Crazy Drill Press From the Future! Is the Nova Viking Worth $1000?

Поділитися
Вставка
  • Опубліковано 10 чер 2024
  • Crazy Drill Press From the Future! Is the Nova Viking Worth $1000?
    Nova Viking drill press review. I need to make space in my shop so I'm replacing my floor standing Jet drill press with the Nova Viking bench top machine. It's got some crazy features. Is it worth the investment?
    Nova Viking Benchtop Drill Press: amzn.to/2OV9oVS`
    ★ ALL THE LINKS ★
    Music by Me: goo.gl/fgyup2
    Patreon Support / Extra Content: / picciuto
    T-Shirts / Books / Stickers / Plans: makesomething.tv/
    Making It Podcast: makingitpodcast.com
    ★ FOLLOW ME ★
    / drunkenwood
    / makesomethingtv
  • Навчання та стиль

КОМЕНТАРІ • 781

  • @MakeSomething
    @MakeSomething  4 роки тому +32

    Hey ya'll I fixed the video description. Sorry for the confusion. I blame Dan!

  • @StumpyNubs
    @StumpyNubs 4 роки тому +128

    I've had the full sized Nova DVR drill press for a little over a year. Love it. Wait until you try tapping threads with it. It periodically auto reverses to clear the metal shavings as it cuts the thread.

    • @80211Denver
      @80211Denver 4 роки тому +12

      One of you should do a video demo of that

    • @mikemulligancopilotdesigns9904
      @mikemulligancopilotdesigns9904 4 роки тому +2

      Stumpy Nubs yeah that’s the first thing I thought of. I used to work in a factory making locks for a pickup bed cover and would pump out around 400 a day and had to drill and tap each one only had a 12v drill to do the tapping with. I’m sure I could have made 800 a day with that setup!:)

    • @sergiopereira
      @sergiopereira 4 роки тому

      Why is the head of this smaller Viking model so much taller than the one in the Voyager (the floor model). Is the Voyager not direct drive? It has higher horsepower.

    • @qwerty3663
      @qwerty3663 4 роки тому +2

      @@sergiopereira Integrated vs bolt on motor.

    • @davidcl64
      @davidcl64 4 роки тому

      The voyager has a lower speed limit of 150 I believe. Does that impact its usefulness for tapping?

  • @AnthonyBowman
    @AnthonyBowman 4 роки тому +22

    Best part is Cameraman Dan not help David struggle to get the damn thing in the door. Excellent documentarian.

  • @zavoina
    @zavoina 4 роки тому +24

    "Why reverse?"
    "To go backwards." |
    Loving it.

  • @bobbysharp
    @bobbysharp 4 роки тому +82

    I'm sold ordering one right now....after I get some drug money.

    • @griffinmakes
      @griffinmakes 4 роки тому +3

      That line killed me lol.

    • @bigdogmn73
      @bigdogmn73 3 роки тому

      You didn't get your drug money in the mail yet?

  • @JesseLavery
    @JesseLavery 4 роки тому +77

    Did NOT see that ending coming. 😂 Loving the return of the lighthearted tone over the last few videos. (My kids still occasionally bust out your old "who's in your house?!?" line.) Good stuff.

    • @tylerbourque100
      @tylerbourque100 4 роки тому +2

      Was gonna suggest you just drag that thing out into the driveway but that was definitely more time efficient

    • @firechicken5
      @firechicken5 4 роки тому

      Thanks for that comment. I almost missed that part

  • @YouCanMakeThisToo
    @YouCanMakeThisToo 4 роки тому +7

    I never thought I’d have drill press envy. But here I am.

    • @curbstalker6577
      @curbstalker6577 4 роки тому

      YouCanMakeThisToo I thought the same thing

  • @TokiNotAB
    @TokiNotAB 4 роки тому +15

    omg the amount of happiness in this video! It's like watching a kid on christmas and I LOVE IT!!!!!!!!

    • @iancrossley6637
      @iancrossley6637 4 роки тому

      Funny I find it annoying. Nice drill press though.

