Damn. I can't believe my luck. Just bought a Gen 3 LS 6.0 to put in my 97 OBS and was wondering how the heck I will wire the two together. I went to your channel and this was the first vid I clicked on. Questions Answered! You are the LS Wiring Maven for sure! And as far as wiring videos go, you are the Master! Thanks so much for your efforts. You deserve way more exposure than you get.
It's good to see you are still in to it! Your website helped me 5 years ago swap a 93 LT1 in to my 90 GMT400. Still got it and it's a great truck! Thank you for sharing everything you do.
I’m in the process of trying to do a swap to my truck. Is this a service you provide? I’ve read almost all of the info you have on the website but just figured I ask if we can get this done by a pro?
I’m doing this right now. I’m blending the two harnesses. My plan is to keep the OBS PNP switch and connections. My question is, does my 2006 PCM need to have a signal from the PNP? Comparing the two wiring diagrams, the OBS range switch goes to the cluster and the 2006 Tahoe PNP goes to the PCM for logic. Thank you in advance.
I know its been years since this was posted. I came across this video when trying to figure out something on my 1998 silverado. I dont know if you will remember at this point. I am hoping you might. At 24 seconds, you can see a brown wire with the white connector on the end of it. I have this on my truck and it is not connected to anything. This is the first time I have ever noticed it. I am wondering where it came disconnected from. I have searched and cannot find a spot for it to plug in. I have tested it and its live wire. I know it comes out of the bulkhead but I cannot find any info as to where it plugs in.
How did you tap into the wires on the neutral safety switch? Range signals from the 98 come from the firewall have to get mated with the range signals from the Ls computer?
Hello I’m swapping my 94 Silverado. I’m installing 2003 Tahoe drive by wire 5.3 but can’t find the pin out and how to merge the 94 to the 03 harness can you point me in the right direction
I know this an old video now, but my question is does this modified factory 5.7 harness get married to an unmolested 5.3 harness? Or, is it married to a stand-alone 5.3 harness?
does this info chnage if im using the ls stock fuse box? i had a running suburban removed everyhting and i have a running 1996 chvey silverado with a 5.7 i want to keep ac from the truck i already have the ict billet brackets for the ac the stay stock
I'm doing a swap on a 96 OBS chevy, can you use the original fuse block instead of adding one. The 96 has ENG and ECM 20A fuses for key hot. I was thinking of doing this: 20A ECM I : Injectors , PCM (original 96 setup) 20A ENG I : Coils, O2 sensors, MAF, TAC and I believe it has a dedicated Trans fuse coming from the under-dash fuse block. Fuel pump already has dedicated fuse and relay. Any input?
I’m doing a 96 c1500 with a 5.3 and a 96 4l60e transmission that came off the original 4.3 that was in the truck. I’ve got the 5.3 married to the 96 4l60e trans. Now I need to do the wiring, any info/help would surly be grateful. Will this work for my setup?
Jacob Snowden no I did not. I decided to go a different direction. I bought a truck that has a 5.7 in it and now I’m working on that. Good luck to you. I love LS engines, but their a pain in the ass when it comes to swapping them.
Brian Hess sucks that you gave up on the swap man ! What all did you need to “marry” the 5.3 into the stock 4.3 4l60e tranny ? And what else do I need in general for the swap ? Obviously motor mounts, some new headers but what else
Do you do this for other people? I have a 96 c1500 4.3 2wd that i ls swapped, but I can not do wiring ..I have everything off body - motors, just need to find someone to do work that is legit..if you know someone or do this stuff let me know??
Mr Chappy bro what did you need for the swap ??? I’m currently trying to swap a 5.3 gen 3 into my 96 4.3 like you.. could you tell me what you need to replace or buy new for the swap to be able to be completed ?
thanks for the resource... Have you done anything to retain the "flex fuel" mode on these? doing a slightly hyped up build and would really like to retain the "Flex Fuel" sensor for boosted performance changes.. hitting something less than say E80 to turn the motor down?
Ok so I want to do this to my 98 z71 4x4 but it's my DD and can't have it down for a long time so my question is can I get a harness out of a 2 wheel drive or does it have to be out of a 4x4 and does the ls harness have to come out of a 4x4 or can I use a 2 wheel drive harness and ecu
Kno it's a old video but I'm looking for help trying to see if swapping a 2001 4.3 0411 ecm and harness over to 98 gmc sierra vortec 4.3 blackbox harness is possible. Need tuning options.
