How to Replace Lower Rearward Control Arm with Ball Joint 2003-2007 Infiniti G35
Вставка
- Опубліковано 9 лют 2025
- Buy Now!
New Control Arm with Ball Joint from 1AAuto.com trq.video/ia-1...
This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2003-2007 Infiniti G35. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
This repair was done on a 2005 INFINITI G35 X 3.5L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2003 INFINITI G35
2004 INFINITI G35
2005 INFINITI G35
2006 INFINITI G35
2007 INFINITI G35
Tools you will need:
• Pry Bar trq.video/oWn-...
• 10mm Socket trq.video/obg2...
• 14mm Socket trq.video/obBD...
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 22mm Socket trq.video/opo-...
• 36mm Socket trq.video/ob5-...
• Pickle Fork
• Pliers
• 1/2 Inch Impact Gun trq.video/out-...
• 3/8 Inch Impact Gun
• Ratchet trq.video/obGi...
• Torque Wrench trq.video/oaKi...
• Cotter Pin
• Gloves trq.video/oahT...
• Safety Glasses
• Floor Jack trq.video/o9G-...
• Hammer
• Jack Stands trq.video/oWV-...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Infiniti G35 3rd Generation 2003-07: • Infiniti G35 3rd Gener...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
These videos are very helpful but the random things like not adding a self tapping screw to the brake line mount, I swear the hub and wheel bearing got changed without it being said, then after all that you re use a old cotter pin 😮
So I gotta take everything off just to do that?
Very helpful video! I can't get the old shim/spacer off of one of the old arms. Tried everything. Will part 40173-AC500 work as a replacement? Or know what will work? Thank you.
nice job.
Dude what??? Mine doesn’t just go in like that it’s like 3-4 inches away