  • @josephdestaubin7426
    @josephdestaubin7426 4 роки тому +12

    Reverse should fill in the hole when you mistakenly drilled in the wrong place.

  • @BenHolmen
    @BenHolmen 4 роки тому +4

    I haven't had this much fun watching a tool unboxing/setup/review video EVER.

  • @musicbymark
    @musicbymark 4 роки тому +24

    RE: INSERTS - suppose you could make ONE round replacement that has a SQUARE opening in ITSELF, allowing you to make square replacements.

    • @badbatch974
      @badbatch974 4 роки тому

      Mark Young that’s what I was thinking. Just make a metal insert with a square hole to put sacrificial wood inserts in.

  • @JkCanvas
    @JkCanvas 4 роки тому +1

    I am so glad you are having fun in the shop again. I now have Drill Press Envy. Looking forward to seeing how you incorporate this into your woodworking builds. LOVE IT MAN

  • @cardboardorigami
    @cardboardorigami 4 роки тому +16

    My friend just bought the same one, I got to use this press recently. I love it. Maybe you could make one round plate with a square insert for easy replacement

  • @homegamerengineer3747
    @homegamerengineer3747 4 роки тому +1

    I love the more light hearted mood. Looks like you are having fun, so I am having fun.
    Thanks for sharing!!!

  • @fatfuzzypotato6113
    @fatfuzzypotato6113 4 роки тому +10

    The little triangle thing that you thought was a insert remover is a Morse taper removal tool you put the quill down and there is a slot that you put it in and it will wedge the chuck out

    • @felixf5211
      @felixf5211 3 роки тому +1

      FWIW, it's called a drift.

  • @EthanCarterDesigns
    @EthanCarterDesigns 4 роки тому +1

    Your excitement in this video is so contagious - I love it! That thing looks amazing!!! Another great edit Dan! Hahaha and that ending!

  • @rays.5800
    @rays.5800 4 роки тому +51

    The tool is a drift to get the chuck out and put a morass taper drill in.

    • @diymatt
      @diymatt 4 роки тому +26

      Because we all need morass in our life.

    • @jacksat2252
      @jacksat2252 4 роки тому +2

      Can use it to easy change the keyless with this one ,both should have the same taper.

    • @justind8521
      @justind8521 4 роки тому +7

      Ray is right. If you extend the quill you'll see it has a slot in it. You insert the tool and give it a tap and the wedge shape will eject the morse taper arbor that holds the chuck. When you get your keyless chuck, get an extra arbor, then you can quickly swap chucks.

    • @McFlysGarage
      @McFlysGarage 4 роки тому +6

      -chortle-
      Morass

    • @jonahbrame7874
      @jonahbrame7874 4 роки тому +5

      Pssst it’s Morse

  • @davidbierhaus1394
    @davidbierhaus1394 4 роки тому

    You guys are knocking out of the park with these last couple videos! Incredible work!

  • @bluecollarmoneymatters8246
    @bluecollarmoneymatters8246 4 роки тому +22

    "I may make my own fence." (Sounds like he's on the fence about it.)

    • @Jonas_Keunecke
      @Jonas_Keunecke 4 роки тому

      Aaah... thanks.. that was classy

    • @sergiopereira
      @sergiopereira 4 роки тому

      And that fence is a $80 add-on. It probably works better on the Voyager's table that has parallel slots. The Viking only has the X slots.

  • @ZMAC441
    @ZMAC441 4 роки тому

    Having Dan edit videos might be one of the best decisions ever! Love your videos and now I am literally laughing out loud while watching. The candidness his style brings adds a whole new level. I am pumped to see how the channel changes and progresses and love the direction you’re taking it as well as doing what makes you happy, it is defiantly showing through with how optimistic you are.

  • @woodshop7487
    @woodshop7487 4 роки тому +5

    Without question, you're funniest video ever and prob the funniest youtube video I've seen... . I was in tears... I had to rewind it twice.... love it David. The drill is a beast as well. Very jealous.... lol. 😂😂😂😁😁😁

  • @kipsimpson2332
    @kipsimpson2332 4 роки тому

    This is one of my favorite videos from you. Seeing you getting excited about this cool tech is contagious. Loved the spontaneo hug.