Do you have a pin out of the big plug that bolts on top fire wall behind the fuse box under the brake booster to right a little ? I cut few extra wires and can’t find the temp gauge wire or volts or fuel level , I managed to find rpm and oil pressure, and I put the 2 vss wires together from 97 harness but can’t get gauge to read
Friend, I remove my 4.3 from 96 gmc Sierra. Now I'm going with FiTech system (like holley), can you strip my harness in order to delete the un use stuff?
Hi I've been reading from your online website. My project I have an 02' Tahoe 5.3L and I swapped a 04' 5.3L inside and converted the cable to electric pedal. I'm having issues with no start or anything. Am I missing something? The computer came out of an 05 Tahoe but rockauto has the 03' - 05' Tahoe 5.3L computers as interchangeable.
Everyone has a printout for removing the wires on their swap I cant find the info for my 2007 chev 3500 LQ4 engine i have all the wiring since i had the donor truck Can you please help me????
do you have the pinout for the passenger side of the firewall? also i have updated pdf harnesses in color if you'd like them, i'm putting a lm7 in my 97 4.3 truck and i'm having some wires from the passenger side of the firewall that i need to figure out where to run. i have a brown wire and the c100 connector has it labeled as fused ignition output type iii, is that just a key on power wire?
My 96 4.3/4L60e PCM has 5 connectors! I’m ready to start this swap but can’t find any info on the “5th” connector. It’s the smaller one that plugs into the middle of the ECM
just did the 411 swap on my 2000 s10 everything good but my speedo dont work and wont shift gears, any help much appreciated. used a 2001 s10 411 pcm for my 2000 also using 01 motor.
going to have to buy a factory GM service manual. Those pinouts ARE NOT on electronic services such as alldata or mitchell on demand. If you pay attention taking apart the 98 harness, you can label the pink circuits and what you cut from the splices.
There are no fan wires in 1998 trucks unless you had a big block. The PCM pinout on my site shows where you can add a pin to the 98 pcm for 1 fan control. Use the PCM pinouts to locate the wire to the fuel pump. I talk about the starter wire in this video. It's the heavy gauge purple wire.
ADAM ROHLFS Yes, I ended up doing what he did in this video. The only thing I haven't figured out is the AC and the fuel gauge. Using the 03+ green/blue pcm doesn't produce the correct signals. I'll probably end up putting the original pcm under the dash and wire it up for the AC and fuel gauge.
Hey man i just followed this but i have a harness from a 5.7 vortec, i have one more connector that i can’t seem to figure out what it is, anyway i can send you a personal message with a picture and maybe you can help me
I would like to see a video or better photos of the way the plugs are hooked up! My tahoe does not have cruise control. any photos will help thank you THEOLDHOODLUM.....
Hey! I'm struggling to find the PWM fuel gauge pin in the 0411 pinout, any hints as to what pin on that harness to either the blue or red? or where does it go if not into the ecu? Thanks!!
I have a question so the neutral safety switch on the obs can I use the same 4 wires and connect em on the 5.3 ls neutral safety switch for the back up lamps and so forth?!
So what I learned from this video is that I just need to pay you to merge my harnesses !!
of just but the holly terminator
Lol right? I need my harness redone any recommendations?
Damn. I can't believe my luck. Just bought a Gen 3 LS 6.0 to put in my 97 OBS and was wondering how the heck I will wire the two together. I went to your channel and this was the first vid I clicked on. Questions Answered! You are the LS Wiring Maven for sure! And as far as wiring videos go, you are the Master! Thanks so much for your efforts. You deserve way more exposure than you get.
It's good to see you are still in to it! Your website helped me 5 years ago swap a 93 LT1 in to my 90 GMT400. Still got it and it's a great truck! Thank you for sharing everything you do.
What wires in the ls harness do you hook the 20 wires that come from the 98 harness to ?
Thanks for all your support Brandon
Lt1swap.com i say is the godfather who helped 1000s get started
Question? Might be dumb one but the factory obs computer or wiring is not needed at all unless you want the factory gauges to work?
Awesome video! Is there no way to use only the LS pcm to control the engine and abs? Say im swapping a 5.3 into a 98?
You're the man !!! Thank you very much for all this information on LS wiring swaps.
I’m in the process of trying to do a swap to my truck. Is this a service you provide? I’ve read almost all of the info you have on the website but just figured I ask if we can get this done by a pro?
