Go Kart Build / Crosskart Mode Change and Lap Times
Вставка
- Опубліковано 5 лют 2025
- Check description for more details.
Adding to the VF (variable frame) idea is a new mode named "Tonka Kart Mode". 31 inch Agricultural tires and 19 inches of ground clearance for some heavy hitting fun. The budget built Predator 459 powered crosskart is turning out to be an awesome test bed for the crazy ideas to come. If an affordable 18 hp engine can do all of this then imagine it applied on the other more spirited VF's. A huge thank you to Cars and Cameras, Jumper Cable Dadz and Rattle Can Customs; what we accomplished together will make us life long friends.
-Kyle
Plans Available Here:
kj-raycing.dpd...
@jumpercabledadz
@RattleCanCustoms
@CarsandCameras
100+hp Build Series Here:
• 100+HP Crosskart Build...
Easy Affordable No Lathe Chain Driven Spool Here: • Making an IRS Center s...
Budget Build Series Here:
• Inexpensive Crosskart ...
2 Seat Crosskart Build Series Here:
• Two Seat Crosskart Bui...
Plans detail and Materials needed
• Crosskart Plans: KJ Ra...
Custom length chassis
• Inexpensive Crosskart ...
Preferred tubing bender and notcher
www.Roguefab.com
Facebook KJ Raycing
Once you have the plans come join the build discussion
Facebook Build Group (KJ Raycing VF-1 and VF-2 Kart Builders) / 905565813954510
Instagram @kjraycing
Storefront kj-raycing.dpdcart.com
DISCLAIMER
Videos are for entertainment only, work performed in the video should only be accomplished by a professional technician. KJ Raycing will not be held liable for ANY personal injuries.
Awesome vidya! And it was a great time hanging out with all of yall!
Dude that was on of the best weeks of my life. Can’t wait to see you again man!
@@KJRaycing same man it’s always a blast! #thatsnothowiwouldhavedoneit
Wouldn't trade that week for anything
Gift me one
That goofy little Harbor Freight motor is awesome.
Love to see the crossover with C&C guys
The permanent grin is priceless.
Hahaha that's awesome! I want to see the 100hp unit run those big tires!!
Solid collaboration video, that thing rips
Not too bad for a harbor freight motor!!!
It's a truggy, when you put monster truck tires on your RC buggy!!! I love it!!!
Awesome!!! Little engine gets the job done but man 100 h.p. sounds so good!!!!
The big tires are baller!
Esses Kat Cross são tops demais parabéns pra vocês belo trabalho
Absolutely love it when you put out new videos. In fact I prioritize your videos over any video in my list of subscriptions. However, I've been dying to see your 2 seater in action and it's been over a year!!!! Do you have any time line or guess as to when that beautiful piece of equipment will be up and running?!?
Man that is so cool! Thank you so much! I’ve been dying to do the two seater as well, but between deployments, events and opportunities like this it’s hard to get solid garage time in. I’m hoping to have it ready for April Mini Mayhem.
Awesome Christmas gift! Thank you very much fellas! I like the big tire version best. Merry Christmas
I would love to see the c&c guys do a build series for the vf1 or vf2
Totally agree I love those guys.
Yeah me too… 😉
@@KJRaycing Needs the V-Twin dragster engine installed with the big wheels it needs manually adjustable electric power steering with a shock absorber....
@@KJRaycing 4x4 version ?
The guy in the orange goggles might be the coolest looking guy to ever drive a VF1! 😂
KJ, cool Kart man! Hey, I still have my plans, but I have not started. Thank you for keeping me motivated!
Heck yeah!! Can’t wait to see your build 🦾
That great! I’ve been watching your videos and you really do an amazing job on your carts. That looks like a beautiful area! I’d love to rip around a spot like that!
Thank you so much!
Awesome crossover episode!!
100hp would definitely be more fun for sure
Check the channel baby!
My buddy has a revolt with a 600cc CBR engine on it. Get some power for those big wheels!
This is at the cars and camera's facility. that was on the grand Prix lap.
now we need to see them get Grind Hard Plumbing. and Criss from Rather Be welding. there to see some of these vehicles stack up.
since there are so many of those three wheeled ATVs just laying around. I would like see someone use those tires and wheels on a kart. because they would be just the right size, in between the one's on this kart. and the smaller one's that are normally used. I think they would be the perfect size. they might be worth a try.
Uhhh!!! Getsome! Getsome! Hey, baby!!
Vou fazer um também em breve
Looks great.
Its impossible to buy a Crosskart so this is the very best place to build your own. It's all frist class stuff.
Thank you so much 👍
I’m still amazed to see those a arms I gave you off raptor irs street quad are still working for you on the street bike vf-1
Garth man how ya been!! They work like a charm, they just need maintenance from time to time like anything else. Are you working on any new and exciting projects?
@@KJRaycing I’ve been good just been putting a 93 gsxr 750 engine in a raptor 660 getting it done for ice racing this year
Ripping w/ the Cars and Cameras crew... Well, minus Charles but I'm sure he's already well acquainted w/ one of these, 😂
I would Love to see the Grind Hard Plumbing guys build a few of these as well.
I would love to see their twist on a VF-1!
This was so damn cool! Merry Christmas!!
That little red Daihatsu (or whatever) truck needs to be turned into a mini-Unimog thing.
Super cool! I've been working my way through each of your videos. Do you have a video that covers the tube bender? That's the only tool that I'm missing.
Thank you so much!! Check out the budget build series, it covers everything the best!
Awsome cart but you better keep your thumbs out of the steering wheel with those big tires as an off roader and machine operator tips of the trade❤
Very cool!
That is neat.
