Great video. Can the divider that you show in the polishing step be used in the initial grinding step. I have several small pieces - 2x2x2 and 3x2x2 and would like to do several at the same time. Thanks
@@hisglassworksinc Thanks for the speedy reply on a 10yo vid! The manufacturer does state it works with metal well, was just asking if you had any real world experience. I'll keep asking around.
A very good, informative and useful video, thank you. I know you don't supply the glass blocks shown in this and other videos so can you give me some suggestions as to where I may be able to obtain them?
Yes, the smaller Rociprolaps in the 20 inch size start at about $1900.00 without shipping or crating. They are also available in 24 inch, 30 inch, and 36 inch from our website.
Enjoyed the video, however, I'm kind of new to having a desire to get into glass as a hobby. What is it exactly that you were going to use that glass block for? It turned out very nice, but what is the final piece going to be? Thanks.
@loriglass I don't think it would make a lot of difference. The aluminum oxide will break down faster, but that shouldn't be an issue at all. We just used silicon carbide because it's what we have on hand. Either would work just fine though.
This actually becomes the center of a larger piece. It has dichroic glass laminated between pieces of lead crystal and then is inserted into a larger spherical shape.
Would a rociprolap or vibralap be able to polish something small like milli chips. I’m thinking of using hockey pucks to weigh down the chips, but wasn’t sure if that would be enough weight.
As long as there is enough weight on them it should work. I would work up a jig to put multiple pieces at one time (cast in plaster or wax or something like that with extra weights).
I'm researching flat laps and one reason I like the reciprolap is that you don't need a constant water supply. My one concern is how much does the wheel weigh? I'm a 68 year old woman and can easily pick up around 20 pounds, but this looks heavier. Thanks.
+luminousglassart A 24 inch Rociprolap pan weighs about 45 pounds. I would definitely say it is easier to handle with two people if you need to remove it.
+luminousglassart You are super welcome. You can find the Crystalmaster here: www.hisglassworks.com/shop/machinery/flat-grinders/small-grinders/12-inch-crystalmaster-pro-110v-60hz-variable-speed-grinder-html.html Let me know if you have any questions on it.
Hello. I love your videos. I'm trying to give a glossy, shiny finish to bottle edges. Which white oxide are you using to polish the glass after the silicon carbide step? Will that work for me? Thanks.
We have a number of cerium oxides to choose from and our two favorites are Cer-Optik and Ceri-Tec. Both work very well with a felt pad in a Rociprolap for a final polish and can be purchased direct from our website at hisglassworks dot com.
POR FAVOR EL AUD ES EL QUE SE USA IO EN ESPAÑOL, ES FANTASTICO EL METODO, EL CARBURO DE CILICIO ES EL QUE SE USA PARA SOLDADURA AUTOGENA? DE QUE MATERIAL ES EL PAÑO BLANCO, MUCHISIMAS GRACIASSSSS...!!!! ATTE ROBERTO
I learned to polish optical glass thanks to your video - I’ll always be thankful for your help!
This makes my day. Awesome
Cleaning the pan with the water/shop vac would also be a great idea for winter-time cleaning.
Definitely!
Very interesting .I like your glass processing machine...Thanks
If you ever have any questions on the Rociprolaps, we would be happy to help.
www.hisglassworks.com/shop/machinery/flat-grinders/rociprolaps.html
@Theglassforge We make our dividers out of Lexan, It's like plexiglass that you can bend and form. Fun stuff.
Buenísimo, sos un Geniooo Muchachooo,lastima no vivis en Argentinaaaaaaa
Great video. Can the divider that you show in the polishing step be used in the initial grinding step. I have several small pieces - 2x2x2 and 3x2x2 and would like to do several at the same time. Thanks
Of course it can. You might want to make a divider for each grit though to avoid any cross contamination issues.
How well do these work with steel and cast iron? I assume just as good but am only seeing glass videos. Thanks! Your vid is high quality
We have never tried this with steel or cast iron. Only with glass and stone. I'm just not sure how well it would perform on those.
@@hisglassworksinc Thanks for the speedy reply on a 10yo vid! The manufacturer does state it works with metal well, was just asking if you had any real world experience. I'll keep asking around.
@@mattedger Sounds good. Hope you find what you need, information wise.
A very good, informative and useful video, thank you. I know you don't supply the glass blocks shown in this and other videos so can you give me some suggestions as to where I may be able to obtain them?
+splink143 I would contact Gaffer Glass for information on glass block.
+hisglassworksinc Thank you
@szaki The Rociprolaps are available in pan sizes up to 36 inches, so you can put a piece up to about 32 inches into that pan and it will work well.
Yes, the smaller Rociprolaps in the 20 inch size start at about $1900.00 without shipping or crating. They are also available in 24 inch, 30 inch, and 36 inch from our website.
in this video, the machine you use (that we see) is 24 inches ?
Enjoyed the video, however, I'm kind of new to having a desire to get into glass as a hobby. What is it exactly that you were going to use that glass block for? It turned out very nice, but what is the final piece going to be? Thanks.
@loriglass I don't think it would make a lot of difference. The aluminum oxide will break down faster, but that shouldn't be an issue at all. We just used silicon carbide because it's what we have on hand. Either would work just fine though.
This actually becomes the center of a larger piece. It has dichroic glass laminated between pieces of lead crystal and then is inserted into a larger spherical shape.
What's the largest part can be polished or ground this way?
is there larger machine available?
Would a rociprolap or vibralap be able to polish something small like milli chips. I’m thinking of using hockey pucks to weigh down the chips, but wasn’t sure if that would be enough weight.
As long as there is enough weight on them it should work. I would work up a jig to put multiple pieces at one time (cast in plaster or wax or something like that with extra weights).
I'm researching flat laps and one reason I like the reciprolap is that you don't need a constant water supply. My one concern is how much does the wheel weigh? I'm a 68 year old woman and can easily pick up around 20 pounds, but this looks heavier. Thanks.
+luminousglassart A 24 inch Rociprolap pan weighs about 45 pounds. I would definitely say it is easier to handle with two people if you need to remove it.
Thank you! I think I have to go with the crystalmaster. I appreciate you guys very much.
+luminousglassart You are super welcome. You can find the Crystalmaster here:
www.hisglassworks.com/shop/machinery/flat-grinders/small-grinders/12-inch-crystalmaster-pro-110v-60hz-variable-speed-grinder-html.html
Let me know if you have any questions on it.
Hello. I love your videos. I'm trying to give a glossy, shiny finish to bottle edges. Which white oxide are you using to polish the glass after the silicon carbide step? Will that work for me? Thanks.
We have a number of cerium oxides to choose from and our two favorites are Cer-Optik and Ceri-Tec. Both work very well with a felt pad in a Rociprolap for a final polish and can be purchased direct from our website at hisglassworks dot com.
Lo siento mucho, pero no tenemos el audio en español. Gracias por su interés.
POR FAVOR EL AUD ES EL QUE SE USA IO EN ESPAÑOL, ES FANTASTICO EL METODO, EL CARBURO DE CILICIO ES EL QUE SE USA PARA SOLDADURA AUTOGENA? DE QUE MATERIAL ES EL PAÑO BLANCO, MUCHISIMAS GRACIASSSSS...!!!! ATTE ROBERTO
So this thing costs about $2,000.00+, without shipping, right? Thanks:)
pOR FAVOR COMO HAGO PARA ESCUCHAR EL AUDIO EN ESPAÑOL, ATTE ROBERTO
HAhaha.... Down on the Shaft, Resting on the Balls.... #%$@! 1:23
resimprolap
Flying car