cant find the myAP ...
Please help me....
Thanks for the kind words.
Not sure why the AP doesn't show but could you perhaps flash again? Maybe the first flash didn't go so well
Also make sure to press and hold down the flash button on the esp before you click START in the flashing software. Don't release the flash button till after the flash is complete/finished
also let me know if the second flash still doesn't work
@@Delali thank you so much for replying me, but it still not working. it only blink once when i unplug and plug it back to laptop while ypurs had solid light. i have flashed it many times and hold the flash button. i hope we can figure out the problem
Sorry about the difficulties. Do you happen to have a spare ESP? if yes try using that.
I noticed my one of my brand new esp's couldn't connect to my WIFI last week. After switching to a another one, it worked. so "perhaps" its a defect.
Kindly let me know how it goes. Cheers!!
@@mohamadsamsarizal443 probable because you forget to put a check mark on the box in front of those files
hello bro, my main router name has space in it so how should i write it in ssid??
If your router name is for example "Delali Ghana" write is as "Delali%20Ghana" in your ESP configuration interface. So add %20 in place of the space.
Please dont forget to subscribe. Cheers!!
@@Delali not working dude
@@richardochayadi2997 😂
That's why we need the ino file, bin file can't be modified
i cant set the password and ssid. it already connected to our internet but i cant change ap settings
Kindly try restarting it and visiting the IP address 192.168.4.1 for its dashboard to change the settings.
If that doesn't work, kindly consider reflashing the repeater firmware and trying again.
Bei Lock Config kann man nur den Lock Device Setzen und nix weiter von wegen AP Passwort setzen. Das Passwort ist so Geheim das es jedesmal Flash heißt. um in das Menu zu gelangen.
You only need to enter the AP password once. you should be able to connect to it each time without having to enter it again.
Hey! When i open the flasher tool and select the esp 8266 its saying missing IDLE_S.bmp?????why?
try deleting the flash tool and its entire folder. Download a fresh copy from the espressif website here www.espressif.com/en/support/download/other-tools
will all of the devices connected to the nodemcu be in the same lan as the main wifi router ?
Yes fam.
So any resource on this network can be accessed by all connected devices in the network.
Thank you for your tutorial, I want to ask if a nodemcu is already a repeater, can it still be programmed via the Arduino IDE as an IoT controller?
Thanks for the feedback.
Yes it can.
You just need to flash your Arduino code to it just as always and that's it.
I need help, why the com doesn't show up its just blank?
Thanks for getting in touch. If you can't see your port its usually because the UART chip on your ESP board driver is not installed.
Go to the link below, download the CP210X and CH341 drivers and install them. Am not sure which one of the two chips your ESP got but one of them will work for you.
drive.google.com/drive/folders/1M9UKCm1I6qsNywlQFlggDPvXdKDEhLjm?usp=sharing
Please dont forget to subscribe. Cheers!!
My flasher is stuck at sync and is not downloading 🥲😭😭
Please help
hello its working but not giving good speed what should i do?
Kindly make sure your repeater is not too far outside the range of the original.
Also if the internet of the original router isn't good, the repeater will be much worst or the same.
You can also try getting one of those esp's with dedicated antenna. that should work better.
Hi Delali, my laptop didn't detect any COM port at all... how?
Thanks for reaching out. If you can't see your port, its usually because the UART chip on your ESP board driver is not installed.
Go to the link below, download the CP210X and CH341 drivers and install them. Am not sure which one of the two chips your ESP got but one of them will work for you.
drive.google.com/drive/folders/1M9UKCm1I6qsNywlQFlggDPvXdKDEhLjm?usp=sharing
Please don't forget to subscribe. Cheers!!
I dont's see the COM number ...
Thanks for getting in touch. If you can't see your COM port its usually because the UART chip on your ESP board driver is not installed.
Go to the link below, download the CP210X and CH341 drivers and install them. Am not sure which one of the two chips your ESP got but one of them will work for you.
drive.google.com/drive/folders/1M9UKCm1I6qsNywlQFlggDPvXdKDEhLjm?usp=sharing
Please dont forget to subscribe. Cheers!!
esp 32 or esp 8266 which has more speed to browse or buffer videos for home usage ?
The ESP32 is much better i believe.
@@Delali And how much metre is the range for esp32?
Cannot unlock with default STA password, what is it?
there's no password on the AP by default. You create the password when you setup for the first time. If you forgot your password just re-flash the firmware again and that should reset everything.
how to match client?
I tried only 2 devices on the network. Not sure exactly how many devices it can support practically.
Man but what if I have to undo this? Can I flash any program over it to get it back like normal? Pls reply
Yes you can flash with chip with an empty Arduino sketch.
Node mcu Repeater range metre ?
< 10 meters indoors. even less if there are more walls
if i do some adjustments on the files,how can i built it ?
I'm not sure how you'd make the adjustments on the files, seeing that they are binary files. However if you do, I'm quite convinced you should be able to rebuild.
Kindly let me know how that goes if you try it out.
Please dont forget to subscribe for more. Cheers!!
is it worth it? from 32mbps to 2 mbps.. it drops significaly,, yes it ca extend but if you have reach for example 3 users using the extender it will suffer
It depends on what you use the repeater for and how many people are connected to it I guess. But I agree 32mbps to 2mbps is too much. However its okay for connecting DIY IoT projects
Will this work if the network I want to connect to is an open network? ( ie, I need to sign in with my credentials in the login page after connection to the open network)
If its an open network that doesnt require any further steps to enable internet connection, then i believe it should work
Please can you recommend any shop where I can get the ESP8266 to buy? I'm also in Ghana.
inventelectronics.com or geekelectronics.io but its out of stock last time i checked. You can check again.
Hi, i followed everything, it works but the signal is week. with same distance from my router i got 60mbps for my internet but only get 3mbps using node mcu
Yh it appears to have a weak signal and mbps on the esp is also very low but when you actually connect to the esp and stream or do something on the internet its quite decent - as i demonstrated toward the end of this video. Also the esp is a small under 5 USD board so its not as great as a professional or customer grade repeater.
I have tried other programs with the same esp. Worked quite well, when placed away from the router too. Please let me know if any improvement in code can help.
Impressive features is to have a web interface and option to customise the user credentials. Awesome.
Liked your total presentation and idea
connect to wifi but no internet acces, what is the problem
?
Perhaps the network you're trying to repeat doesn't have good internet connection.
Can you attach WiFi Repeater to the WiFi Repeater?
Interesting question. Unfortunately i haven't tried that but i guess its possible.
when i do this i try to conect the esp8266 to the computer but the com port doesnt appear what i can do?
Kindly double check your USB connections and also try resetting your ESP. Let me know how it goes.
Thanks for getting in touch. If you can't see your port its usually because the UART chip on your ESP board driver is not installed.
Go to the link below, download the CP210X and CH341 drivers and install them. Am not sure which one of the two chips your ESP got but one of them will work for you.
drive.google.com/drive/folders/1M9UKCm1I6qsNywlQFlggDPvXdKDEhLjm?usp=sharing
Please dont forget to subscribe. Cheers!!