2007 Ford Focus Rear Anti Sway Bar Links Replacement

[@averyquinn3894]

Thank you so much. Even the auto shops couldn't find the right part number.

[@mac4boys541]

Just a heads up guys, a 2007 USA Focus is NOT the same as a 2007 UK mk2 focus. USA didnt update to mk2 suspension for a couple more years. MK2s have different end links

[@imjeffvaderofficial]

Not only that; this is essentially an Mk1 facelift European Focus with a new badge.

[@ciarancallaghan8166]

Thanks fellas

[@SamiSaj-yj3nf]

"Baraka LLAH fik" in arabic. Mean GOD bless you.
Juste what i needed To sée for m'y Ford focus 1.8 TDDi. 2002.
Thanks very much. All good wishes for you and all pour bellioved people and neaboor

[@qualityrenos3739]

thanks for taking the time to post this. great job.

[@mrguitaramateure]

Thanks buddy, replaced my cars' one with ur help

[@thepilotF]

Thanks for your video, I could prepare to change mine as well.
It is recommended to prepare with disc grinder, in case you have so rusty and fixed screws I had. I had to cut down the top of the screws to be able to remove the old stabilizers.

[@MegaJamess123]

Thank you bud. Very helpful!

[@WalksandAll]

From the U.K. thank you Sir

[@alexramos5755]

Thanks ! Very helpful 🙏🏽

[@lizzihoward3090]

Thankyou for your detailed instructions. Ur a genius to b able to explain stuff like that to a dummy like me!!!

[@craiglydon8840]

Very helpfull could of just saved me a fortune 😁👍

[@felicitasnoemisendoa3511]

Gracias capo, me re sirvió.

[@orfeous]

I bought Volvo dealer OEM.. they were of plastic and not rubber as i have seen in other videos. Really expensive. 110 euro for two!
Looks really easy to replace. Mine is missing the bottom part on the left side. Looks like bolt head vanished :) so swaybar is inactive/disabled for now with lots of banging and clonking :)
No need to jack up the car or the tires? Swaybar not loaded?

[@ElLegit13]

you can raise the control arm a bit more if need space. and there will be enough space to put the top bushing to tighten down. I didn't need to hold the top nut to tighten it.

[@jeffferguson6820]

Will this video apply to a 2009 Ford Focus as well?

[@johncoady9237]

Hi would you know if rear sway bars are torsion bars my car failed test on coil spring/torsion bar cut/broken but I can't see anything obvious,,any advice be much appreciated

[@XJRBEN]

Thank you so much dude 😊

[@diveactive]

those old ones look like new to what I got to take off I need to hack saw mine off somehow.

[@djtopvibe8930]

I got 2007 focus mine don’t look like that

[@michaeldonaldllewellyn6294]

Thanks for the video A ratchet and socket on bottom would be easier

[@kanijosanchezsanchez3784]

I wouldn't have needed the elevator you used if you hadn't tightened the link on the other side.😅

[@luizdutra5894]

Ok 👍👌. Brasil 🇧🇷

[@citizendc9]

How did you know it had to be replaced?

[@tariqtaj9133]

You would normally hear a clunking noise every time you go over a pothole

[@szymongorczynski7621]

@@tariqtaj9133 And sometimes you'll even see that the bottom part has snapped off.

[@matthewalexandersayers4470]

Silicon grease on bolt as it's between bushings; keep it from squeaking.

[@zgabeartzaiftodie8615]

Copper grease is better

[@quotagious]

In The Uk Manual They Say To Torque Up To 11 Pounds

[@freddubose8539]

On the 2008 model focus,they don't have them. Just FYI

[@GARAGESXERO]

Weird that my focus is a 2005 and it’s a newer shape then this one

[@pdtech4524]

Yeah mine is 2006 and a mk2, I guess this one must have been a late registered mk1 sat in a showroom for a while?⚠️👍

[@matenagypal7322]

USA pal, Europe, UK and Australia got the mk1 up until late 2005, your 2005 must be a eraly mk2

[@andysmoore]

Do you have to use axle stands?

[@BT-lm4fd]

If you're getting under a car axle stands should ALWAYS be used 👍🏻

[@sweetvuvuzela4634]

For sure better safe then dead

[@yued9898]

Why don't you go buy a 16mm?

[@davidmcdougall7645]

When they break or when you hear nose from the rear end