  • @brentfowler2317
    @brentfowler2317 4 роки тому

    I love the new focus. You and Bob, and Jimmy. You three are what got me into woodworking. I've been at it for about a year now. Well getting a shop set up, and working with wood is a passion of mine. And it's thanks to you three. Keep up the great video. And the great work.

  • @crisvega7588
    @crisvega7588 4 роки тому

    Really enjoyed this format, this kinds vlog style really let your personality shine even more and awesome to see Dan having fun.

  • @jmakes3745
    @jmakes3745 4 роки тому +4

    Loving your last few videos David! Such a positive energy, and the little comments and joke can't help but make me burst out laughing!

  • @bossmonster3319
    @bossmonster3319 4 роки тому +1

    Dude! This was not a woodworking video and I haven't seen a more fun-loving enjoyable video this good in a long time. NAILED IT!

  • @alkalinedale
    @alkalinedale 4 роки тому

    Gotta stop saying this isn’t a comedy channel. You two having fun adds so much to the videos. Please keep adding it.

  • @teammoon4017
    @teammoon4017 4 роки тому

    David, I really enjoyed the video, I could tell you really had fun making it, and it shows.

  • @sergiopereira
    @sergiopereira 4 роки тому

    Love your channel David. Please never stop.

  • @design-ov8td
    @design-ov8td 4 роки тому +1

    I would have never thought I would laugh so hard watching a drill press review!! You are the best!! Thanks for all you do!!!

  • @ausgra17
    @ausgra17 3 роки тому

    Great video, full disclosure, honest and FUN!

  • @matthewpsaville
    @matthewpsaville 4 роки тому

    Hey Dave. Love the style and passion of your new vids. Cheers.

  • @DumpsterMarcus
    @DumpsterMarcus 4 роки тому

    Dude This video was the best!!!! You guys are too funny!! Love the back and forth talk! The drill press is just wow!! Crazy awesome!!

  • @GiacoWhatever
    @GiacoWhatever 4 роки тому +5

    Your enthusiasm is making me buy one right now. I just hope I can get it at this side of the pond!!!

    • @GiacoWhatever
      @GiacoWhatever 4 роки тому

      And I’m just 7 min into the vid

    • @MakeSomething
      @MakeSomething  4 роки тому

      I’m loving the vlog! You’re killing it!

    • @GiacoWhatever
      @GiacoWhatever 4 роки тому

      Make Something means a lot from you! 🥰

  • @matromik1
    @matromik1 4 роки тому +49

    I have to say, showing more of your actual personality in these videos makes them so much more entertaining and fun. Also I dig tool reviews so 👍🏻👍🏻

    • @MrAlklein
      @MrAlklein 4 роки тому +1

      I didn’t wanna watch this video for entertainment and fun I just wanted to review I dislike him showing more of his personality

    • @johndeaux9987
      @johndeaux9987 3 роки тому

      Ironically, that's why I gave it a thumbs down....just review the product and stop wasting time is my opinion. If only he was as funny as he thought he was, he'd be onto something.

  • @scottsh21
    @scottsh21 4 роки тому

    Really fun video. Enjoyed it very much. Plus great break down of the DP for an initial use.

  • @chadstoudt2580
    @chadstoudt2580 4 роки тому

    Love the new style of video. Keep it up man! The ending was the best part hahaha.

  • @dallastaras
    @dallastaras 4 роки тому +34

    “This one has 4 1/2 inches ... my other had 3...” *Dan immediately starts laughing* #twss

    • @BurninGems
      @BurninGems 4 роки тому +1

      Size doesn't matter? Lol

    • @griffinmakes
      @griffinmakes 4 роки тому +6

      @@BurninGems it's not about the travel distance, it's about how you drill the hole.

    • @anthonydtobias
      @anthonydtobias 4 роки тому +1

      Ha ha 😂

  • @coburninator
    @coburninator 4 роки тому

    Fun vid and helpful vid. Seems like the new video formula is working out great.

