WMF CNC Plasma Rotary Tube Cutter w/ Sheetcam Rotary Plugin
Вставка
- Опубліковано 24 січ 2025
- A demonstration of my shop built CNC Plasma/Scribe table with the Rotary Tube Cutter Atachment.
The entire CNC table and Rotary axis was designed, engineered and built by Brian Wolfe at Wolfes Metal Fabrication. All working parts of the table are in the gantry, so table size can be easily extended by welding up a larger table and installing longer rails.
The Rotary Cutting chuck was designed to be installed on the backside of the table completely out of the way when not in use and only the installation of the tube to be cut and a sliding support slipped on the support rail with a thumbscrew to secure it is all that is required to cut tube. No extra bolt ons, moving the torch etc. is required.
It is driven via a Nema 23 Stepper motor and a G203V Geckodrive on a 50Volt powersupply.
I promised Les from Sheetcam that I would make a video demonstrating it and showing some drawing and setup after he finished helping me fine tune the post processor to work as I wanted for my table with the scribe.
That table cuts fast and nice.
Wow, I have got to say that is one of the best shop built ideas I have seen yet. I have been trying to figure out how to do this and you have it all figured out. Once I get my table up and running I will re-watch this so I can make my own. Please keep up the great work and projects.
Thanks, I greatly appreciate it. I have actually had more interest/response with this (including phone calls) than i expected. I will probably be trying to get atleast a couple units or a small production run of them made in nema 23 and nema 34 when i get a chance,
hi what is mach3 vesion
fantastic walkthrough
Good machine. Love the bottle opener :D
I do not have plans available, but I do now have the rotary chuck attachments available to purchase on my website. www.wolfesmetalfabrication.com
Nice 👍
Hi, good machine !! Do you use THC for the square tubes?
+Tornería Roman Yes the THC is also active during all tubes, but probably wouldn't have to be, it just a little added insurance to get proper cut height. The THC is not what controls the z height for the corners though, it is programmed in.
THC is programmed in? It has special inputs to connect Plasmacutter? Or I have to have THC controller separately?
wonder how one would do that , is there a square tube option in the program that you tell the side size of the square tube and it adapts the g code to match , the 4 jaw chuck makes it clear where those corners are offcourse
never mind you explaned it in the video you fold the tube out on the program and make the one axis rotateable , still makes ajusting the height a bit of a dark art
i think if someone was to make a add on g code program made for cutting square tube it be a lot eazier to do
What software do you use to control this? And what software to create G code?
Mach 3
This is awesome! Now I am confused if I want breakboard with direct mach 3 support and work from PC or use this thing. This looks like an elegant solution. You create your code on a PC in clean office. You do not need a PC in your workhouse. Then you just bring SSD there and run the machine. Also it looks like with this controller my CNC would look more industrial like.
On the other hand Mach 3 has more features and someday I might be sorry I did not use it and PC directly to CNC.
good job, I have a big question
as set rotary plasma from a comiezo ......... ? because I have license
Thank you.............
Not sure what you are asking....
could you please give me 4 axis pipe cutting plugins for sheetcam.?
Hi, with sheetcam rotary plugin u can cut squared tubes????
It cost only 60 USD as i could see on their website.
usted lo puede vender o decirme donde
That's great! I need to make one.
What controlcard you use may i know?
привет поделись ссылкой на программу с поворотной осью
Is it a homemade. Plasma table ?
if i want to purchase then from where i can buy?
you can see www.wolfesmetalfabrication.com and/or contact us through our site.
How much for one of these bottle openers? I want one! :)
LOL, if you are serious, send me your contact info / email. sales@wolfesmetalfabrication.com
In raw steel or????
They are the last thing on my to do list, and i actually need to modify it abit to be a good bottle opener, but i could possibly cut you 1 (pricey per piece) or a handful if you had use for multiples (less costly per piece), if you are not in an extreme rush to get it/them.
LOL your "LOL" gave me some doubt but email sent.
dmak2
Sorry, it was not meant to, i was just messing around, and never figured anyone would want any of these, but they have actually brought more interest than i thought. That was the reason for the LOL.
Wolfesmetalfab It's a quirky, useful and rare object. Produced in a brutal, yet cunning way. I like it. I assume the bottle opener part is tested and works well? :)
dmak2 :) it will be tested and adjusted before any are made for sale. It was actually just a coincidence, as it was just an opening in the back of the chair at first until the thought came across..."Hey, thats a cool bottle opener"
В какой программе вы делаете чертежи для резки?
Any CAD program and then the CAM program i use is called Sheetcam. Любая программа CAD, а затем и программа CAM, которую я использую, называется Sheetcam.
Hello! I need a machine like this. Can you sell this type of machine?
Ok
I was buy licence key rotary pipe but he run just axes xyza but I want to run axis xyzb ,because my I have torch rotary
just replace a for b in your settings and you can run it
hi MR. Brian
may i know about your this project , i am interested to make like this.....
Sweet Ali Information is available in my videos and on my website. If you are interested in purchasing the rotary attachment contact me via email which can be found on our website.
I am a student from vietnamses, can you give me rotary plasma installation
please!
can you please send to mee the rotary plugin liscnse key ?
plz
No, but if you are interested, you can purchase it from Les at Sheetcam. He has worked very hard making the program, it would be proper to pay him for his time.
ha iknew that :D but i have to get it iam poor
usted me lo puede vender??
Hi
Can you help me
Alg Cnc what do you mean can I help you? Did you have a specific question? I can help you for our hourly rate or if you are interested in buying a machine yes I can help you.