Purchase using the following link - shrsl.com/4bb0p Use the following code to get an additional $10 off - ELEGOO3D Purchase Fixdry Multi Color Filament Using the following link: bit.ly/474GYyR 10% off using the following code: Chirs6
Im so excited to get mine! Comes tomorrow! This is plenty big enough for all my huge mini tornado siren projects. My sister has a neptune 3 max and that got me sold on upgrading from my sunlu s9 plus to the neptune 4 max. This is my 3rd printer. My first two were a sunlu s8, and sunlu s9 plus
Were you able to connect to wifi yet? I purchased one for my son and set everything up for him. I could possibly help if needed. In a side note, I definitely recommend Orca slicer for all your printers. We have a P1P and the N4Max and run both from Orca.
Great video thank you. My experience with it is much the same as yours. Those annoying plastic blocks messed the set up a bit. They should be mentioned in the instructions ie. Remove them before doing anything. Then I found I could not connect via WiFi using the Elegoo Cura slicer. The browser on my PC can see the printer though. I have printed out the nutcracker model which was OK but did have a layer shift. My firmware is well out of date which is a concern. I could update it but worry I will have to update the touch screen TF card as well. Thanks again.
Yea. I am still unable to connect to the printer through wifi as well. I can see and control it through the browser - same as you. Hopefully a fix will come soon. I updated to the latest firmware for both the screen and printer. It fixes the grinding print head, but still having issues connecting via wifi. The update wasn't too bad, but I have heard mixed stories.
I am now dealing with Elegoo support. They have sent some instructions where you activate the Octoprint plugin from within Elegoo Cura. However, you need to input an API key which I don’t have. So I am asking Support where do I get this key from.
OK, I have got Wi-Fi working now. Open a browser and input the address of the printers WLAN. This takes you to the “fluidd” firmware screen. Click on the cogwheel down the left hand side and from the drop-down click on “authentification”. This takes you to the “Octoprint” firmware and there is a button marked API Key. Click on that and copy the key code. Then through Elegoo Cura click on the “Manage Printers” option on the printer drop down. Then select the “connect octoprint” option. Enter the IP of the printer and press OK. The next screen requires you to paste the API Key into the correct field. Then click “connect” and then “close”. Then “slice” a file. The box in the bottom right hand corner now has a button marked “print with Octoprint”. I hope this helps.
@@leswaters2275 Thank You sir. You are a lifesaver! Now I just gotta figure out what the issue is with bed leveling. The back of the bed never prints right on the first layer and i cant figure out if its too much squish or not enough.
@@Ferineas yep, but all the problems mentioned in that video have been fixed with firmware updates. According to that content creator, Elegoo has also been very responsive and committed to fixing the issues. I ran into one of the same issues that I mentioned in my video and they fixed it with a firmware update :)
Hi, I have a Neptune 4 and most of the time it doesnt connect to my network. Ethernet cable is fine, other devices like Laptops etc connect normally. Sometimes it does connect and everything is fine, but I cant find the reason why it struggles so often. Do you have an idea ?
I have not yet been able to get mine to connect over wifi using any slicer. I can only access the printer via wifi using my browser. I think this is a known issue that several of us are facing and hope an upcoming firmware update will fix it. Let me know if you find a solution as well. I have been hearing mixed results from users on the forums and viewers from my channel. SOme are able to connect through wifi using Orca Slicer.
@@3uilDStudio Hi, thanks for your answer. My printer gets no IP even Overkill ethernet, in rare cases it does get one, but I cant fix it. If I find a solution, I'll let you know.
It is not a good printer for printing something large and functional... it requires so much tinkering to get things more or less right. Too big and that increases tolerances level by a lot.
Thanks for the video. I was able to connect to my printer over wifi. It wouldn't print directly from Cura, but I could go to the IP address via Chrome and upload and print the file that way. I prefer this method as the usb failed me twice on big prints. I found this video that shows how to go about getting it set up. Hope it helps! ua-cam.com/video/KpEkrja5XBg/v-deo.htmlsi=0FU2e9LMrnOgl2CU
Purchase using the following link - shrsl.com/4bb0p
Use the following code to get an additional $10 off - ELEGOO3D
Purchase Fixdry Multi Color Filament Using the following link: bit.ly/474GYyR
10% off using the following code: Chirs6
Im so excited to get mine! Comes tomorrow!
This is plenty big enough for all my huge mini tornado siren projects.
My sister has a neptune 3 max and that got me sold on upgrading from my sunlu s9 plus to the neptune 4 max. This is my 3rd printer. My first two were a sunlu s8, and sunlu s9 plus
Great video! I'm considering buying this printer because of its speed and size. How quickly did it print that robot?
I boght it a week ago and am very hapy with it
works well with orca slicer
Just bought this printer and using Orca Slicer have had 0 issues with the printer, getting amazing prints. Wifi works flawlessly as well
That's good to hear. How did you get the wifi to work on Orca Slicer. Im having trouble detecting the printer on WiFi
Everybody has this video 9 months ago. How about a follow up video?
love the printer but waiting 2-3 weeks for a replacement hotend is tough
I can definitely see myself putting this to very good use!