  • @johnmunoz8845
    @johnmunoz8845 2 роки тому

    Love your video! Love your new drill press! I get your frustrations with your old drill press. When your under the gun to get things done and you're in the zone. You need your equipment to run and work smoothly period. Thanks for the great info. I am researching for my new drill press. This is very helpful.

  • @wadeb.5509
    @wadeb.5509 4 роки тому +8

    Round insert may be for the same reason that man hole covers are round. No fall-ey downy the holey thingy

    • @lanceheroatlarge
      @lanceheroatlarge 4 роки тому +1

      Round inserts....simple. I’m sure someone has already commented this idea but here goes. I’m guessing the insert is a standard hole saw size? Make a bridge template out of MDF to fit the hole saw. Size the gap underneath to fit the wood size for your insert (width and thickness). Line up your template with the hole saw (minus the pilot bit) and clamp it down. Slide in your desired insert wood and cut an insert....push and cut another, push and cut, push and cut. Now the Nova is making its own inserts. Just think of the possibilities.... Walnut insert, Red heart, Purple Heart, Zebra Wood....Now you not only have one of the coolest drill presses but also the most stylish. Great video keep them coming.

  • @mannyboga3815
    @mannyboga3815 4 роки тому

    This video was so fun!

  • @Hubbmade
    @Hubbmade 4 роки тому

    Amazing video for an amazing tool! Super fun to watch, thank you!

  • @MrDanyoumell
    @MrDanyoumell 4 роки тому

    Great video! Thanks!

  • @davidgerregano4464
    @davidgerregano4464 4 роки тому

    That was great stuff. Thank you

  • @FredMcIntyre
    @FredMcIntyre 4 роки тому

    Awesome video David! 😃👌🏻👍🏻👊🏻 .. Super cool new drill press, seems like all of those features would be really useful for tapping as well!

  • @alexmaggiacs7235
    @alexmaggiacs7235 4 роки тому

    Camera Dan's Editing > Dave's editing.
    Fight me *Laughs*
    Great content as always! Love that the lighthearted tone has come back to your videos.

  • @mikechadwick2785
    @mikechadwick2785 4 роки тому

    Dan!! I hope you see this friend. I love your editing. It might get repetitive in the future but right now it is hilariously refreshing. Keep it up!

  • @NWGR
    @NWGR 4 роки тому +2

    You had me giggling the entire video lol Priceless ending! XD
    I thought I was happy with my faithful ridgid drill press.
    I *thought* I was...
    This one is going on my short list. As much as I use my drill press, the features this one offers would improve my work efficiency by a ton.

  • @davetrack2950
    @davetrack2950 4 роки тому

    The camera work, editing, and music on this video are top notch. That was a sensual unboxing.

  • @BitsandWood
    @BitsandWood 4 роки тому

    Dude, this is the best tool review/unboxing video ever! :D

  • @skewedmaker
    @skewedmaker 4 роки тому +1

    Most entertaining unboxing video I've seen in some time. Your genuine sense of awe at discovering the drill slowing down and reversing was like a kid opening a new toy on Christmas day...though I hope you didn't get caught watering the tree like that

  • @handymadness
    @handymadness 4 роки тому

    Love the comedy and editing!!

  • @mirceabascuti
    @mirceabascuti 4 роки тому +2

    The stop and then reverse is for threading with taps in blind wholes!
    Awesome feature!

  • @jtrain79
    @jtrain79 4 роки тому

    Loved this video

  • @Martinsolberg
    @Martinsolberg 4 роки тому

    Congrats, Looks and sounds awesome!

  • @groobus
    @groobus 4 роки тому +5

    It's not often you get the little kid excitement giggles as an adult. Worth every penny just for that.

  • @johnhanson974
    @johnhanson974 4 роки тому +5

    "My current drill press is too big." Said only one person... ever! That Nova is sweet though!

  • @LordHog
    @LordHog 4 роки тому

    @Make Something, did you get a keyless chuck for this DP yet? If so, which one did you get or could you recommend one for this model? I am about to pull the trigger on this bad boy. Thanks.

