$210 VEVOR Mag Drill Press - review using 2" TCT Annular Cutters

VEVOR Magnetic Drill Press review using 2" TCT Annular Cutters
Quick overview demonstration of the:
VEVOR Mag Drill Press, 1550W 2" Boring Diameter, 2922lbf Power Magnetic Drill, 500 PRM, 10-Speed, Electric Drilling Machine for Metal Surface, Industrial and Home Improvement
Demonstrates drilling a 2" hole in 1/2" mild steel in 30 seconds.
Associate links to the products shown in this video:
The drill itself:
* Vevor Mag Drill, 2" clearance, no bits ($210):
- tinyurl.com/3zh9rsn2
This is the "good" (LOLz still kinda cheesey) TCT (tungston Carbide Tipped) bit that drilled a perfect hole, with no observable runout (can be run with internal coolant):
* Steel Dragon Tools 2" Annular Cutter for Weldon ($72):
- tinyurl.com/yeaceh33
This is the cheesey TCT (tungston Carbide Tipped) bit that has ~1mm runout after the Weldon to 3-jaw adapter (no internal coolant ability):
* Meccion 50mm Annular cutter for 3-jaw chuck ($15):
- tinyurl.com/rvmehp6v
Retractable Keychain thing for holding the chuck key
* MNGARISTA 2 Pack Retractable Keychain ($14 for 2-pack):
- tinyurl.com/yc5dpbck

[@donaldoehl7690]

I've watched several vids on these drills and it seems like no-one knows how to drill a hole properly! I was taught to pump the drill in order to break and clear the chips. This also helps keep the drill and workpiece cool plus allows coolant to flow into the hole. Your drills will go much farther between sharpenings as well. I can still hear my mentors shouting at me across the shop "PUMP THE DRILL!"

[@lawndartmike7099]

Thanks for the information. I just recently also picked up a Vevor annular cutter/drill. On the first day I drilled 64 5/8” holes. It took less than 1/3 of the time as using a drill press and standard drills. I’m definitely happy with mine so far.

[@Graham9042]

Just by eyeball, I can see a horrifying amount of runout on that first bit in the three jaw chuck.

[@freeradical6390]

With practice you will feel the right pressure when the teeth are cutting right. The more coolant-lube the better and go slow n steady. It bound up from the bit expanding when it gets hot.

[@ym.galaxygalaxy8337]

سلام . قیمت این را۲۱۰ دلار گذاشتید ؟ درسته ؟ من ایران هستم اینجا قیمت چند برابره

[@ralphhowes]

Audio needs work - voice too low, drill too loud.