Man, thank god for the holley terminator x.
I wish you made this video 3 years ago. but Thank you for the Information you help with for the LS swap enthusiast community.
I’m doing this right now. I’m blending the two harnesses. My plan is to keep the OBS PNP switch and connections. My question is, does my 2006 PCM need to have a signal from the PNP? Comparing the two wiring diagrams, the OBS range switch goes to the cluster and the 2006 Tahoe PNP goes to the PCM for logic. Thank you in advance.
I know its been years since this was posted. I came across this video when trying to figure out something on my 1998 silverado. I dont know if you will remember at this point. I am hoping you might. At 24 seconds, you can see a brown wire with the white connector on the end of it. I have this on my truck and it is not connected to anything. This is the first time I have ever noticed it. I am wondering where it came disconnected from. I have searched and cannot find a spot for it to plug in. I have tested it and its live wire. I know it comes out of the bulkhead but I cannot find any info as to where it plugs in.
How did you tap into the wires on the neutral safety switch? Range signals from the 98 come from the firewall have to get mated with the range signals from the Ls computer?
Hello I’m swapping my 94 Silverado. I’m installing 2003 Tahoe drive by wire 5.3 but can’t find the pin out and how to merge the 94 to the 03 harness can you point me in the right direction
I know this an old video now, but my question is does this modified factory 5.7 harness get married to an unmolested 5.3 harness? Or, is it married to a stand-alone 5.3 harness?
does this info chnage if im using the ls stock fuse box? i had a running suburban removed everyhting and i have a running 1996 chvey silverado with a 5.7 i want to keep ac from the truck i already have the ict billet brackets for the ac the stay stock
I'm doing a swap on a 96 OBS chevy, can you use the original fuse block instead of adding one. The 96 has ENG and ECM 20A fuses for key hot.
I was thinking of doing this:
20A ECM I : Injectors , PCM (original 96 setup)
20A ENG I : Coils, O2 sensors, MAF, TAC
and I believe it has a dedicated Trans fuse coming from the under-dash fuse block.
Fuel pump already has dedicated fuse and relay.
Any input?
could you make a video of how you combined the harness with the connectors
That’s where I’m stuck at too man! Any update??
That’s where I’m confused at now too 🤷♂️
I second this
Same here
Any luck
I’m doing a 96 c1500 with a 5.3 and a 96 4l60e transmission that came off the original 4.3 that was in the truck. I’ve got the 5.3 married to the 96 4l60e trans. Now I need to do the wiring, any info/help would surly be grateful. Will this work for my setup?
Brian Hess did you get this figured out? Currently in same situation
Jacob Snowden no I did not. I decided to go a different direction. I bought a truck that has a 5.7 in it and now I’m working on that. Good luck to you. I love LS engines, but their a pain in the ass when it comes to swapping them.
Brian Hess what year is the new truck?
Jacob Snowden it’s not new, it’s a 95 Chevy K1500 with an original GM 5.7 in it before GM sold the 5.7 blueprints to Toyota.
Brian Hess sucks that you gave up on the swap man ! What all did you need to “marry” the 5.3 into the stock 4.3 4l60e tranny ? And what else do I need in general for the swap ? Obviously motor mounts, some new headers but what else
Do you do this for other people? I have a 96 c1500 4.3 2wd that i ls swapped, but I can not do wiring ..I have everything off body - motors, just need to find someone to do work that is legit..if you know someone or do this stuff let me know??
Did you ever find somebody
Mr Chappy bro what did you need for the swap ??? I’m currently trying to swap a 5.3 gen 3 into my 96 4.3 like you.. could you tell me what you need to replace or buy new for the swap to be able to be completed ?
Awesome Video !!!!!! I have a 1996 Yukon 4wd that I plan on Converting to LS Engine someday
thanks for the resource... Have you done anything to retain the "flex fuel" mode on these? doing a slightly hyped up build and would really like to retain the "Flex Fuel" sensor for boosted performance changes.. hitting something less than say E80 to turn the motor down?
Do you have pin diagram for the c2 connector for a 99-02 truck
Any detail on how to merge them? How to wire the plugs and how they plug into the ls harness
Ok so I want to do this to my 98 z71 4x4 but it's my DD and can't have it down for a long time so my question is can I get a harness out of a 2 wheel drive or does it have to be out of a 4x4 and does the ls harness have to come out of a 4x4 or can I use a 2 wheel drive harness and ecu
Kno it's a old video but I'm looking for help trying to see if swapping a 2001 4.3 0411 ecm and harness over to 98 gmc sierra vortec 4.3 blackbox harness is possible. Need tuning options.