  • @shopcatt643
    @shopcatt643 4 роки тому

    Great video! Cool drill press!

  • @diycharger1760
    @diycharger1760 4 роки тому

    Beautiful man.. Piece of art

  • @alexclark6777
    @alexclark6777 4 роки тому

    I don't know how this is possible but your videos are getting even funnier.

  • @stevecuthbert8856
    @stevecuthbert8856 4 роки тому +1

    It's a good thing the camera didn't pan down because I swear you had a woodie playing with that cool drill press.

  • @LutherBuilds
    @LutherBuilds 4 роки тому

    So glad that you didn't leak the end of the video on the podcast. 😉😉

  • @MrBUNGENEERS
    @MrBUNGENEERS 4 роки тому +1

    That was the best ending ever haha👌 like it that you made a big turn in youtube! And btw nice drillpress never saw one like this.

  • @ronswoodturningshopandstuf5759
    @ronswoodturningshopandstuf5759 4 роки тому +1

    I upgraded my Nova 1624 wood lathe with the DVR controller. Whole new world of control and safety. Shuts down if you get a catch and applies more power to be consistent on speed. Love it!!

    • @MakeSomething
      @MakeSomething  4 роки тому

      looking at getting one of their lathes in the future!

  • @jonsoydinc2908
    @jonsoydinc2908 2 роки тому

    Because of your impressive video and info on this drill press, I went and bought one, thanks 👍

  • @jamal69jackson77
    @jamal69jackson77 Рік тому

    Didn't even know this drill press existed... I'm buying one! Excellent video!

  • @WasimBarri
    @WasimBarri 4 роки тому

    David, what's it like for accuracy? What about run out? Is a 1/2" hole 1/2" or is it bigger? My current drill press has that problem and looking to upgrade. This looks great.

  • @FigmentsMade
    @FigmentsMade 4 роки тому

    It was nice to get a closeup view of the carpet there. 😁
    Loving the humor!

  • @robdean54
    @robdean54 4 роки тому +1

    Thanks so much for making this! I've had my eye on the floor model for a long time, but think I'm gonna get this one instead and mount the head to my floor model for added distance. Cannot wait to drill glass! hopefully this will cut down on cracking on some whiskey bottles. Also do you have a link for the keyless chuck? thanks!

  • @builditorbust4801
    @builditorbust4801 4 роки тому +1

    Great video! I actually laughed out loud. Did you order this in town or on the interwebs? I never knew how much I disliked my drill press until now.

  • @CanadianParamedic
    @CanadianParamedic 4 роки тому

    GREAT VIDEO!

  • @vonormykirk
    @vonormykirk 4 роки тому

    Best review video on the you tubes.

  • @sgsax
    @sgsax 4 роки тому

    Dude, this one absolutely slayed me. Brilliant information and that is a beautiful Cadillac of a drill press, but the entertainment value is through the roof. And can we just take a moment to appreciate the footage at 11:55? Thanks for sharing!

  • @GlassImpressions
    @GlassImpressions 4 роки тому +17

    I have their floor unit and it is one of the best tools in my shop. PS, reverse for tapping.

    • @hypnolobster
      @hypnolobster 4 роки тому

      I'm kicking myself for not ordering one like ~3 years ago. They're $600 more now than they used to be.

    • @ManCrafting
      @ManCrafting 4 роки тому

      Glass Impressions twss

    • @markdammes1947
      @markdammes1947 4 роки тому

      Reverse for drilling snapped bolts?

  • @wilcoxtube
    @wilcoxtube 4 роки тому

    David - thank you for making this, because I have been intrigued by this machine for awhile. Question about that fence - it did seem like it does not get very close to the drill itself? Like to drill very close to the edge of a board? Is that an issue?

  • @jeffmarks3218
    @jeffmarks3218 4 роки тому

    Dave, I just got one this week. Love it too. I did notice that the back adjustable LED light underneath does not light up. The 2 front LEDs work though. Does your adjustable LED back by post light up?

    • @dmcwoodworx2968
      @dmcwoodworx2968 4 роки тому

      I think that the top right Yellow Button will fix the problem, after a couple of presses to go through it's options. This worked for me.

