00:38 - How to reformat USB/Flashdrive (program Download in description). 01:25 - USB/Flash FOLDER PATH. 02:34 - grab a save from your PS3 that you wish to play on. 03:24 - Install Bruteforce 06:27 - Configure Bruteforce 07:34 - Incase it doesn't flawlessly instal first attempt, try this. 08:50 - describing some things Bruteforce can do.
so yeah hi bro i have an old ps3 without a hard drive so i bought a hard drive and tried to turn on the ps 3 but it doesn't show anything so i need to download ps3 operating system right? or there is a nother solution? please tell me i am really excited to play games on it
@@manihab Its been a long time since I've dealt with this problem.. Theres a lot I dont remember about for example where the operating system saves, pretty sure to the inbuilt flash drive.. There is NOR and NAND, and they do it differently.. cant remember how to know the difference.. most are NOR, but some of the earlier FATS were NANd. were you on official firmware or custom (jailbreak) ?? So I'm assuming you are getting just a black screen? Have you tried make sure it still works with the original HDD (If you still have it??? On the front of the console, do you get a red light?, red light is a dead console.. or HDMI output has crapped out.. Could be wrong.. As I said, its been several years since I messed with such issues. but from memory, orange means reading hdd, red means dead.. green well thats all good. Here is program to format to HDD to fat32.. - www.mediafire.com/file/beapu6erm936ewi/guiformat.exe/file Have you tried the recovery menu ? To access it you hold the on button, it will turn on, then it will beep and turn off.. let off button for about a second, then press and hold again untill you hear 2 beeps then release button, You should get asked if you can see screen ect, this is recovery menu... from here can install new firmware. (not Operating system). theres a list of downloadable firmware here you could put on USB to put on ps3 - darthsternie.net/ps3-firmwares/ For CFW - www.brewology.com/downloads/?dcid=511 I DO NOT remember for sure if it needs to be same firmware you were already on.. and honestly dont even remember how to downgrade anymore. Normally with a new HDD, you would make sure to format in fat32, then just go to recovery menu and update firmware manually with USB. Sorry if I cant help much, been a long time since I troubleshoot with hardware issues. Last time my jailbreak died, just bought a new one for $220 AUS.
I can't tell you anything I didnt already go through with the KzEnergiez thread you replied to.. Theres a series of things that need to be installed, .net framework, make sure you clicked on the .dll installer first If you go through the things we did on that list of suggestions, something worked for him, what exactly the problem was I really dont know.. he never told mme what fixed it.
Sorry i replied to someones comment, i have downloaded it (without a virus) thank you so much, but it says in missing the msvbm, i downloaded the dll, installed bruteforce, it asked me if i wanted to configure global settings, i clicked yes to a few things, it installed, it loaded up, the mouse had rhe circle round it then it closed, ant help would be appreciated mate, thank you for a download that wasnt a trogan
Yes, i'm not only one having this problem, seems the "Authorities" are trying to eliminate "alternative" programs.. Apparently alot of people getting virus warnings on Bruteforce.. Most likely Because SONY never wanted us messing with our savegames.. heres the thing, its NOT infected or dangerous, its the EXACT same file and link I gave on my tutorial 3 years ago.. Others have same problem, where all of a sudden Windows Defender and other programs are flagging Bruteforce. But found another copy that doesnt do this and updated it in description. Heres a direct link for you.. www.mediafire.com/file/gnxoeysb6a3xpu5/Bruteforce_Save_Data_v4.4.2.rar/file And the source where I found it - digiex.net/threads/ps3-bruteforce-save-data-v4-4-2-download.13290/#google_vignette If you read the comments in this last link will see, its not infected, but for some reason people are getting this warning and automatic quarantine.. only in last few years. I never changed the file, just gave you guys same lnk from old video, its IMPOSSIBLE it got infected just sitting online doing nothing. Anyhow, I know people trust thier bogus anti-virus so I provided a link to one with no warnings (yet).
@@kzrenergyz the .dll Files?? The new download should provide all you need, if not I'll try help you out. Make sure to go to "program folder" where its installed, and click "uninstall" make sure its clean when trying to re-install. Then try the new download.. Bruteforce_Save_Data_v4.4.2 - Bruteforce_Save_Data_installer
@@kzrenergyz If there is any files missing, its always the .dll files, here they are, open them all and drag and drop into bruteforce root folder (where its installed in program files). -- To access install directory, right click on bruteforce shortcut and select "open file location" Drop these files in there. www.mediafire.com/file/a6j7cerm49lnm7o/DLL.zip/file
I installed bruteforce using the link you provided but when i extract the file i dont have the 'msvbvm' folder you have so i cant open and run bruteforce on my pc?
www.dll-files.com/msvbvm50.dll.html - site www.mediafire.com/file/a6j7cerm49lnm7o/DLL.zip/file - one off my old downloads. Used to be you could just install bruteforce then throw the .dll into the Bruteforce install folder.. this second one is a little program that should install the bvm50.dll automatically when installing bruteforce.. if not... double click the BVM50.dll program to install itself. (cant remember if you do before or after the bruteforce install).
00:38 - How to reformat USB/Flashdrive (program Download in description).
01:25 - USB/Flash FOLDER PATH.
02:34 - grab a save from your PS3 that you wish to play on.
03:24 - Install Bruteforce
06:27 - Configure Bruteforce
07:34 - Incase it doesn't flawlessly instal first attempt, try this.
08:50 - describing some things Bruteforce can do.
so yeah hi bro i have an old ps3 without a hard drive so i bought a hard drive and tried to turn on the ps 3 but it doesn't show anything so i need to download ps3 operating system right?
or there is a nother solution?
please tell me i am really excited to play games on it
btw its ps3 fat
@@manihab Its been a long time since I've dealt with this problem..
