Yes I’ve done that. I used the same stick on thermoliner as I did in my insulation vid! I’ve seen a video and a guy literally had condensation dripping out of his centre light 🙈
Hi - I have one of these to fit and I am very interested in the batten you used to secure the rear of the unit - what is it supported on? The install kit I got has a 150mm L-bracket to bond against the skin of the roof but the metal is very thin and I’m worried about it’s load bearing ability - your solution sounds much better!
Hi mate. Yeah I took the interior light out. Cut a piece of batten about 300 mm. Then fed it up in the cavity and used small L brackets on the centre piece and screeed through headliner in to the batten. It’s a bit two handed. But the whole headliner becomes one big support. Also people on UA-cam seem to take a bolt out of the d handle above door. Put a support bracket in. Then re bolt. But I’ve not even needed to do that 👍🏻
Hi. I’ve bought the door pillar covers. Any tips or ideas on how you fasted the boards on, with carpet first or afterwards. Any tips appreciated. Cheers Stew
Hi mate. I lined up the existing bulkhead fixings and drilled through the covers. Carpeted them separately out of place. Then fitted into it dusting holes using existing bolts 👍🏻
@@urbanarkoverland cheers for that. I was hoping to fit in one piece, but your way sounds easier. I knew I put the bolts in a safe place for a reason 😳 keep up the channel, love your information, very easy to sink in. Cheers Stew
@@urbanarkoverland job done today. Thanks for the tip wouldn’t have thought of it. Can’t show a pic. Lower half dark grey top half light grey. Cheers Stew
Hello, can you confirm the colour you got this made in please to match the van, in the vid you said dove grey but they don't have dove grey listed just wondered if you got the right colour mentioned in the vid? Cheers
What a smart system. Can’t wait for the next video
Jake Hufton thanks pal 👍🏻👍🏻👍🏻
Now that fits in a treat great job well done looking awesome.👍🍺🇬🇧🤘
Ah nice one pal. Can’t take all the credit as it is literally plug and play 👍🏻👍🏻
looks very smart mate.
Thank you so much.
Thank you for your support 👍🏻👍🏻
Bang on pal.
looking mint dude
Thanks pal 👍🏻
nice one dude your a legend
awesome, i like it. What do you think to take off the headliner part and insulate it ?
Yes I’ve done that. I used the same stick on thermoliner as I did in my insulation vid! I’ve seen a video and a guy literally had condensation dripping out of his centre light 🙈
👍🏻👍🏻
Hi - I have one of these to fit and I am very interested in the batten you used to secure the rear of the unit - what is it supported on? The install kit I got has a 150mm L-bracket to bond against the skin of the roof but the metal is very thin and I’m worried about it’s load bearing ability - your solution sounds much better!
Hi mate.
Yeah I took the interior light out. Cut a piece of batten about 300 mm. Then fed it up in the cavity and used small L brackets on the centre piece and screeed through headliner in to the batten. It’s a bit two handed. But the whole headliner becomes one big support. Also people on UA-cam seem to take a bolt out of the d handle above door. Put a support bracket in. Then re bolt. But I’ve not even needed to do that 👍🏻
@@urbanarkoverland cheers dude, appreciate it!
Hi. I’ve bought the door pillar covers. Any tips or ideas on how you fasted the boards on, with carpet first or afterwards. Any tips appreciated. Cheers Stew
Hi mate. I lined up the existing bulkhead fixings and drilled through the covers. Carpeted them separately out of place. Then fitted into it dusting holes using existing bolts 👍🏻
@@urbanarkoverland cheers for that. I was hoping to fit in one piece, but your way sounds easier. I knew I put the bolts in a safe place for a reason 😳 keep up the channel, love your information, very easy to sink in. Cheers Stew
@@stewartkendall2635 thanks matey 👍🏻👍🏻
@@urbanarkoverland job done today. Thanks for the tip wouldn’t have thought of it. Can’t show a pic. Lower half dark grey top half light grey. Cheers Stew
@@stewartkendall2635 find me on Instagram if you’re on there. 👍🏻
Hello, can you confirm the colour you got this made in please to match the van, in the vid you said dove grey but they don't have dove grey listed just wondered if you got the right colour mentioned in the vid? Cheers
8109 grey 👍🏻👍🏻
This is awesome, but it's now £380!!
Oh really. Dont think it was when I purchased.
£424 now April 2024
Nothing goes down 👍🏻