  • @marknylund1808
    @marknylund1808 3 роки тому

    Love the video. I’m getting one for my shop, but I need to wait almost 5 months for delivery.

  • @LReBe7
    @LReBe7 4 роки тому +2

    9:16 that wedge is for driving out the Morse taper with which the drill chuck is mated to the quill.

  • @PR-WoodWorkingCreations
    @PR-WoodWorkingCreations 4 роки тому +2

    *Super Cool!! Drill Press, Amazing* 👍👌👏🌟

  • @martymurphy7852
    @martymurphy7852 4 роки тому

    Love it buddy. Love it.

  • @karl_alan
    @karl_alan 4 роки тому +3

    Hmm....I love circular inserts. Been using them on mine for years.
    Essentially the benefit is if you have the center of the stand off center from the circle, you can continually rotate the insert to get areas that haven't been eaten up yet, making it so you need to change inserts way less often because they are so reusable.

  • @yanaskaler8523
    @yanaskaler8523 2 роки тому

    What height workbench do you recommend for this machine? I have three of these arriving at work and need to make a bench for them.

  • @mattharrison4655
    @mattharrison4655 3 роки тому +1

    What is the overall height of this drill press? From the top of the motor to the base. Cant find it anywhere.

  • @ZeroBalanceBuilds
    @ZeroBalanceBuilds 4 роки тому +1

    Dude. Great. Great. Great. My wife was asking why the hell I was laughing at a drill press video.

  • @emungai
    @emungai 4 роки тому +2

    It's round for the same reason manhole covers are round.
    A round lid will not fall through a round hole.

  • @industrialarts3921
    @industrialarts3921 4 роки тому

    LOL I didn't see that coming! Great video!

  • @BeInspiredwithDominic
    @BeInspiredwithDominic 4 роки тому

    Frankly, I don't know what I want for my shop more - such a cool drill press or a Dan. Thanks for sharing, David!

  • @DesignCraftWorkshop
    @DesignCraftWorkshop 4 роки тому

    You just convinced me to get one 👍🏻 it will be my first and final drill press

  • @mattmaloney5626
    @mattmaloney5626 4 роки тому

    Great video once again, rockin the authentic change up and Dan edits. My eight year daughter Olivia loves watching your videos with me. She said today, "he's funny. I think he refuses to grow up! He should built a penny floor in the floating head corner." So, challenge accepted?

  • @thomasverdi2056
    @thomasverdi2056 4 роки тому +3

    Love to see you energy and passion is back. And yes I did love the drill press until. Pppppppppeeeee

  • @jaykepley5238
    @jaykepley5238 4 роки тому

    Beautiful new machine! You can capture most of the dust/shavings by putting dust collection near the bit. I plan on using one of the hoses that will stay where you put it. In the meantime, I've been using a bungee cord and a shop vac hose. Works great.

  • @JeremiahL
    @JeremiahL 4 роки тому

    I like the how you guys are joking around in your recent videos! I read a post somewhere where you were saying that you cut all of the jokes out because you want to come off as serious... I definability like the humor...

  • @JonathanRansom
    @JonathanRansom 4 роки тому

    Best unboxing sequence I've ever seen.

  • @rodpotts2666
    @rodpotts2666 4 роки тому +1

    That was a cool unboxing.

  • @Pickswitch
    @Pickswitch 4 роки тому

    I loved the old style but I gotta say I'm loving Dan's editing style a lot. Great stuff man

  • @ToughNut_Audio
    @ToughNut_Audio 5 місяців тому

    Thanks for the great review. Do you feel that the Viking has enough Torque to push a 2-1/2" Forstner bit 2" into hard maple. I have been looking at the bigger model but I would rather save the cash and like you, upgrade the chuck. cheers

  • @Parkhead_workshop
    @Parkhead_workshop 4 роки тому

    Love the humour in this

  • @almagill
    @almagill 4 роки тому

    Happiest Valentine's Day video ever...
    Dan, in the name of all that's Holy, don't leave him alone with that machine.