PIPE COATING l OILANDGAS l ARAMCOREFINERY l SAUDIARABIA l SANDBLASTING
Вставка
- Опубліковано 23 тра 2021
- ✅ Subscribe to our Channel to learn more about the top Technologies: bit.ly/3Cypbn1
▶️ Watch Trending Videos
1. • GARNET l SILICA FREE l... : Garnet blast cleaning
2. • ABRASIVE BLAST CLEANIN... :Coal Slag blasting
3. • GLASS BEADS BLASTING l... :Glassbeads blast cleaning
وحة الخالية من الهواء
#PIPE COATING #PAINTING #CORROSION
Oil and gas asset owners are increasingly looking for longer performance from their corrosion protection, but also want to reduce their overall capital expenditure budget in all areas.
Protective coatings offer a viable solution to many corrosion challenges found in the oil and gas industry, and currently millions of litres of paints are used to protect these assets globally each year. However, the protective coatings industry has been faced with many challenges in recent years and has had to wrestle with:
How to reduce impact on project schedules brought about by late-stage painting activities
How to minimise delays due to painting rework and in-service failures
How to maximise the cost effectiveness of time spent on painting activities #स्टील #पाइपपेंटिंग #पेंटर जॉब
Good and quality work
Good 📸
Thanks
Wander full work
Thank you for your support
DFT RANGE 65 UP TO 105 RIGHT BRO
Good
Thanks
Nice one
Thanks for watching
saludos DESDE lima Perú me gustaría hacer un curso de pintura industrial tienen sede en peru
3 passes in a uniform slow speed can attain required DFT for In organic Zinc sylicate..The powder generating while spraying must remove from adjacent areas prior to continue spraying.For 12;O clock surface provide a hope up to the sprayer.
Negative, organic zinc silicate when dry will have a dft value of almost 1/3 of the value it had when wet.
مرحبا هل يمكني طلاء خزان وقود كاز من الداخل بالدهان
APCS - 2D
1 Type of Coating
Epoxy Coating System for Interior of Steel Aviation Fuel Storage Tanks and Piping.
2 General Data
2.1 Typical Use
Immersion service for aviation fuels, turbine fuels and kerosene
2.2 Service Condition Limitations
Maximum Service Temperature: 90°C
2.3 Purchase Specification(s): MIL-C-4556E, QPL-4556E
2.4 SAP Material Numbers (SAMS Stock Numbers)
2.4.1 Primer (Yellow): 1000194354 (09-612-316)
2.4.2 Topcoat (White): 1000194357 (09-612-317)
2.4.3 Thinner: 1000198458 (09-738-290)
3 Surface Preparation Requirements
3.1 Minimum Cleanliness Level
3.1.1 Initial: Sa 3 (SSPC-SP5)
3.1.2 Touch-up: Sa 3 (SSPC-SP5) Refer to repair procedure in SAES-H-100 for areas less than0.1 m²
I m spray painter
ua-cam.com/users/shorts8zf8Y5IpWrU?feature=share
Hi youu are doing a good job, I am a painter , how do I apply
Please find the suitable job through indeed.com
Do you have any job for a blasting and coating Inspector? I want to switch my job having a two years extensive experience of coating and as a paint Inspector. Kindly share the details if have any vacancy for a QC. Thanks!
Dear Mr.Imran ,Currently we don't have requirement
Do you have any vacancy for coating inspector
Can I get your contact number
@@DILSHADGT No vacancy now.please visit www.scsksa.com
Protecting machined surface is the big burden.
@johnjacob , You are right
Please ask costing name
Please give your feedback again
I am paintar erleash ka
Thank you for your valuable comment💬, Pls apply through indeed.com
Microns 30 or 40 this painting this method ...spray is not even.
Thank you for your opinion
050 micrones
Thank you Mr. samir for your feedback
What is the TIP number of the spray gun
. 0.48 - 0.64 mm (= 0.019 - 0.025 in) (Since the paint product is Sigmazinc 158)
Have job vacancy
not now. www.scsksa.com
Apana nambar bheje bat katan hai
If you are looking for job, apply through indeed.com
ua-cam.com/users/shorts8zf8Y5IpWrU?si=ccN_KnuYGnUHtPD8