I thought the driver and track looked different ;-)
Wait what? i thought i was stroking out again when i seen CnC
class just class 👊
Thanks man!
mantap bang
I want one!
Love this! What tires and wheels are the big ones? I need something like the back of my death trap
Damn looks mean.💪🇺🇸👍
10:14 you should’ve let Ike drive the hundred horsepower cart. He’s a much better driver he’s got bigger cojones.😂 those cross cart chassis are pretty awesome. I wish I could afford one.
Honestly in my opinion, for daily use most people wouldn't need more than a 600cc cross kart, with climate control and a grocery rack for some people of course. I would for sure be perfectly happy ripping around daily with a smile on my face.
Great build but you guys definitely need a bigger motor on that big wheel cart . You have a lawn mower motor in it. 😅
Driving it would change your mind, it did so for a lot of people at Mini Mayhem in October
Video coming soon with 100hp put to the big tires.The “lawnmower motor” kart is an awesome test bed for new ideas.
did you film this at the cars and cameras compound?
Yessir!
Seen cheap ducati engines v twin in that would ve sick
I think we would all love to see you build it 👍
nice
How much did the whole build cost?
I want to know the 100hp time!
How much feet of metal did use in total?
It’s in the plans 👍
@@KJRaycing well I’m thinking about getting the plans, but I also have a different kart in mind and was mostly just looking for the bare minimum of metal need. Think you can just tell me?
@@reda-420 That's not how it works, unfortunately
Just a heads up. I have Polaris outlaw IRS REAR AXLE ASSEMBLY HUB TO HUB W/ BRAKES NEW BRGS BOOTS. I ALSO HAVE FRONT ARMS HUBS AND BRAKES . LET ME KNOW IF I CAN HELP. THANKS
Where are you located? That would be helpful
What to see if I get the vr1 plans is there a way to use those plans if I wanted to build the vf2 in the future? Or is it just better to buy both sets of plans?
They're pretty much completely different karts.
Oh ok didn't realize that. I watched a little bit of the vr2 build but I guess I should have watched it closer.
The VF-2 is an entirely different design. I was trying to figure out a comprehensive way to make the VF-1 able to be converted to a two seater but it just wasn’t possible.
Man that motor sounds like she's struggling to get them big ass tires rolling
Got em rolling though… those small engines have more torque than horsepower.
Do you think you could gear it to better handle those big tires?
What was the time for the blue car?
We never did an official timed lap unfortunately. It was a busy week as you will see by C and C’s video.
Hello sir, I bought your plan, but I don't understand the dimensions and bending angles, please help me.
Tell me how to convert the measurements to millimeters or centimeters, I don't use inches
Here is the bending video
Budget Crosskart Build#2: Bending
ua-cam.com/video/-ufGaFIhhQE/v-deo.html
And you’ll have to use online converters or siri if you want to use mm’s. Lots of guys have done it, you can do it too 👍
What are the big tires size and brand.
They are Agricultural tires. I’ll update the components list with the details soon 👍
Anyone know what size big tires thay was
They are 31” agricultural tires 😁
Homemade crosscart ish or part of an old Honda Pilot or Odyssey with four wheeler shocks you can cook an egg on. CV"s are screaming. Even if ya put the highest temp grease had to be liquified. Then she went to the Biggest loser and got some skinnier legs and everyone was so happy. But no one as much as Honda Pilot? Odyssey Uncle leo's was she was a new woman. My point is dont take drugs. Lil tidbit my brother got run over by an Odyssey in like 85. My cousin was driving. Had some newer knobbies on the back. I swear he had the tire mark left bruises on his chest for 6 weeks. Wind knocked out of him bruised ribs a 6 year old ego. Otherwise, all good. Looking back though, I think I may have missed out on an opportunity to permanently become the favorite boy in the family. Here i was thinking my whole life like " what goes through your head to lay down in front of a vehicle when it's running, what a dippy!" I am the dippy> Darn. Didn't help the public either. Sadly. Pretty sure and last time I checked he is in and out of some like totally cool correctional facilities in the Bay and Northern California. All this weed and ya chose the meth. Way to be complicated. See my point dont drugs. Also Clay oval winged go carts are the best. Feel like Steve Kinser in the 90's in a open cart. Have fun. #CVLIVES #IMSOHOTITURNGREASETOOIL
Electric power steering time!
It’s not too bad as is. These are budget builds and eps starts at like $700. The gym is free 😁
About five years ago I did eps under $200 . There's a guy on ebay that make a controller for a Saturn Vue / Equinox eps unit. If you pull on at the Junk yard you can get everything you need. @@KJRaycing
it steers surprisingly easy
My 10 year old daughter does just fine without power steering. I donMt know how else to say they don’t need it. But it is your build after all and you can do it however you want 👍
Anyone need any steering wheel centers for their crosscart?
Love em!
@@KJRaycingI'm going to need the special Trick setup for the thundercat engine.
Aku sangat mengingin kan mobil seperti ini :'(
I would love to build a cross cart but plans are to expensive and I don't have all the tool 😭😭😭😭😭😭😞😞😞😞😞
Sounds waaaayyyy underpowered
The side by side comparison was laughable…someone was asleep at the wheel
I’m guessing you don’t have a lot of experience with motorcycle powered buggies… On short, tight tracks they never get a chance to get into that awesome 100 hp power band.
@@KJRaycing you are absolutely correct, and the Predator machine can virtually do a full lap without lifting
Hey love the content guys, question do u happen to sell any of these go karts because I’m would be more than happy to
Buy one of these bigger and faster ones. Let me know if you have a email or text message so we could possible discuss this
Thanks 🙏🙏
You would be in a very long line. Time to man up and start building one 🦾😁