Is it a stand alone harness for the LS side?
Hello. Do you know what harness i need to run a 6.0 ls and a 6l80 on a 92 obs?
By chance do you sell pre built harness like this ?
There is a LSX Harness guy. Just like Brendan does programming. He does harnesses.
How much for this integrated wiring harness???
Are you going to do any gen 4 stuff? Im confused about maf sensor
Engine and hanes 2010 lc9 silverado
Did you ever find the part number to those connectors you used to merge both harnesses
He reused the oem ones he cut off
Do you have a pin out of the big plug that bolts on top fire wall behind the fuse box under the brake booster to right a little ? I cut few extra wires and can’t find the temp gauge wire or volts or fuel level , I managed to find rpm and oil pressure, and I put the 2 vss wires together from 97 harness but can’t get gauge to read
Ok I'm missing something here. Where do I hook up the obs wires to the ls pcm pins? I can't find the pin out info am I just missing it?
17:00 show the bundle that connects to the LS harness. The pinout linked in description on my website shows location on PCM.
Very helpful info, thanks
You need to do a 5.3 Gen 4 rewire video you would get a ton of views/likes.
What about going from the 5.7 too an ls3?👀
What brand brackets was used on this 98 for the stock ac compressor?
Isn't that recirculation door pin repurposed for fan?
Do you know if a 95 s15 is basically the same process as this? I'm thinking about swapping a 4.8L and 4L60 into the s15 4x4, thanks!
Do you have the pin out for a 1992 GMC Yukon
Friend, I remove my 4.3 from 96 gmc Sierra. Now I'm going with FiTech system (like holley), can you strip my harness in order to delete the un use stuff?
How much would it Cost to get this done?
Does anyone know if theres just a plug n play harness for a 96 tahoe and putting in a 5.3 in it
Hi I've been reading from your online website. My project I have an 02' Tahoe 5.3L and I swapped a 04' 5.3L inside and converted the cable to electric pedal. I'm having issues with no start or anything. Am I missing something?
The computer came out of an 05 Tahoe but rockauto has the 03' - 05' Tahoe 5.3L computers as interchangeable.
Everyone has a printout for removing the wires on their swap I cant find the info for my 2007 chev 3500 LQ4 engine i have all the wiring since i had the donor truck Can you please help me????
Do you do wiring conversions for others?
would you ever sell this kind of moded harness?
I needed as well
do you have the pinout for the passenger side of the firewall? also i have updated pdf harnesses in color if you'd like them, i'm putting a lm7 in my 97 4.3 truck and i'm having some wires from the passenger side of the firewall that i need to figure out where to run. i have a brown wire and the c100 connector has it labeled as fused ignition output type iii, is that just a key on power wire?
i'm also trying to figure out oil pressure and coolant temp, other than that i'm done with my harness
i'm now realizing i goofed and deleted the factory oil pressure wiring and now need to readd it 🙃
Can I send you my harness and how much would it be
on a 98 obs, does this apply the same if using a aftermarket harness and ecu? i cant find any info on that.
Love this video
Have you done any interior wiring? Stripping it out and redoing it?
Will this work on a 93 Chevy Silverado
I have a 98 with a 4.3 want to put a5.3 do I still have to usr the original hardness or the one from the 5.3
My 96 4.3/4L60e PCM has 5 connectors! I’m ready to start this swap but can’t find any info on the “5th” connector. It’s the smaller one that plugs into the middle of the ECM
You'll find that that connector runs to no where.
i got the same shit
just did the 411 swap on my 2000 s10 everything good but my speedo dont work and wont shift gears, any help much appreciated. used a 2001 s10 411 pcm for my 2000 also using 01 motor.
Hey I could really use some help finding a diagram of the under hood fuse box as far as what wire is for what exactly
going to have to buy a factory GM service manual. Those pinouts ARE NOT on electronic services such as alldata or mitchell on demand. If you pay attention taking apart the 98 harness, you can label the pink circuits and what you cut from the splices.
