Default battery is Panasonic CR2450 made in Indonesia, I replaced mine with Renata CR2450N swiss made and it's working perfectly. they have the same thickness.
Don't put too much grease like this, just put small amount of silicone grease on your hand then rub it on all the surface of the rubber. The purpose of the grease is not to seal the cover, it's the O-ring's job. You only need to put a little grease so that when you close the cover which is very tight, the O-ring will stay on its position and not get misaligned. Cover is too tight, like not even hair line of allowance. When you close it you actually compress the air that is trapped in the watch.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Default battery is Panasonic CR2450 made in Indonesia, I replaced mine with Renata CR2450N swiss made and it's working perfectly. they have the same thickness.
Don't put too much grease like this, just put small amount of silicone grease on your hand then rub it on all the surface of the rubber. The purpose of the grease is not to seal the cover, it's the O-ring's job. You only need to put a little grease so that when you close the cover which is very tight, the O-ring will stay on its position and not get misaligned. Cover is too tight, like not even hair line of allowance. When you close it you actually compress the air that is trapped in the watch.
Size of the screw driver must be T5 Torx type.
What is size of Torx scredriver, I wonder? T5
what is scrdriver trox ?
hi there ... what size of battery is it? some CR2450 batteries are bigger/smaller then others...or both size are ok with d4f??
Just CR2450 battery type.
@@OLYALA11 , on dive mode it shows depth as 0.1m instead of 0.0 after replaced battery? İs this normal? İs it gonna be normal after some time
it has been get to normal just after a day later :)
Very good job!!!! Thank you
sure thing!! :-)