Hi! very cool project. Which step up rings exactly do you have under the hood? I count 4 step up rings. You start with a 49mm and work your way up to 72mm, but which ones are they exactly? Could it be something like 49 to 55, then 55 to 62 then 62 to 72 and then finally the hood on top?
I see you have a few SMC Takumar rehousing designs. How much would it cost for you to make a version that complimented them but for the 28mm f3.5 lens?
감사합니다. FD 렌즈가 마음에 드셔야할텐데요 ^^; 자이스 (콘탁스) 단 렌즈도 나름의 매력이 있는데, 렌즈 세트 구성으로 갖추기가 쉽지 않네요! FD 렌즈에 대한 만족감이 크고 그리고 제가 직접 사용하는 렌즈에 대한 하우징 업그레이드 작업이기 떄문에 (필요 이상의 많은 렌즈를 진열장에 쌓아두는 것을 목적으로 하지 않아서) 아마도 추가하지는 않을 듯합니다.
Oops. Perhaps the FD to EF adapter has obvious limitations in making practical objects with 3D printing. Not easy! Thanks for the comments by the way! :D
After searching the photos, I found that the difference in appearance between the two lenses is quite large, so I don't think they will fit well just by adjusting the internal diameter.
The two types of Super-Takumar 50mm 1.4 lenses look similar but have different focus ring sizes. Unfortunately, the outer housing of the Takumar 7-element lens is a bit larger, so I don't think it would fit completely well.
![[DIY] Canon FD 50mm f1.4 S.S.C Vintage still lens to CINE Rehousing - "K35 CINE primes Homage"](/img/n.gif)
I love this channel! Love what you do! Thank you!
Hi! very cool project.
Which step up rings exactly do you have under the hood? I count 4 step up rings. You start with a 49mm and work your way up to 72mm, but which ones are they exactly?
Could it be something like 49 to 55, then 55 to 62 then 62 to 72 and then finally the hood on top?
Pretty great as always!
Wow.. My most favorite lens 😊😊
I see you have a few SMC Takumar rehousing designs. How much would it cost for you to make a version that complimented them but for the 28mm f3.5 lens?
또 하나의 작품이군요 ㅎㅎ 산들님 덕분에 짜이쯔 FD 두 종류 렌즈 알아보다가 FD로 정했습니다 ㅎㅎ 혹 차후에 짜이쯔는 계획이 있으신가 모르겠습니다. 늘 잘 보고 있습니다 고맙습니다.
감사합니다. FD 렌즈가 마음에 드셔야할텐데요 ^^; 자이스 (콘탁스) 단 렌즈도 나름의 매력이 있는데, 렌즈 세트 구성으로 갖추기가 쉽지 않네요! FD 렌즈에 대한 만족감이 크고 그리고 제가 직접 사용하는 렌즈에 대한 하우징 업그레이드 작업이기 떄문에 (필요 이상의 많은 렌즈를 진열장에 쌓아두는 것을 목적으로 하지 않아서) 아마도 추가하지는 않을 듯합니다.
Still waiting for that ef to fd adapter :P. Great stuff by the way :)
Oops. Perhaps the FD to EF adapter has obvious limitations in making practical objects with 3D printing. Not easy! Thanks for the comments by the way! :D
@@MountainBreezeStudio I guess that it's not easy but you are a genius so i guess you are able to do it :D
Can this also be used for the Panasonic Vario 14-42mm lens?
Is m42 to ef needed. Can using stock m42 mount ?
I need ziss ZE 50 f1.4
AWESOME !!!
Hi there, i have the same lens :) can i buy this housing from you ?
Apreciate you ! Would u make a super takumar 28mm 3.5 so we can mention you in our prayers
Sorry! Unfortunately I don't have that lens so I can't try it.
@@MountainBreezeStudio do you live in Seoul?
Yes. In a strict sense, I live in a city bordering Seoul.
@MountainBreezeStudio i come to inchon quite often, if u want i can bring you the 28mm to model it
After searching the photos, I found that the difference in appearance between the two lenses is quite large, so I don't think they will fit well just by adjusting the internal diameter.
are the specs the same for the SMC Takumar 50 f1.4 (7-element)?
Unfortunately the 7 element lenses are just a little fatter so they won't fit. :)
Ah! SMC? It won't fit with a high probability.
hi, which sizes of step-up rings did you use to get the correct height and flare?
I used 49-52mm, 52-55mm, 55-58mm 58-62mm 62-67mm 67-72mm step up ring + 72mm (front 95mm filter thread) round metal hood.
Hi what material are you using for 3d printing ?
Hi, PLA filament was used. You could also use ABS or PTEG filament.
@@MountainBreezeStudio thanks ! Keep doing good stuff like this ! Your fans from malaysia 🙌🏻
Where I can buy this setup for my Lens
Sorry. It's not for sale. Create your own using the shared STL files and 3D printer. :)
Will this work with the Super Multi-coated Takumar 50mm f/1.4 8-element as well? Are they the same?
The shape of the lens is slightly different, so it probably won't fit.
@@MountainBreezeStudio do you think with your design and slight tweaking like resizing of length, diameter, etc. it will work?
Hot damn yes.
Hello. Can I apply it in 7 elements?
The two types of Super-Takumar 50mm 1.4 lenses look similar but have different focus ring sizes. Unfortunately, the outer housing of the Takumar 7-element lens is a bit larger, so I don't think it would fit completely well.
@@MountainBreezeStudio thank you for the explanation. By the way I am happy watch your channel. Maybe next time you can make 7 elements rehouse.
안녕하세요. 예전 필름 카메라 어깨 패드인데 지금 생산을 안해서 혹시 이런 것도 만들 수 있을까요?
반갑습니다. 어떤 물건을 말씀하시는지 잘 모르겠어요. ^^;
@@MountainBreezeStudio 안녕하세요 혹시 메일주소 좀 알려주실 수 있으실까요? 제가 제품 이미지랑 함께 메일 드리겠습니다.
@@FILMSTBY 아! 상업적 목적으로 운영하는 것이 아니라서 제작 의뢰는 받지 않습니다. 죄송합니다!