LT1SWAP.COM I really need to know which wires are for which fan and I think fuel pump and start
There are no fan wires in 1998 trucks unless you had a big block. The PCM pinout on my site shows where you can add a pin to the 98 pcm for 1 fan control. Use the PCM pinouts to locate the wire to the fuel pump. I talk about the starter wire in this video. It's the heavy gauge purple wire.
@@LT1SWAPCOM @@ how much the 2004 tahoe pcm , ?? Delete vats?
Is there a place to buy the harness?
So nice and clean.
On the pwm fuel gauge output where dose that one go connected to the ls computer?
How much do you charge
So you just match what pin goes to both harness blue/red
will this video work for a 94 chevy 1500?
No it wont.your truck should have a standalone trans module.theres some diffrences with 96+
Can I run a Ly6 with gen 4 harness and 58x crank, 4x cam, gen 3 intake/throttle body/heads, 6l80 Transmission?
no, gen4 ecm will require gen4 throttle body. dbw only.
Ok thanks. Can that be a blue/green ecm?
Yes definitely want dbw whether gen 3 or 4
@@23steph13 no. blue/green is gen3. If you have a gen4, you use gen 4 computer, gen4 harness, gen 4 throttle...so on.
Ok Ok. Gotcha. E38, E40. Thanks
Would you be willing to adapt another 98 harness to an 04 5.3 harness? And if you would, what would you charge? Thanks.
no sorry...only did this one to document the process.
LT1SWAP.COM Thanks for your response. Would you be willing to recommend someone? I tried it myself, but I'm lost.
DID YOU GET YOUR HARNESS DONE YET ?
ADAM ROHLFS Yes, I ended up doing what he did in this video. The only thing I haven't figured out is the AC and the fuel gauge. Using the 03+ green/blue pcm doesn't produce the correct signals. I'll probably end up putting the original pcm under the dash and wire it up for the AC and fuel gauge.
Kaiser Mora I thought the gas gauge worked off the stock fuse block . Have any photos?
What would I need to do different for a 94?
Nothing difficult at all. Hundreds have worked with lt1swap.com to iron out the TBI GMT-400 wiring... bfy.tw/JRqW
i have a c5 wiring harness and id like to keep the emission censors for smog. this is for a swap for a gmc sierra.
Can you do this to an 8.1 vortec harness
Hey man i just followed this but i have a harness from a 5.7 vortec, i have one more connector that i can’t seem to figure out what it is, anyway i can send you a personal message with a picture and maybe you can help me
Found out it’s for the water heater control valve, This would probably be a thing i should keep if i want my heat to work still?
Do you have a pin out fit 88-94
Have u find them
Hlw sir.
Do have ss lumina 2004 5.7 all pcm diagram.
Does anyone sell a ready-made harness for this?
Is this the same for a 96 I need this exact thing done on my 1996 no keeping abs keeping a/c and using the 96 neutral safety switch
96 and 97 passenger fire wall plugs are different. more of a square connector
That's why I went carbed$
Frank da Tank cause you are scared of wiring
You don't have to do it yourself. The $1500 you spent to go carburetor. You could have bought one aftermarket or paid someone to do it
need help for a 1995
oook so I think i decided to just stick a 350 in my 98 gmc serria. lol
I would like to see a video or better photos of the way the plugs are hooked up! My tahoe does not have cruise control. any photos will help thank you THEOLDHOODLUM.....
THE PLUGS FROM THE 98 HARNESS MERGED TO THE FIVE/THREE HARNESS
I would rather drive my 98 tahoe off a cliff than do this. This must be the most complicated way to achieve a ls swap
Can u send me a copy of that
copy of what?
Sorry of the list to tap in to the 98 pcm
if you go to my website listed in the video description you will find the pinouts and other documents.
Thk u I appreciate
Do you have documents to marry a 5.3 harness to a 93 harness or is the 98 the same? Thank you in advance
Hey! I'm struggling to find the PWM fuel gauge pin in the 0411 pinout, any hints as to what pin on that harness to either the blue or red? or where does it go if not into the ecu?
Thanks!!
What a/c set up does he is he says it from a 95 1500 but what bracket is used
I have a question so the neutral safety switch on the obs can I use the same 4 wires and connect em on the 5.3 ls neutral safety switch for the back up lamps and so forth?!
If you are using the ls trans, then you get the 4 wires and either cut or splice the ls trans neutral safety switch plug to the old ones
Or you could also make it easier if you have a 96-98 4l60e and use the old neutral safety switch