Theres a lot I dont remember about for example where the operating system saves, pretty sure to the inbuilt flash drive..
There is NOR and NAND, and they do it differently.. cant remember how to know the difference.. most are NOR, but some of the earlier FATS were NANd.
were you on official firmware or custom (jailbreak) ??
So I'm assuming you are getting just a black screen?
Have you tried make sure it still works with the original HDD (If you still have it???
On the front of the console, do you get a red light?, red light is a dead console.. or HDMI output has crapped out..
Could be wrong.. As I said, its been several years since I messed with such issues. but from memory, orange means reading hdd, red means dead.. green well thats all good.
Here is program to format to HDD to fat32.. - www.mediafire.com/file/beapu6erm936ewi/guiformat.exe/file
Have you tried the recovery menu ?
To access it you hold the on button, it will turn on, then it will beep and turn off.. let off button for about a second, then press and hold again untill you hear 2 beeps then release button, You should get asked if you can see screen ect, this is recovery menu... from here can install new firmware. (not Operating system).
theres a list of downloadable firmware here you could put on USB to put on ps3 - darthsternie.net/ps3-firmwares/
For CFW - www.brewology.com/downloads/?dcid=511
I DO NOT remember for sure if it needs to be same firmware you were already on.. and honestly dont even remember how to downgrade anymore.
Normally with a new HDD, you would make sure to format in fat32, then just go to recovery menu and update firmware manually with USB.
Sorry if I cant help much, been a long time since I troubleshoot with hardware issues.
Last time my jailbreak died, just bought a new one for $220 AUS.
Hi Bro, i can resign a save data from other user if my Playstation Is no hacked? Or need hack my PS3 to use this program
Bro, do you have a solution? When I finished installing brute force and ran bruteforce it immediately came out, is there a solution?
What do you mean by came out ???
@@Scaley_Reptile When I open brute force, it exits by itself
@@Scaley_Reptile I apologize when my English is bad, because I use Google Translate 😅
@@deantatuwo9864 I'll try research, this has never happened to me...
I can't tell you anything I didnt already go through with the KzEnergiez thread you replied to..
Theres a series of things that need to be installed, .net framework, make sure you clicked on the .dll installer first
If you go through the things we did on that list of suggestions, something worked for him, what exactly the problem was I really dont know.. he never told mme what fixed it.
Sorry i replied to someones comment, i have downloaded it (without a virus) thank you so much, but it says in missing the msvbm, i downloaded the dll, installed bruteforce, it asked me if i wanted to configure global settings, i clicked yes to a few things, it installed, it loaded up, the mouse had rhe circle round it then it closed, ant help would be appreciated mate, thank you for a download that wasnt a trogan
Dont work on windows 11
Hi, can you share the brute force files please? The file in your old video is considered as a dangerous file by Mediafire. Thx
Yes, i'm not only one having this problem, seems the "Authorities" are trying to eliminate "alternative" programs..
Apparently alot of people getting virus warnings on Bruteforce.. Most likely Because SONY never wanted us messing with our savegames..
heres the thing, its NOT infected or dangerous, its the EXACT same file and link I gave on my tutorial 3 years ago..
Others have same problem, where all of a sudden Windows Defender and other programs are flagging Bruteforce.
But found another copy that doesnt do this and updated it in description.
Heres a direct link for you..
www.mediafire.com/file/gnxoeysb6a3xpu5/Bruteforce_Save_Data_v4.4.2.rar/file
And the source where I found it - digiex.net/threads/ps3-bruteforce-save-data-v4-4-2-download.13290/#google_vignette
If you read the comments in this last link will see, its not infected, but for some reason people are getting this warning and automatic quarantine.. only in last few years.
I never changed the file, just gave you guys same lnk from old video, its IMPOSSIBLE it got infected just sitting online doing nothing.
Anyhow, I know people trust thier bogus anti-virus so I provided a link to one with no warnings (yet).
I tried to install Brute Force with files I found on the internet but after I installed it, when I open it, it closes itself.
@@kzrenergyz Which files were they?
@@kzrenergyz the .dll Files??
The new download should provide all you need, if not I'll try help you out.
Make sure to go to "program folder" where its installed, and click "uninstall" make sure its clean when trying to re-install.
Then try the new download..
Bruteforce_Save_Data_v4.4.2 - Bruteforce_Save_Data_installer
@@kzrenergyz If there is any files missing, its always the .dll files, here they are, open them all and drag and drop into bruteforce root folder (where its installed in program files). --
To access install directory, right click on bruteforce shortcut and select "open file location"
Drop these files in there.
www.mediafire.com/file/a6j7cerm49lnm7o/DLL.zip/file
I installed bruteforce using the link you provided but when i extract the file i dont have the 'msvbvm' folder you have so i cant open and run bruteforce on my pc?
Ill work it out...
Did you have any luck yet?
sorry for such a late reply.. I havent been on here for months.. life been busy,
www.dll-files.com/msvbvm50.dll.html - site
www.mediafire.com/file/a6j7cerm49lnm7o/DLL.zip/file - one off my old downloads.
Used to be you could just install bruteforce then throw the .dll into the Bruteforce install folder..
this second one is a little program that should install the bvm50.dll automatically when installing bruteforce..
if not... double click the BVM50.dll program to install itself. (cant remember if you do before or after the bruteforce install).
@@Scaley_ReptileI downloaded the dll file, I configured it globally, bruteforce opens but then it crashes instantly
@@callumgray3810do you gotit?