You should! Especially if you like to tinker and need a printer for larger prints
Do you happen to have the footprint dimension of the 4 feet? Thanks
Were you able to connect to wifi yet? I purchased one for my son and set everything up for him. I could possibly help if needed. In a side note, I definitely recommend Orca slicer for all your printers. We have a P1P and the N4Max and run both from Orca.
I have not yet been able to connect. Im having the same issue in Orca Slicer. Recommendations would be great!
Help!! i just ordered and am in the us. What do i do to fix my power issue?
I would like to know where to download the "NEPTUNE 4 PLUS" profile for CURA 5.6 or ORCA SLICER?
I was able to get OrcaSlicer to connect to the Neptune 4 Max wirelessly. I could not get Cura to even see the printer.
Same here. I have not been able to get Cura to find the printer over wifi. I can see it using my browser though if I type the IP.
Great video thank you. My experience with it is much the same as yours. Those annoying plastic blocks messed the set up a bit. They should be mentioned in the instructions ie. Remove them before doing anything. Then I found I could not connect via WiFi using the Elegoo Cura slicer. The browser on my PC can see the printer though. I have printed out the nutcracker model which was OK but did have a layer shift. My firmware is well out of date which is a concern. I could update it but worry I will have to update the touch screen TF card as well. Thanks again.
Yea. I am still unable to connect to the printer through wifi as well. I can see and control it through the browser - same as you. Hopefully a fix will come soon. I updated to the latest firmware for both the screen and printer. It fixes the grinding print head, but still having issues connecting via wifi. The update wasn't too bad, but I have heard mixed stories.
I am now dealing with Elegoo support. They have sent some instructions where you activate the Octoprint plugin from within Elegoo Cura. However, you need to input an API key which I don’t have. So I am asking Support where do I get this key from.
OK, I have got Wi-Fi working now. Open a browser and input the address of the printers WLAN. This takes you to the “fluidd” firmware screen. Click on the cogwheel down the left hand side and from the drop-down click on “authentification”. This takes you to the “Octoprint” firmware and there is a button marked API Key. Click on that and copy the key code. Then through Elegoo Cura click on the “Manage Printers” option on the printer drop down. Then select the “connect octoprint” option. Enter the IP of the printer and press OK. The next screen requires you to paste the API Key into the correct field. Then click “connect” and then “close”. Then “slice” a file. The box in the bottom right hand corner now has a button marked “print with Octoprint”. I hope this helps.
@@leswaters2275 Thank You sir. You are a lifesaver! Now I just gotta figure out what the issue is with bed leveling. The back of the bed never prints right on the first layer and i cant figure out if its too much squish or not enough.
Great Vid... Did you have any firmware issues? All of the printing was right out of box... no updates?
All of the prints were out of box - During the filming of the video I had not yet updated any of the firmware.
On YT is video "Neptune 4 Series Problems" ;-)
@@Ferineas yep, but all the problems mentioned in that video have been fixed with firmware updates. According to that content creator, Elegoo has also been very responsive and committed to fixing the issues. I ran into one of the same issues that I mentioned in my video and they fixed it with a firmware update :)
Layer shifts are resolved with a firmware update.
I blew my power supply on my Neptune 4 Pro , ordered new power supply , still waiting for it , hopefully it will fix the problem..
Ouch. Sorry to hear that. Was it because of the voltage switch?
@@3uilDStudio yes my fault
@@3uilDStudio got new power supply , printer running great , also bought this printer the max :)
Hi, I have a Neptune 4 and most of the time it doesnt connect to my network. Ethernet cable is fine, other devices like Laptops etc connect normally. Sometimes it does connect and everything is fine, but I cant find the reason why it struggles so often. Do you have an idea ?
I have not yet been able to get mine to connect over wifi using any slicer. I can only access the printer via wifi using my browser. I think this is a known issue that several of us are facing and hope an upcoming firmware update will fix it. Let me know if you find a solution as well. I have been hearing mixed results from users on the forums and viewers from my channel. SOme are able to connect through wifi using Orca Slicer.
@@3uilDStudio Hi, thanks for your answer. My printer gets no IP even Overkill ethernet, in rare cases it does get one, but I cant fix it. If I find a solution, I'll let you know.
I just updated to the latest Firmware and it works again :D
Can you Share your Slicer Profile please?
I used the default Elegoo Cura profile that came with the printer/software on the USB key
Build music kills the video
Stop advertising this printer as "500" mm/s.
Everything above 300 looks like absolute crap.
It is not a good printer for printing something large and functional... it requires so much tinkering to get things more or less right. Too big and that increases tolerances level by a lot.
True. It's definitely a tinkerers printer. I assume it will get better over time with more updates.
Tinkerers model? How so? Seems only to be some firmware issues. If you want to tinker just head over to Creality 😂
@@henriklagercrantz apparently it’s very build quality related and I finally pinpointed exactly what’s wrong. But it took so long!
@@boulderdash555 and what was it?
@@henriklagercrantz will leave you to tinker with that. If you want an answer right away it will cost you $500
Thanks for the video. I was able to connect to my printer over wifi. It wouldn't print directly from Cura, but I could go to the IP address via Chrome and upload and print the file that way. I prefer this method as the usb failed me twice on big prints. I found this video that shows how to go about getting it set up. Hope it helps! ua-cam.com/video/KpEkrja5XBg/v-deo.htmlsi=0FU2e9LMrnOgl2CU